1987 Volkswagen Golf Drivetrains
Find Your Specific 1987 Volkswagen Golf Drivetrains
Below you will find various in-demand Volkswagen Drivetrains, components and accessories for your 1987 Golf. Advance Auto Parts has popular Golf parts like Drive Shafts and Axles, CV Axles and Joints, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other Golf model years including
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2022 and more. Select a category of 1987 Volkswagen Golf Drivetrains below and start saving instantly.
Popular 1987 Volkswagen Golf Drivetrains Categories
Essential Drivetrains for 1987 Volkswagen Golves
Febi – Drive Flange Cap (Part No.J800352306FEB)
from
$4.19
Drive Flange Cap
Febi – Axle Shaft Nut (Part No.K4030229650FEB)
from
$10.36
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Febi – CV Joint Bolt (Part No.K6050344789FEB)
from
$4.62
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.32010-X)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
FAG US – CUP (Part No.LM67010)
from
$6.69
CUP
Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1726M)
from
$20.29
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Driveworks – Oil Seal (Part No.S-225010)
GKN Drivetech – CV Boot Kit (Part No.K601019434LOB)
from
$21.40
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Beck/Arnley – Seal Drive Axle Flange (Part No.052-3593)
from
$23.39
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
GKN Drivetech – CV Boot Clamp (Part No.K603029990GKN)
from
$1.89
SPIDAN and LOBRO Clamps are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the clamp.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)
from
$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
Dorman – Spindle Retainer M16-1.0 Hex Size 24mm (sold by each) (Part No.615-083)
from
$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Roller Bearing (Part No.S-32010X)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72047)
from
$86.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Spindle Nut M16-1.0 Hex Size 24 mm (Part No.615-082.1)
from
$15.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – CV Boot Kit (Part No.BKN0124)
from
$26.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Beck/Arnley – Cu Boot Kit (Part No.103-2147)
from
$46.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Meyle – CV Joint Kit (Part No.K6000229942MEY)
from
$73.31
Using state-of-the-art production methods MEYLE C.V. joints are manufactured to highest quality standards. All components are precision-manufactured and perfectly geared to one another. MEYLE supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.
Product Features:
See More
Product Features:
- Highly resilient axle boot
- Induction-hardened rolling body raceways
- Precision-honed serration
Meyle – CV Joint Kit (Part No.K6000152443MEY)
from
$80.96
Using state-of-the-art production methods MEYLE C.V. joints are manufactured to highest quality standards. All components are precision-manufactured and perfectly geared to one another. MEYLE supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.
Product Features:
See More
Product Features:
- Highly resilient axle boot
- Induction-hardened rolling body raceways
- Precision-honed serration
Dorman – Spindle Washer – I.D. 16.7 mm O.D. 34.0 mm Thickness 3.2 mm (Part No.618-021.1)
from
$8.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 16.7mm O.D. 34.0mm Thickness 3.2mm (sold by each) (Part No.618-021)
from
$7.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Vaico – Stub Axle (Part No.K5000418979VCO)
from
$28.69
The Vaico Stub Axle is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Vaico – Stub Axle (Part No.K500019585VCO)
from
$41.55
The Vaico Stub Axle is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Oil Seal (Part No.S-1174)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.710651)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Upgrade your 1987 Volkswagen Golf with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1987 Volkswagen Golf, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Drivetrains are key to keeping your Golf functioning at its best. At Advance Auto Parts, we offer a wide selection of 54 Drivetrains for the 1987 Volkswagen Golf, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
CV Axles and Joints
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1987 Volkswagen Golf at great prices.
Our Drivetrains inventory for this model
ranges from just $1.89 to $141.08, with
an average price of $36.10.
Our 54 Drivetrains in stock come from 20 trusted brands, so you’re sure to find the right part for your 1987 Volkswagen Golf without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Volkswagen Golf, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline, Dorman, Driveworks, and more.
Valvoline Drivetrains
start at just $35.99 and boast an impressive 5 stars average rating from customers.
Dorman and Driveworks also bring quality to the table, with Drivetrains available starting at $2.29, and at an average 4 stars rating.
With 389 customer reviews and counting, our 1987 Volkswagen Golf Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1987 Volkswagen Golf is always ready to roll. We’re committed to providing you with everything you need to keep your Golf in top shape, all in one place.
