1987 Ford F-350 Pickup Drivetrains
More 1987 Ford F-350 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1987 Ford F-350 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1987 Ford F-350 Pickup Drivetrains
Yukon Gear – Pinion Install Kit For Dana 70-HD & Super-70 Differential (Part No.13034)
from
$324.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70HD
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 50 Pinion Seal Replacement (Part No.30128)
from
$17.99
Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Dana Spicer 25, 27, 30, 40 and 50
Driveworks – Transfer Case Input Shaft Seal (Part No.S-714503)
Powertrax – Grip PRO Traction System (Part No.GT436035)
from
$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Driveworks – Tapered Roller Bearing (Part No.S-A-9)
MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330 & 331
- Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)
from
$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Rugged Ridge – Locking Hub (Part No.15001.18)
from
$286.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-033.1)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Carrier Shim Kit (Part No.1106)
Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)
Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)
from
$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 1.830″ I.D.
- 10 outer tabs
Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)
from
$47.99
Plug adapter for extra-large clamshell. No Return.
Product Features:
See More
Product Features:
- Plug adapter for Extra Large clamshell
- Fits carrier bearing puller
Driveworks – Needle Bearing (Part No.S-B-2110)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Yukon Gear – Zip Locker For Ford 10.25" & 10.5", Full Float Only (Part No.34025)
from
$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Ford 10.25″ and 10.5″
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Driveworks – Oil Seal (Part No.S-3173)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Transfer Case Adapter Gasket (Part No.55484)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Bearing Race Driver (Part No.56014)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88510 race
- All steel construction
Yukon Gear – Dana 50/60 Rear Axle Bearing And Seal Kit Replacement (Part No.10009)
from
$148.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for Dana 50 and 60, ’78 to ’97 Ford, ’78 to ’88 Chevy, and ’74 to ’93 Dodge front. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1978-1997 Ford, 1978-1988 GM and 1974-1993 Dodge 1-Ton fronts
- Includes inner and outer bearings and races and axle seal
- Services one side
Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)
from
$102.99
Axle Shft Univ Joint
Yukon Gear – Differential (Part No.26039)
from
$869.99
Differential
Yukon Gear – Axle O-Ring For Ford 10.25" & 10.5" (Part No.33465)
Yukon Gear – Super Carrier Shim Kit For Ford 10.25" (Part No.55004)
from
$48.99
10.25″ Ford carrier Supershims.
Product Features:
See More
Product Features:
- Super carrier shim kit for Ford 10.25″ and 10.5″
- Interlocking design makes installation much easier
Popular 1987 Ford F-350 Pickup Drivetrains Categories
1987 Ford F-350 Pickup Drivetrains
You count on your 1987 Ford F-350 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 517 Drivetrains ranging in price from $2.59 to $1,910.00, you’re sure to find everything you need for your 1987 Ford F-350 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 26 different brands like Moog, Valvoline, and Driveworks. 1987 Ford F-350 Pickup Drivetrains start as low as $2.59!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,556 extensive product reviews on 1987 Ford F-350 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Greaseable Super Strength Universal Joint with 3.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1987 Ford F-350 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1987 Ford F-350 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Ford F-350 Pickup running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1987 Ford F-350 Pickup back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1987 Ford F-350 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1987 Ford F-350 Pickup Drivetrains
What are the most purchased Drivetrains for the 1987 Ford F-350 Pickup?
Out of 517 Drivetrains for the 1987 Ford F-350 Pickup, the most popular in our inventory are:
What are the top-rated 1987 Ford F-350 Pickup Drivetrains?
Top-rated Drivetrains for your 1987 Ford F-350 Pickup based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“Attractive, affordable option. Easy installation, works well so far.”
