1999 GMC C1500 Drivetrains
More 1999 GMC C1500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1999 GMC C1500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1999 GMC C1500 Drivetrains
National – Multi Purpose Seal (Part No.4638N)
from
$4.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)
from
$449.99
Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.49
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
USA Standard Gear – Master Overhaul Kit for ’97-’13 GM 9.5" Differential (Part No.37073)
from
$431.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Pro-King – Pinion Nut (Part No.740A961)
from
$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Bearings (Part No.LM67048)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.8835S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 9.5" GM C/Clip (Part No.33081)
Felpro – Differential Cover G (Part No.J7018977707FEL)
from
$8.28
Differential Cover G
Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)
from
$57.99
Product Features:
See More
- Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
Pro-King – Differential Pinion Shim Kit (Part No.742G200A)
from
$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Shaft Repair Sleeve (Part No.99199)
from
$37.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R12RMK)
from
$131.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG&SL GM 12BLT 8 7/8
Motive Gear – Differential Ring and Pinion (Part No.GM12-456A)
Carquest – Engine Camshaft Position Sensor Connector (Part No.PT196)
from
$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
- Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
- Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
- High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
- Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)
from
$52.99
Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Controlled heat treatment process for strength and durability
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Carrier Case For ’00-’06 GM 8.6" V2 Design (Part No.20096)
from
$232.99
Yukon standard open carrier case for ’00-’06 GM 8.6″, V2 – version 2 design.
Product Features:
See More
Product Features:
- Fits 2000-2006 GM 8.6″ with open differential
Belltech – Spindle Assembly, 2 Inch Drop, Iron, Set Of 2 (Part No.2508)
from
$433.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)
from
$47.99
Eaton positraction shim kit for 9.5″ GM.
Product Features:
See More
Product Features:
- Shim kit
- Fits GM 9.5″ Eaton positraction
Yukon Gear – Pinion Install Kit For ’97 & Down GM 9.5" Differential (Part No.13075)
from
$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1997 and down GM 9.5″
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Steel Spool For GM 8.5" & 8.6" With 30 Spline Axles (Part No.32193)
from
$414.99
Yukon Performance 1-3/4″ deck steel spool for 8.5″ GM with 30 spline axles. Uses large bearings, 1.785 journals. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects. This spool requires the use of a C-Clip eliminator kit to be used.
Product Features:
See More
Product Features:
- Fits GM 8.5″ with 30 spline axles
- 2.73 and up ratios only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Bearing Race Driver (Part No.56017)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM89410 race
- All steel construction
Yukon Gear – 1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM (Part No.41196)
from
$67.99
1310, U/Jnt straps & bolts, 8.5″ front, 12P & 12T GM.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits GM 12 bolt passenger car and truck and 8.5″ front
- 1310 u-joint size
- Includes two straps and four bolts
Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)
from
$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
National – Bearings (Part No.307-FFL5)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1999 GMC C1500 Drivetrains Categories
1999 GMC C1500 Drivetrains
You count on your 1999 GMC C1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 396 Drivetrains ranging in price from $1.99 to $2,369.99, you’re sure to find everything you need for your 1999 GMC C1500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Valvoline, Moog, and Pennzoil. 1999 GMC C1500 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,600 extensive product reviews on 1999 GMC C1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Bearings with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1999 GMC C1500 below to get started!
Top-Rated Drivetrains Brands For Your 1999 GMC C1500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 GMC C1500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Pennzoil, and even more.
Popular Pennzoil Drivetrains
You’ll find popular Pennzoil brand products across Differentials. All are waiting to get your 1999 GMC C1500 back on the road. Some of the top-rated Pennzoil products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1999 GMC C1500, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1999 GMC C1500 Drivetrains
What are the most purchased Drivetrains for the 1999 GMC C1500?
Out of 396 Drivetrains for the 1999 GMC C1500, the most popular in our inventory are:
What are the top-rated 1999 GMC C1500 Drivetrains?
Top-rated Drivetrains for your 1999 GMC C1500 based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
from
$16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
