1988 Toyota Tercel Transmission Parts
More 1988 Toyota Tercel Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1988 Toyota Tercel, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1988 Toyota Tercel Transmission Parts
Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010121551SAK)
from
$12.25
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
National – Bearings (Part No.JL69310)
from
$7.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)
from
$6.79
This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
See More
National – Bearings (Part No.A-1)
from
$13.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Ishino Stone – AT Output Shaft Seal (Part No.J2557187981ISH)
from
$12.96
AT Output Shaft Seal
Carquest Premium – Neutral Safety Switch (Part No.SAA4169)
from
$215.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Anchor – Transmission Mount: Left, 1 Piece (Part No.8175)
from
$19.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 91-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1991-1999
- Weight approx: 2 Lbs
Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-542)
from
$169.99
This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Does not include steels or filter
National – Bearings (Part No.32005)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.220818)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-223605)
from
$5.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.221207)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.30208)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Oil Seal (Part No.S-1174)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.TO33)
from
$147.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
Dorman – Engine Oil Drain Plug (Part No.A6110831350DOR)
from
$5.46
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
- Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
- Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
Timken – AT Manual Shaft Seal (Part No.J23021175804TIM)
from
$10.52
AT Manual Shaft Seal
ATP – AT SEAL DRIVE AXLE (Part No.RO-87)
from
$12.99
AT SEAL DRIVE AXLE
Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)
from
$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.
Product Features:
See More
Product Features:
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
- OEM specified
- Low-odor, non-corrosive formula
- Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)
from
$59.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)
from
$39.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool® plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
Popular 1988 Toyota Tercel Transmission Parts Categories
1988 Toyota Tercel Transmission Parts
You count on your 1988 Toyota Tercel to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 46 Transmission Parts ranging in price from $2.99 to $364.99, you’re sure to find everything you need for your 1988 Toyota Tercel.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 15 different brands like Imperial, Permatex, and National. 1988 Toyota Tercel Transmission Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 686 extensive product reviews on 1988 Toyota Tercel Transmission Parts. Some of the top-rated Transmission Parts products we carry are Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars and Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1988 Toyota Tercel below to get started!
Top-Rated Transmission Parts Brands For Your 1988 Toyota Tercel
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Toyota Tercel running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, National, and even more.
Popular Felpro Transmission Parts
You’ll find popular Felpro brand products across Automatic Transmission Pan and Gaskets. All are waiting to get your 1988 Toyota Tercel back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1988 Toyota Tercel, and some of our most reviewed Imperial parts include:
FAQs for 1988 Toyota Tercel Transmission Parts
What are the most purchased Transmission Parts for the 1988 Toyota Tercel?
Out of 46 Transmission Parts for the 1988 Toyota Tercel, the most popular in our inventory are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
What are the top-rated 1988 Toyota Tercel Transmission Parts?
Top-rated Transmission Parts for your 1988 Toyota Tercel based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