Start shopping confidently below for your 1987 Volkswagen Golf!
Best-Selling Drive Shafts and Axles for 1987 Volkswagen Golves
Enhance the driving experience in your Volkswagen with 13 quality Drive Shafts and Axle components, starting at $4.19.
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72015)
from
$84.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72017)
from
$79.99
N
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Beck/Arnley – Seal Drive Axle Flange (Part No.052-3593)
from
$23.39
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72014)
from
$77.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembl
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Beck/Arnley – Axle Nuts (Part No.103-0507)
from
$5.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Driveworks – Oil Seal (Part No.S-225010)
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Autopart International Inc – Axle Assembly (Part No.K40001915209API)
from
$135.27
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40001903569API)
from
$111.40
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40001984037API)
from
$99.04
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40002069668API)
from
$87.27
Axle Assembly
Vaico – Stub Axle (Part No.K500019585VCO)
from
$41.55
The Vaico Stub Axle is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Febi – Drive Flange Cap (Part No.J800352306FEB)
from
$4.19
Drive Flange Cap
Most Popular 1987 Volkswagen Golf CV Axles and Joints
Customize your Volkswagen with 24 CV Axles and Joints products
like OE CV Boot Kits,
CV Quick Boot Kits, and
CV Joint and Boot Kits, all
priced under $141.08.
Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)
from
$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)
from
$35.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)
from
$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – CV Joint Gasket (Part No.K608064081RIN)
from
$6.69
CV Joint Gasket
Meyle – CV Joint Kit (Part No.K6000152443MEY)
from
$80.96
Using state-of-the-art production methods MEYLE C.V. joints are manufactured to highest quality standards. All components are precision-manufactured and perfectly geared to one another. MEYLE supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.
Product Features:
See More
Product Features:
- Highly resilient axle boot
- Induction-hardened rolling body raceways
- Precision-honed serration
Rein – CV Boot Kit (Part No.BKN0027R)
from
$30.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
EMPI – RE CV Joint Boot Kit (Part No.K6010182714EMP)
from
$34.89
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
GKN Drivetech – CV Joint Kit (Part No.K600017990LOB)
from
$141.08
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
GKN Drivetech – CV Joint Kit (Part No.K600017991LOB)
from
$128.74
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
GKN Drivetech – CV Joint Kit (Part No.K6000324804LOB)
from
$117.70
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
Graf – CV Joint Kit (Part No.K600019431GRA)
from
$92.60
CV Joint Kit
GKN Drivetech – CV Boot Kit (Part No.K6010106695GKN)
from
$59.58
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K601025097LOB)
from
$34.52
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K601017992LOB)
from
$32.00
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Beck/Arnley – Cu Joint Boot Kit (Part No.103-2110)
from
$28.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Rein – CV Boot Kit (Part No.BKN0024R)
from
$24.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Rein – CV Boot Kit (Part No.BKN0008R)
from
$21.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
GKN Drivetech – CV Boot Kit (Part No.K601019434LOB)
from
$21.40
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K601034304LOB)
from
$20.99
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Rein – CV Boot Kit (Part No.BKN0006R)
from
$14.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Rein – CV Boot (Part No.BKB0003R)
from
$12.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Direct Fit for easy replacement.
- Resistant to heat, salt, road debris, oil and other contaminants
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
CRP – CV Boot Clamp (Part No.K603017738CRP)
from
$3.17
CV Boot Clamp
Febi – CV Joint Bolt (Part No.K6050439247FEB)
from
$2.17
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
GKN Drivetech – CV Boot Clamp (Part No.K603029990GKN)
from
$1.89
SPIDAN and LOBRO Clamps are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the clamp.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Top Picks for 1987 Volkswagen Golf Differentials
Upgrade Volkswagen Golves with top-quality Differentials parts, including 6 OEM and aftermarket selections for your 1987 model.
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)
Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1726M)
from
$20.29
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
FAG – Output Shaft Bearing (Part No.J1053531226FAG)
from
$12.68
Output Shaft Bearing
Worldpac – DIFFERENTIAL DRAIN P (Part No.J70651322441VNE)
from
$11.02
DIFFERENTIAL DRAIN P
FAG US – CUP (Part No.LM67010)
from
$6.69
CUP
In-Demand Transfer Cases for 1987 Volkswagen Golves
Select from 4 premium Transfer Cases parts for your 1987 Volkswagen Golf, with prices ranging from $6.29 to $36.74.
Driveworks – Oil Seal (Part No.S-1174)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG – Wheel Bearing Kit (Part No.K802037953FAG)
from
$36.74
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Wheel bearing kits include required components for complete bearing replacement
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
- Specific roller and raceway profiles
NTN – BCA Wheel Bearing (Part No.K8000183248NTN)
from
$21.55
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
FAG US – SHAFT SEAL (Part No.SS2345)
from
$11.99
SHAFT SEAL
Most Sold 1987 Volkswagen Golf Spindles
Explore our best-selling Volkswagen parts for the 1987 Golf among 7 OEM and aftermarket options starting from $2.29.
Dorman – Spindle Nut M16-1.0 Hex Size 24 mm (Part No.615-082.1)
from
$15.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut M16-1.0 Hex Size 24mm (sold by each) (Part No.615-082)
from
$2.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 21.5mm O.D. 36.0mm Thickness 3.7mm (sold by each) (Part No.618-015)
from
$4.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 16.7 mm O.D. 34.0 mm Thickness 3.2 mm (Part No.618-021.1)
from
$8.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Distorted Thread Spindle Nut M20-1.5 Hex Size 30 mm (Part No.615-107.1)
from
$42.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 16.7mm O.D. 34.0mm Thickness 3.2mm (sold by each) (Part No.618-021)
from
$7.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Retainer M16-1.0 Hex Size 24mm (sold by each) (Part No.615-083)
from
$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Drivetrains Brands For Your 1987 Volkswagen Golf
Shop for the best-rated brands offering Drivetrains and other products for your 1987 Volkswagen Golves. Below you’ll find some of our best rated Drivetrains from Valvoline, Dorman, and Driveworks, and more. Drivetrains from these brands that fit a 1987 Golf start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1987 Volkswagen Golf Drivetrains
When it comes to maintaining or upgrading your 1987 Volkswagen Golf, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1987 Volkswagen Golf. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99. Plus, with over 17 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 1987 Volkswagen Golf Drivetrains
Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 1987 Volkswagen Golf owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1987 Golf, Advance Auto Parts carries a full inventory of 10 Dorman Drivetrains. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Dorman Drivetrains range from $2.29 to $42.49, plus, with more than 55 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$4.99
$4.99
This product is not rated
Spindle Washer – I.D. 21.5mm O.D. 36.0mm Thickness 3.7mm (sold by each)
“”
FAQs for 1987 Volkswagen Golf Drivetrains
Which Drivetrains are best-sellers for 1987 Volkswagen Golves?
Out of 54 Drivetrains that fit 1987 Volkswagen Golves, the following parts are the top sellers:
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Oil Seal (10426042) – $4.49
- Shaft Repair Sleeve (18445083) – $41.99
What’s the price range for 1987 Volkswagen Golf Drivetrains?
Drivetrain prices for the 1987 Volkswagen Golf start at $1.89 and go up to $141.08 for the most premium parts.
What’s the average price of a Drivetrain for a 1987 Volkswagen Golf?
The average price for Drivetrains for the 1987 Volkswagen Golf is $36.10. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Volkswagen Golf model years?
What are the cheapest Drivetrains for my 1987 Volkswagen Golf?
The cheapest 1987 Volkswagen Golf Drivetrains we carry in stock are:
- CV Boot Clamp (10751995) – $1.89
- CV Joint Bolt (10784799) – $2.17
- Spindle Retainer M16-1.0 Hex Size 24mm (sold by each) (22149127) – $2.29
- Spindle Nut M16-1.0 Hex Size 24mm (sold by each) (22149128) – $2.99
- CV Boot Clamp (12148307) – $3.17
What are the top-rated Drivetrains that fit the 1987 Volkswagen Golf?
Out of 389 reviews by customers, our 1987 Volkswagen Golf Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1987 Volkswagen Golf and their top-rated products:
What types of Drivetrains do you sell for my 1987 Volkswagen Golf?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1987 Volkswagen Golf:
Can I get help with 1987 Volkswagen Golf Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Drivetrains and more.
What is your return policy for Volkswagen Golf Drivetrains?
Advance Auto Parts keeps returns simple. For new Volkswagen Golf Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
