1988 Ford Taurus Ignition Coils and Boots
More 1988 Ford Taurus Ignition Coils and Boots
Find your specific 1988 Ford Taurus original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Ford Taurus Ignition Coils and Boots
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1013-6)
from
$316.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Motorcraft – Direct Ignition Coil (Part No.F3005424965MTR)
from
$107.01
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1391)
from
$82.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
MSD Ignition – Coil Pack; Street Fire; Ford 6-Tower; DIS 94-00 (Part No.5528)
from
$158.99
MSD is excited to introduce several new coils to the Street Fire line. These coils mount directly in place of factory style versions and accept the OEM connectors as well. Performance output is improved thanks to careful selection of better materials and efficient winding ratios.
Product Features:
See More
Product Features:
- Capacitive Discharge Technology
- Multiple Sparks Improve Starting And Idle
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
- Ensures Combustion/Great Throttle Response
- Smooth Idle
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48856)
from
$79.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Accel – Coil:Ford 6-Tower Dis Vrtcl (Part No.140036)
from
$153.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, optimized winding, resistance and turns ratios to deliver 10-15% more energy than OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct replacements for OEM coils. Must use factory firing order. Bodies and/or secondary towers molded in ACCEL yellow with brass secondary contacts.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- OBD II Compatible Safe
- Standard Motor Products SMP Fd-488
- MSD 5528
Driveworks – Electronic Ignition Coil (Part No.26330)
from
$86.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48768)
from
$98.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Motorcraft – Central Ignition Coil (Part No.F3000383633MTR)
from
$152.57
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)
from
$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Carquest Premium – Spark Plug Wire Set (Part No.35-6175)
from
$53.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Motorcraft – Direct Ignition Coil Boot (Part No.F3006374064MTR)
from
$7.56
The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
DENSO – COP BOOTS (Part No.671-4325)
from
$22.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
See More
DENSO – Coil On Plug Boots-6 (Part No.671-6236)
from
$35.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6089)
from
$44.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 6 Wires (Part No.WR-6033)
from
$186.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.
Product Features:
See More
Product Features:
- Backed by Motorcraft’s Service Parts Warranty
- Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
- Optimized wire lengths help minimize part numbers while still providing proper fit.
- Wires are optimum lengths for easy installation.
- EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
- Motorcraft ignition components help prevent false check engine lights.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7102)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)
from
$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Dorman – Ignition Coil Connector (Part No.645-155)
from
$31.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA3066)
from
$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Coil Connector (Part No.PT2268)
from
$46.49
BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
- Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
- RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)
from
$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Coil Connector (Part No.PTA1082)
from
$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Electrical Harness – 3-Wire Ignition Coil (Part No.85121)
from
$18.29
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest – Ignition Coil Connector (Part No.PT753)
from
$17.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Popular 1988 Ford Taurus Ignition Coils and Boots Categories
1988 Ford Taurus Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1988 Ford Taurus. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 12 different Ignition Coils and Boots in our inventory ranging from $17.05 to $91.99. That means you can find the exact parts or products you need to keep that 1988 Ford Taurus running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Ford Taurus. Carquest Premium, Carquest, and Accel are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1988 Ford Taurus, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 446 reviews in this category, some of the top rated parts include Electronic Ignition Coil with 4.6 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1988 Ford Taurus rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1988 Ford Taurus Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Ford Taurus demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Taurus the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coil Connectors categories, plus more. For a 1988 Ford Taurus, our most popular Carquest Ignition Coils and Boots include:
Top 1988 Ford Taurus Ignition Coils and Boots from Accel
Accel products are another trusted brand when it comes to Ignition Coils and Boots for your 1988 Ford Taurus. Popular Accel parts include:
FAQs for 1988 Ford Taurus Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1988 Ford Taurus?
Out of 12 Ignition Coils and Boots for the 1988 Ford Taurus, the most popular in our inventory are:
from
$37.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$36.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
What are the top-rated 1988 Ford Taurus Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 1988 Ford Taurus based on customer reviews/ratings are:
