1988 GMC C1500 Drivetrains
More 1988 GMC C1500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1988 GMC C1500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1988 GMC C1500 Drivetrains
Belltech – Spindle Assembly, 2 Inch Drop, Iron, Set Of 2 (Part No.2508)
from
$433.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)
from
$28.99
Positraction cross pin bolt for GM 12P and 12T.
Product Features:
See More
Product Features:
- Cross pin bolt for GM 12 bolt passenger car and truck
- For OEM positraction applications only
Yukon Gear – 9.5" GM Cover Gasket (Part No.23023)
Yukon Gear – Bearing Install Kit For GM 8.5" With HD Differential (Part No.11069)
from
$263.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear with aftermarket positraction
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
Pro-King – Differential Axle Bearing (Part No.742G280A)
from
$28.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Steel Spool For GM 8.5" & 8.6" With 30 Spline Axles (Part No.32193)
from
$414.99
Yukon Performance 1-3/4″ deck steel spool for 8.5″ GM with 30 spline axles. Uses large bearings, 1.785 journals. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects. This spool requires the use of a C-Clip eliminator kit to be used.
Product Features:
See More
Product Features:
- Fits GM 8.5″ with 30 spline axles
- 2.73 and up ratios only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)
from
$198.99
Yukon yoke for GM 12 bolt car & truck, 1310 u/joint size, u-bolt design. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Powertrax – Grip LS Traction System (Part No.LS231230)
from
$480.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Pro-King – Pinion Nut (Part No.740A961)
from
$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)
from
$39.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1960-2015
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- NO STUDS
Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)
from
$15.99
Standard open side gear thrust washer for 8.5″ GM.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 8.5″
Yukon Gear – Grizzly Locker For GM 8.5" & 8.6", 30 Spline, 2.73 & Up (Part No.28035)
from
$1153.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″ with 30 spline axles
- 2.73 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Felpro – Differential Cover Gasket (Part No.RDS 55387)
from
$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)
from
$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
USA Standard Gear – Pinion Installation Kit For GM 8.5" Rear (Part No.60012)
from
$115.99
8.5″ GM PINION KIT .
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
Powertrax – No-Slip Traction System (Part No.9207883005)
from
$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)
Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’71-’81 GM 12T 2WD (Part No.21257)
from
$269.99
Yukon 1541H alloy 5 lug rear axle for ’71-’81 GM 12T 2WD with a length of 31-7/16 inches and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.This is a C-clip.
Product Features:
See More
Product Features:
- Fits 1970-1981 GM 12 bolt truck with 2 wheel drive
- 30 spline
- 31 7/16″ long
- 5 lug
Motive Gear – Differential Pinion Shim Kit (Part No.1102)
National – Bearings (Part No.307-FFL5)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Ring and Pinion (Part No.GM9.5-410)
Dorman – Rear Drive Shaft (Part No.936-295)
from
$916.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$59.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.208-LO)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Oil Seal (Part No.S-3638)
Popular 1988 GMC C1500 Drivetrains Categories
1988 GMC C1500 Drivetrains
You count on your 1988 GMC C1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 361 Drivetrains ranging in price from $1.99 to $1,944.99, you’re sure to find everything you need for your 1988 GMC C1500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Moog, Valvoline, and Driveworks. 1988 GMC C1500 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,076 extensive product reviews on 1988 GMC C1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1988 GMC C1500 below to get started!
Top-Rated Drivetrains Brands For Your 1988 GMC C1500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 GMC C1500 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Pennzoil Drivetrains
You’ll find popular Pennzoil brand products across Differentials. All are waiting to get your 1988 GMC C1500 back on the road. Some of the top-rated Pennzoil products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1988 GMC C1500, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1988 GMC C1500 Drivetrains
What are the most purchased Drivetrains for the 1988 GMC C1500?
Out of 361 Drivetrains for the 1988 GMC C1500, the most popular in our inventory are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
What are the top-rated 1988 GMC C1500 Drivetrains?
Top-rated Drivetrains for your 1988 GMC C1500 based on customer reviews/ratings are:
from
$36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”
