from

$4.99

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
Intalls next to side gear

from

$579.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$21.99

Product Features:

Intermediate shaft bushing
Fits Dana Spicer 30 and 44 with disconnect axles

from

$162.99

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Dana Spicer 25, 27, 30, 4 and 50

from

$225.99

Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a 10 year warranty against manufacturing defects. horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
4340 Chromoly
Outer stub
27 spline
6.11″ from end of splines to center of u-joint bore

from

$10.79

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$7.99

Wheel Lug Stud

from

$20.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.

Product Features:

3.25 in.
OE Style
Direct Fit
Limited 5 Year Warranty

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$79.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$135.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. This axle bearing & seal kit services one side only.

Product Features:

Fits Dana Spicer 44 JK rear
Includes axle bearing and seal
Services one side

from

$37.99

Product Features:

Axle bearing retainer for Jeep JK rear

from

$15.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$8.99

Product Features:

Inner axle dust shield
Fits Dana Spicer 30

from

$10.99

Outer stub dust shield for Dana 30 XJ, TJ, YJ. 2.738″ I.D.

Product Features:

Outer stub dust shield
Fits Jeep XJ, YJ and TJ

from

$51.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$44.99

SPICER U-JOINT

from

$29.49

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Limited 12 Month Or 12,000 Mile Warranty

from

$10.99

Model 35 C/clip.

Product Features:

c-clip for AMC Model 35

from

$281.99

Yukon replacement pinion flange for non-Rubicon JK front, Dana 30. 24 spline with 8 bolt pattern, 2.620″ tall, 4.846″ seal diameter. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Jeep JK non-Rubicon front
24 spline
8 bolt holes
2.620″ tall

from

$145.99

Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 30 and 44
26 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
Strap style

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$51.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$50.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

Disconnect axle pilot bearing for Dana 30, 44 & 60, 0.813″ O.D.

Product Features:

Axle pilot bearing
Fits Dana Spicer 44 with disconnect axles
0.813″ O.D.

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

1988 Jeep Wrangler Drive Shafts and Axles

More 1988 Jeep Wrangler Drive Shafts and Axles

Essential 1988 Jeep Wrangler Drive Shafts and Axles

Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9316)

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Yukon Gear – 4340 Chrome-Moly Outer Stub For Dana 30, ’95 And Newer Wranger, Uses 5-760X U/Joint (Part No.21361)

Crown Auto Jeep Replacmnt – Red (Part No.83503504)

Yukon Gear – Wheel Lug Stud (Part No.33571)

Omix – U-Bolt (Part No.18204.07)

National – Bearings (Part No.HM88610)

National – Bearings (Part No.M88010)

Crown Auto Jeep Replacmnt – For Use With Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle (Part No.J8126500)

Yukon Gear – Dana 44JK Rear Axle Bearing And Seal Kit Replacement (Part No.10063)

Yukon Gear – Axle Bearing Retainer For Dana 44 JK Rear (Part No.33469)

Crown Auto Jeep Replacmnt – OE Replacement, Dana 44 (Part No.83503077)

Yukon Gear – Inner Axle Dust Shield For Dana 30 (Part No.33442)

Yukon Gear – Outer Stub Dust Shield For Dana 30 XJ, TJ, YJ – 2.738" I.D. (Part No.33021)

Spicer – Universal Joint (Part No.5-760X)

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

Crown Auto Jeep Replacmnt – For Dana 35/ Dana 44, OE Replacement (Part No.68008523AA)

Yukon Gear – Model 35 C/Clip (Part No.33076)

Yukon Gear – Replacement Pinion Flange For Non-Rubicon JK Front, Dana 30 (Part No.41123)

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

National – Multi Purpose Seal (Part No.710202)

National – Multi Purpose Seal (Part No.710068)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Yukon Gear – Disconnect Axle Pilot Bearing For Dana 30, 44 & 60, 0.813" O.D. (Part No.18050)

National – Bearings (Part No.F-4020)

Popular 1988 Jeep Wrangler Drive Shafts and Axles Categories

1988 Jeep Wrangler Drive Shafts and Axles

Drive Shafts and Axles Brands To Make Your 1988 Jeep Wrangler Last

Popular Spicer Drive Shafts and Axles

Top 1988 Jeep Wrangler Drive Shafts and Axles from National

FAQs for 1988 Jeep Wrangler Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1988 Jeep Wrangler?

More Popular Parts for All Makes