1988 Buick Century Performance and Racing Products
More 1988 Buick Century Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1988 Buick Century, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1988 Buick Century Performance and Racing Products
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Spectre – Aluminum Oil Pan SBC 55-79 (Part No.4987)
from
$337.99
This Spectre polished aluminum oil pan is designed to fit 1955-’79 small block Chevrolet 283-350 engines with a driver’s side dipstick (except 1962-’67 Chevrolet II and Corvette with stock exhaust). This oil pan is made from a heavy die-cast polished aluminum featuring a finned diamond design. The stock oil capacity is maintained at 4 quarts and uses a 1975 and later gasket with thick front seal. The required mounting fasteners are included.
Product Features:
See More
Product Features:
- Stock 4 quart capacity
- Polished die-cast aluminum
- Finned diamond design finish
- Includes mounting fasteners
Mr. Gasket – Oil Pan (Part No.5415)
from
$329.99
This fully polished, finned aluminum oil pan is die-cast for a perfect fit. 5 quart capacity. Drain plug & bolts included.
Product Features:
See More
Product Features:
- Die Cast Aluminum w/ Finned Bottom
- Polished
- Includes Drain Plug and Mounting Bolts
- 5 Quart Capacity
Edelbrock – Victor Jr. 23 Degree Tall Intake Manifold Small-Block Chevy (Part No.2999)
from
$463.99
Edelbrock part #2999 Victor Jr. 23 degree Tall intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. This versatile manifold is excellent for many applications from high-performance’s stree
Product Features:
See More
Product Features:
- Race Winning Design for all Types of Competition
- Single Plane Maximizes Torque and Horsepower
- For Performance in 3500 to 7500 RPM Range
- Exit Ports Closely Match Unported GM Bowtie Heads
- Ports Match GM PN[14011058/14011034/10134392]
- Best for Classes Restricting Porting of Intakes
- Features 1 in. Taller Carb Pad than PN[2972]
Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)
from
$463.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Edelbrock – Valve Cover Gasket Set for Buick (Part No.7546)
from
$35.99
The Edelbrock valve cover gaskets #7546?provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonde
Product Features:
See More
Product Features:
- 0.1875 in. Thickness
- Core-Reinforced-Composite Material
- For Buick 400-455
- Set of 2
- Made In The USA
Mr. Gasket – Valve Cover Gasket Set (Part No.585G)
from
$29.49
Molded rubber gaskets are reusable, great for engines that require valve lash maintenance. These gaskets feature Nitrile material for long life, solid steel carrier for strength and rigidity. Incorporates compression limiters to prevent fastener over-tightening.
Product Features:
See More
Product Features:
- Features Nitrile Rubber Material For Long Life
- Molded Rubber Gaskets Are Reusable
- Ideal For Engine Requiring Valve Lash Maintenance
Mr. Gasket – Head Gasket (Part No.1130G)
from
$32.99
Mr. Gasket Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. With today’s extreme compression ratios you need stronger more durable gaskets. Mr. Gasket steel shim gaskets are made from .020 inch steel shim stock which is thinner than most composite gaskets increasing engine compression. Stress formed embossments will seal the extreme cylinder pressure.
Product Features:
See More
Product Features:
- Manufactured from .020″ steel shim stock.
- Thinner than composition head gaskets – increases engine compression.
- Stress formed embossments seal extreme cylinder pressures.
- For high performance street, drag race and oval track use.
Mr. Gasket – Head Gasket (Part No.1052G)
from
$75.99
Mr. Gasket Copper Head Gaskets are manufactured from dead soft solid copper that provides excellent stability and reduces cylinder bore distortion. They can be used with or without stainless steel o-rings. For supercharged, turbocharged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track applications.
Product Features:
See More
Product Features:
- Manufactured from dead soft copper
- .020″ thick
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
Mr. Gasket – Enhancement Products (Part No.9420)
from
$71.99
Chrome plated steel valve covers have a flat smooth top. Available for numerous applications.
