1988 Chevrolet K1500 Performance and Racing Products

Essential 1988 Chevrolet K1500 Performance and Racing Products

Energy Suspension – Sway Bar Bushing Set (Part No.3.5136R)

Sway Bar Bushing Set

from

$39.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Edelbrock – Front Timing Cover Gasket Set #6997 For Small-Block Chevy, With Front Seal (Part No.6997)

Front Timing Cover Gasket Set #6997 For Small-Block Chevy, With Front Seal

from

$17.99
Product Features:
  • For Small-Block Chevy
  • One Piece Configuration
  • Includes Front Cover Gasket & Front Seal
  • Includes Necessary Gaskets & Crankshaft Oil Seal
  • For Replacement Or Installation
See More

Hurst – Installation Kit, Competition Plus Shifter (Part No.3733163)

Installation Kit, Competition Plus Shifter

from

$278.99
Installation kit for Hurst Competition Plus shifter. Includes all linkage pieces needed to complete the installation of your Hurst shifter.

Product Features:
  • Competition Plus Shifter Installation Kit
  • Includes Hardware
  • Durable
  • Sold as a Kit
  • Hurst Quality
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128G)

Leaf Spring Bushing Set

from

$99.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

B & M – ShiftPlus, 4L60E and 4L80E (Part No.70380)

ShiftPlus, 4L60E and 4L80E

from

$90.99
The B&M Shift Plus, recalibrates your transmission’s hydraulic system electronically which firms up the shifts and reduces heat and slippage. A simple flip of the switch allows you to choose which shift firmness setting you want to run.

Product Features:
  • Installs In Minutes
  • Reduces Slippage and Heat
  • 50 State Emissions Legal
  • Recalibrates Hydraulic System
  • Recalibrates Electronically
  • Fun and Pleasurable Drive
  • Extends Transmission Life
  • Simple Flip Of Switch
See More

Mr. Gasket – Valve Cover Bolts (Part No.9822)

Valve Cover Bolts

from

$16.99
Chrome plated steel. 1/4-20 x 3-3/8 inch long. Set of 4. Order 2 sets for both valve covers.

Product Features:
  • Chrome Plated
  • Replaces Original Bolt
  • Includes Chrome Plated Washers
See More

MSD Ignition – Wire Set; Street Fire; Chevy Truck 305-350; 85-on (Part No.5562)

Wire Set; Street Fire; Chevy Truck 305-350; 85-on

from

$60.29
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Accel – HEI Distributor Cap & Rotor Kit – Tan – Chevrolet V8 (Part No.8132)

HEI Distributor Cap & Rotor Kit - Tan - Chevrolet V8

from

$47.49
Chevrolet V8 engines with HEI/EST remount mount coil 8132 35362 applications include 1987-93 Cars and 1987-95 Trucks (Supersedes 60110).

Product Features:
  • Features Protection From Arc Thru And Crossfire
  • Features 60K V Rated Alkyd Compound
See More

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.57-3026)

Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Mr. Gasket – Ultra Seal; Timing Cover Bolts (Part No.6090)

Ultra Seal; Timing Cover Bolts

from

$13.29
The special self locking timing cover bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5. Application: Chevy small and big block, 1/4 inch-20 ix 1/2 inch,10 pieces.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4122G)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Head Gasket (Part No.1052G)

Head Gasket

from

$75.99
Mr. Gasket Copper Head Gaskets are manufactured from dead soft solid copper that provides excellent stability and reduces cylinder bore distortion. They can be used with or without stainless steel o-rings. For supercharged, turbocharged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track applications.

Product Features:
  • Manufactured from dead soft copper
  • .020″ thick
  • Provides excellent sealing and durability
  • Conforms to and seals minor surface irregularities
  • For high performance street, drag race, oval track and turbocharged (extreme heat) applications
See More

Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17363)

Dual - 2.5in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$759.99
DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3134G)

Control Arm Bushing Set

from

$78.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet

from

$306.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$99.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

from

$27.99
Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

Product Features:
  • 1.28″x2.10″
  • Stock Port Style
  • .060″ Thick
  • Multi Piece Configuration
  • Composite Material
See More

Hays – Power Train (Part No.90-103)

Power Train

from

$499.99
Power Train

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Dynomax – 43661 Exhaust Pipe (Part No.43661)

43661 Exhaust Pipe

from

$26.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$27.49
Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Tall hex head bolt to prevent wrench from slipping
  • Extra thick parallel ground washer provides accurate, uniform torque
  • Washers Provides More Accurate And Uniform Torque
  • Grade 8 Alloy Steel
See More

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

Popular 1988 Chevrolet K1500 Performance and Racing Products Categories

1988 Chevrolet K1500 Performance and Racing Products

You count on your 1988 Chevrolet K1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 223 Performance and Racing Products ranging in price from $5.99 to $999.99, you’re sure to find everything you need for your 1988 Chevrolet K1500.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 26 different brands like Mr. Gasket, K&N, and Accel. 1988 Chevrolet K1500 Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 677 extensive product reviews on 1988 Chevrolet K1500 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Performance Exhaust Gasket Set for Enhanced Sealing and Durability with 4.6 stars and 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound with 4.1 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1988 Chevrolet K1500 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1988 Chevrolet K1500

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Chevrolet K1500 running right for years to come. In our inventory you’ll find brands like Mr. Gasket, K&N, Accel, and even more.

Popular Flowtech Performance and Racing Products

You’ll find popular Flowtech brand products across Performance Exhaust Products. All are waiting to get your 1988 Chevrolet K1500 back on the road. Some of the top-rated Flowtech products in these categories are:
Real-Seal; Header Gasket
from $85.39
(1)
Real-Seal; Header Gasket
Performance Exhaust Manifold Gaskets

Top-Rated Accel Performance and Racing Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1988 Chevrolet K1500, and some of our most reviewed Accel parts include:
HEI Distributor Cap & Rotor Kit - Tan - Chevrolet V8
from $47.49
(81)
HEI Distributor Cap & Rotor Kit – Tan – Chevrolet V8
Performance Distributor Cap and Rotor Kits
GM 1984-95 Remote Supercoil
from $79.99
(15)
GM 1984-95 Remote Supercoil
Performance Coils
Distributor Cap And Rotor Kit
from $42.99
(5)
Distributor Cap And Rotor Kit
Performance Distributor Cap and Rotor Kits

FAQs for 1988 Chevrolet K1500 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1988 Chevrolet K1500?

Out of 223 Performance and Racing Products for the 1988 Chevrolet K1500, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
Performance Engine Intake Manifold Gaskets

What are the top-rated 1988 Chevrolet K1500 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1988 Chevrolet K1500 based on customer reviews/ratings are:
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
from $20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
“Put new headers on motor”
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
from $99.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“Can’t beat a 40 series 2-chamber for true muscle car sound..”
Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter
from $349.99
(10)
Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter
“Installed in less than 90 minutes. Could see and hear the difference in the engine. Felt more power in low range RPMs. It is worth the money.”