1988 Ford E-250 Econoline Ignition Coils and Boots

Essential 1988 Ford E-250 Econoline Ignition Coils and Boots

MSD Ignition – Wire Set; Street Fire; Ford 351W; 400; 460; HEI; 77-on (Part No.5540)

Wire Set; Street Fire; Ford 351W; 400; 460; HEI; 77-on

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

DENSO – Spark Plug Wire Set: Carbon Core, 7 Wire Set (Part No.671-6104)

Spark Plug Wire Set: Carbon Core, 7 Wire Set

from

$34.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 6 Wires (Part No.WR-6110)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 6 Wires

from

$91.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Motorcraft – Motorcraft Ignition Wire Set (Part No.F1020361155MTR)

Motorcraft Ignition Wire Set

from

$70.40
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:
  • OEM quality
  • OEM connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Reduces the chance of misfire
  • Increases engine life
  • Protects against wire set failure
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8164)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

8Mm Super Stock Spiral Uni Bk

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6189)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$27.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

DENSO – Spark Plug Wire Set: Carbon Core, 10 Wire Set (Part No.671-8077)

Spark Plug Wire Set: Carbon Core, 10 Wire Set

from

$66.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Dorman – Ignition Coil Connector (Part No.645-570)

Ignition Coil Connector

from

$43.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Ignition Coil Connector (Part No.PT5764)

Ignition Coil Connector

from

$10.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1082)

Ignition Coil Connector

from

$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTC1111)

Ignition Coil Connector

from

$7.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Ignition Coil Connector (Part No.PT753)

Ignition Coil Connector

from

$17.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)

Air Charge Temperature Sensor Connector

from

$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6000)

Original Equipment Quality Direct Ignition Coil

from

$79.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-535)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$126.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:
  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Ignition Coil: Meets OE Specifications, 1 Count

from

$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Delphi – Ignition Coil (Part No.GN10178)

Ignition Coil

from

$94.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

MSD Ignition – Coil; Ford 4.6/5.4L 2-Valve 98-14 Single (Part No.8242)

Coil; Ford 4.6/5.4L 2-Valve 98-14 Single

from

$54.39
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:
  • Fits 1999-2004 4.6L And 5.4L SOHC 2V
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
  • CARB approved legal for use in all states
See More

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Super Stock Elect Coil Chrome

from

$72.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:
  • Engineered for higher energy output
  • Improved throttle responce
  • More high RPM power
  • Chrome Plated
See More

Driveworks – Ignition Coil (Part No.26326)

Ignition Coil

from

$59.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Motorcraft – Motorcraft Central Ignition Coil (Part No.F3000343175MTR)

Motorcraft Central Ignition Coil

from

$145.99
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:
  • Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
  • Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
  • Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
  • Radio-Frequency Interference (RFI) Suppression
  • Magnets hold strength for the coil to maintain proper energy output
  • Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
  • Coil Housing is engineered to withstand extremes in temperature without cracking
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

Driveworks – Ignition Coil (Part No.26324)

Ignition Coil

from

$89.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-533)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$161.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:
  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
See More

1988 Ford E-250 Econoline Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 1988 Ford E-250 Econoline. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 20 different Ignition Coils and Boots in our inventory ranging from $17.05 to $91.99. That means you can find the exact parts or products you need to keep that 1988 Ford E-250 Econoline running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Ford E-250 Econoline. Carquest Premium, Carquest, and Accel are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 1988 Ford E-250 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 555 reviews in this category, some of the top rated parts include Electronic Ignition Coil with 4.6 stars and Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set with 1.0 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1988 Ford E-250 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 1988 Ford E-250 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Ford E-250 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your E-250 Econoline the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coil Connectors categories, plus more. For a 1988 Ford E-250 Econoline, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil Connector
from $17.05
(2)
Ignition Coil Connector
Ignition Coil Connectors

FAQs for 1988 Ford E-250 Econoline Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1988 Ford E-250 Econoline?

Out of 20 Ignition Coils and Boots for the 1988 Ford E-250 Econoline, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $37.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets OE Specifications, 1 Count
from $36.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil
from $71.99
(3)
Ignition Coil
Ignition Coils

What are the top-rated 1988 Ford E-250 Econoline Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 1988 Ford E-250 Econoline based on customer reviews/ratings are:
Electronic Ignition Coil
from $36.05
(14)
Electronic Ignition Coil
“Fits perfect”
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
from $65.99
(1)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
“The coil wire was 16 in too short. I had to buy a coil wire to install. To put the ends on the spark plug wires I had to order a special tool which de”