Product Features:
See More
Product Features:
- Flat/smooth top
- Designed to hold valve cover gasket in position
- Made from grade 5 steel
- Long lasting durability
- Cadmium plated to resist corrosion
- Easy installation
Edelbrock – VALVE COVERS (Part No.4249)
from
$117.99
Product Features:
See More
- Polished Finish
- Raised Fins w/Black Mat Background
- Detailed With Allen Hex Heads
- 2 Piece Look; 1 Piece Construction
- Clears Most Roller Rockers
- Clears Valvetrain Components
- Heavy Gauge
Mr. Gasket – Rear Main Seal Gasket (Part No.1960)
from
$23.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Silicone Rubber to Withstand Extreme Engine Oil Temperatures
- Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
- Injection Molded for Precise Fit
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Engine Sealing (Part No.6560)
from
$499.99
Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Made of high temp silicone or nitrile blend rubber
- Torque limiters to prevent over tightening
- One piece molded rubber
- Fits left and right hand dipsticks
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1803)
from
$26.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
Accel – GM 86-99 Dis Supercoil (Part No.140017)
from
$72.99
Re-engineered to be the only true performance AC/Delco style DIS coil. “”Raised Dome”” construction, section bobbin technology, highly specialized silicone magnetic steel core, optimized windings, resistance, and turns ratio result in higher energy and voltage outputs, and longer dwell. Compatible with OE computer controlled ignition systems as well as Crane or MSD capacitive discharge DIS ignition systems. Brass contact increases energy transfer and resists corrosion better than aluminum. High dielectric strength “”ACCEL Yellow”” over molded housing. Packaged as single unit: 4 cyls require 2 coils, 6 cyls require 3 coils and 8 cyls require 4 coils.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-39
- MSD 8224
- Resist Corrosion
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$766.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Tork Master 2400 (Part No.20404)
from
$339.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Holeshot 2000 (Part No.20416)
from
$369.99
HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)
from
$367.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched To Performer Intake PN[5486]
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Popular 1988 Buick Century Performance and Racing Products Categories
1988 Buick Century Performance and Racing Products
You count on your 1988 Buick Century to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 17 Performance and Racing Products ranging in price from $16.29 to $766.99, you’re sure to find everything you need for your 1988 Buick Century.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 7 different brands like K&N, Mr. Gasket, and Accel. 1988 Buick Century Performance and Racing Products start as low as $16.29!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 498 extensive product reviews on 1988 Buick Century Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are GM 86-99 Dis Supercoil with 2.2 stars and PERFORMANCE OIL PAN GASKET SET with 1.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1988 Buick Century below to get started!
Top-Rated Performance and Racing Products Brands For Your 1988 Buick Century
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Buick Century running right for years to come. In our inventory you’ll find brands like K&N, Mr. Gasket, Accel, and even more.
Popular Edelbrock Performance and Racing Products
You’ll find popular Edelbrock brand products across Performance Valve Covers. All are waiting to get your 1988 Buick Century back on the road. Some of the top-rated Edelbrock products in these categories are:
from
$73.99
(1)
Signature Series Valve Covers: Buick 3.8L & 4.1L V6 1977 & Later, Chrome Steel
Performance Valve Covers
Top-Rated K&N Performance and Racing Products
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 1988 Buick Century, and some of our most reviewed K&N parts include:
from
$17.99
(47)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$17.99
(29)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for 1988 Buick Century Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1988 Buick Century?
Out of 17 Performance and Racing Products for the 1988 Buick Century, the most popular in our inventory are:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
from
$27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
What are the top-rated 1988 Buick Century Performance and Racing Products?
Top-rated Performance and Racing Products for your 1988 Buick Century based on customer reviews/ratings are:
from
$18.29
(3)
PERFORMANCE OIL PAN GASKET SET
“This part is incorrectly listed as fitting a 2007 Pontiac Grand Prix. It’s not Advanced’s fault as EVERY shop and site has this part listed for that v”
from
$76.99
(1)
Coil; GM Coil Pack; 2 Tower Style
“These are easy to install. I suggest getting the ignition controller as well. The mounts are necessary for that.”
