from

$57.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$143.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. High volume performance upgrade for M-83. 25% increased volume over stock pump. Gerotor set assembled to an extended drive shaft that allows for additional support in the cover. Supporting the drive shaft in both the housing and cover eliminates dynamic shaft deflection at increased RMP levels. The cover is doweled to pump housing to assure alignment of shaft bores. The housing and cover are CNC machined and phosphate coated for wear and rust prevention. The relief valve has a pressure adjustable screw-in plug instead of a cup plug. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions.

Product Features:

25% Higher volume high performance upgrade of the M-83
CNC machined phosphate coated cast iron housing and
Standard billet steel spur gears
Includes intermediate drive shaft
Works with original 5/8 inch diameter bolt on screen
Includes oil pump and oil pump screen mounting gasket

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$25.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$167.99

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$1.49

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$42.49

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$553.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$10.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$133.99

Fits small block Ford 289-351W. Dress up your engine compartment while meeting all of the State and Government emission requirements by using this Street Legal Dress Up Kit. Each kit includes two chrome valve covers which have two holes on top, designed to accept all OEM PCV and breather hoses, and includes appropriate grommets and components. *SEE catalog for complete listing.

Product Features:

Meets State Emission Requirements
Meets Government Emission Requirements

from

$12.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 54-58;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1954-1958
Weight approx: 3 Lbs
PART GROUP: 2110, 2110

from

$103.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$66.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Face of top rings coated with latest generation Plasma-Moly
Decreases friction
Very resistant to scuffing
Exacting tolerances
Meets or exceeds OEM specifications

from

$272.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$9.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$71.99

High Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. 0.250 in. Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder.
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$33.99

As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:

Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
Professional Quality Fasteners
Delivers ARP Quality And Reliability
Made In USA
2.05″ Underhead Length
Ford 289-460 (except 351C)
Sold Individually
200,000 PSI

from

$89.99

Kits include all gaskets needed for a complete engine overhaul. Cylinder head, intake, exhaust, valve cover and oil pan. Distributor gasket (where applicable), timing cover, fuel pump, thermostat, water pump, and rear main seal. For OE replacement, high performance street, drag race and oval track.

Product Features:

Engineered To Meet Or Exceed OE Specifications
This Kit Includes All Gaskets And Seals
Designed For Complete Rebuild

from

$75.99

Replace your stock black engine pulleys with chrome plated steel pulleys from Mr. Gasket.

Product Features:

Single Groove
Chrome Plated

from

$11.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Validated for fit, form, and function

from

$96.99

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$23.49

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$8.94

Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:

Original equipment design and quality
Utilizes OE equivalent or better materials

from

$27.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$59.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 Psi
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
1″ Adjuster Thread Length
3/8″-24 Shank Diameter and Thread
3/8″ Typical Small Block Application with Roller Rockers

from

$10.29

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features: