1997 Ford F-350 Pickup Drivetrains

Popular 1997 Ford F-350 Pickup Drivetrains Categories

Essential Drivetrains for 1997 Ford F-350 Pickups

Pro-King – Differential Internal Nest Kit (Part No.717A717C)

Differential Internal Nest Kit

from

$606.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT423)

Remanufactured Transfer Case

from

$1721.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

Yukon Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.10 & Down (Part No.32169)

Steel Spool For Dana 60 With 30 Spline Axles, 4.10 & Down

from

$519.99
Yukon Performance steel spool for Dana 60 with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 60 with 30 spline axles
  • 4.10 and down ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Front 4340 Chrome-Moly Replacement Axle Kit For ’88-’98 Ford, Dana 60 With 35 Splines (Part No.21403)

Front 4340 Chrome-Moly Replacement Axle Kit For '88-'98 Ford, Dana 60 With 35 Splines

from

$2030.00
Yukon front 4340 Chrome-Moly replacement axle kit for ’88-’98 Ford, Dana 60 with 35 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Yukon Superjoints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 35 spline inner and outer axles
  • Fits Dana Spicer 60 in 1988-1998 F350
  • Includes inner and outer 4340 Chromoly axles and Yukon Super Joints
See More

USA Standard Gear – Bearing Kit For Dana 70HD & Super-70 (Part No.58002)

Bearing Kit For Dana 70HD & Super-70

from

$384.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Dana Spicer 70HD
  • Fits Dana Spicer Super 70
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.
See More

Driveworks – Oil Seal (Part No.S-722108)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford (Part No.33241)

Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford

from

$11.99
Cross pin bolt with 5/16 x 18 thread for 10.25″ Ford.

Product Features:
  • Cross pin bolt for Ford 9.75″ and 10.25″ with c-clip axles
  • 5/16″ x 18 thread
See More

MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)

Universal Joint U-Bolt Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 353, 354, 361, 369 & 497
  • Fits 1-1/16″ bearings
See More

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Bearing Race Driver (Part No.56013)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM807010 race
  • All steel construction
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Front Differential (Part No.12077)

Minor Install Kit For Dana 60 And 61 Front Differential

from

$169.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 front
  • Included are a pinion seal, axle seals, crush sleeve , complete shim kit, marking compound and brush.
See More

National – Wheel Bearing and Seal Kit (Part No.SBK-3)

Wheel Bearing and Seal Kit

from

$29.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Spindle bearing and seal kit
  • Includes all components required to complete the repair
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)

Universal Joint Strap Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 330 & 331
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
See More

Yukon Gear – Replacement Side Gear Thrust Washer For Spicer 50 (Part No.33438)

Replacement Side Gear Thrust Washer For Spicer 50

from

$7.99
Replacement side gear thrust washer for Spicer 50 .

Product Features:
  • Side gear thrust washer
  • Fits Dana Spicer 50
See More

Yukon Gear – Pinion Gear Thruster Washer For 10.25" Ford (Part No.33294)

Pinion Gear Thruster Washer For 10.25" Ford

from

$9.99
Pinion gear thruster washer for 10.25″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 10.25″
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

RngPnnInstlKt

from

$59.99
RngPnnInstlKt

Yukon Gear – Ford 10.25" C/Clip (Part No.33078)

Ford 10.25" C/Clip

from

$22.99
Ford 10.25″ C/clip.

Product Features:
  • C-clip
  • Fits Ford 10.25″
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-542)

Differential Pinion Yoke Assembly

from

$111.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Replacement Front Spindle For Dana 60 Ford, 5 Holes (Part No.32254)

Replacement Front Spindle For Dana 60 Ford, 5 Holes

from

$374.99
Replacement front spindle for Dana 60 Ford, 5 holes, 7″ long, 6.5″ flange, 2.020×2.255bearing.

Product Features:
  • Fits 1978-1979 Ford F250 and 1985-1998 Ford F350 with Dana Spicer front
  • 7.00″ tall
  • 6.5″ flange
  • 5 bolt holes
  • 2.255″ and 2.020″ bearing journals
See More

Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS

from

$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

Product Features:
  • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
  • 1.830″ I.D.
  • 10 outer tabs
See More

Milemarker – MileMarker Supreme; Manual Hub (Part No.459S/S)

MileMarker Supreme; Manual Hub

from

$313.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

Product Features:
  • Ultimate In Style And Service
  • Latest Patented Technology
  • Smooth Operation
  • Limited Lifetime Warranty
See More

Milemarker – Locking Hub Replacement Parts (Part No.449SK)

Locking Hub Replacement Parts

from

$36.99
For Mopar transfer case 203 N.P. pn(602). 4 x 2 conversion kit service part.

Product Features:
  • 4 x 2 Conversion Kit Service Part; Manual Hubs
See More

Yukon Gear – Ford 10.25" Rear Axle Bearing And Seal Kit (Part No.10034)

Ford 10.25" Rear Axle Bearing And Seal Kit

from

$274.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for 10.25″ Ford (full-floating). This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford 10.25″
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

Milemarker – Hub Conversion Kit (Part No.95-32721)

Hub Conversion Kit

from

$115.99
Converts automatic to manual.

Product Features:
  • Hub Conversion Kit
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 1997 Ford F-350 Pickup with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1997 Ford F-350 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your F-350 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 638 Drivetrains for the 1997 Ford F-350 Pickup, designed to meet your needs without breaking the bank. From Transfer Case replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1997 Ford F-350 Pickup at great prices. Our Drivetrains inventory for this model ranges from just $2.59 to $2,784.99, with an average price of $314.47. Our 638 Drivetrains in stock come from 28 trusted brands, so you’re sure to find the right part for your 1997 Ford F-350 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F-350 Pickup, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, Driveworks, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $4.49, and at an average 4 stars rating. With 2,044 customer reviews and counting, our 1997 Ford F-350 Pickup Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Ford F-350 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-350 Pickup in top shape, all in one place. Start shopping confidently below for your 1997 Ford F-350 Pickup!

Best-Selling Transfer Cases for 1997 Ford F-350 Pickups

Enhance the driving experience in your Ford with 29 quality Transfer Case components, starting at $2.99.

Driveworks – Taper Bearing Cup (Part No.S-15245)

Taper Bearing Cup

from

$5.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.15101)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.4503N)

Multi Purpose Seal

from

$21.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.714503)

Multi Purpose Seal

from

$30.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Transfer Case Gasket (Part No.917-522)

Transfer Case Gasket

from

$10.79
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications.
  • Effective fix – restores a tight seal in the transfer case after original gasket fails.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – 4WD Control Lever Shift Linkage (Part No.600-602)

4WD Control Lever Shift Linkage

from

$237.99
This transfer case control lever directly replaces the original equipment lever for specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD shift linkage matches the fit and function of the original equipment on certain vehicle applications.
  • Effective fix – restores proper operation after original lever fails.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Felpro – Transfer Case Adapter Gasket (Part No.55484)

Transfer Case Adapter Gasket

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Transfer Case Bearing and Seal Kit (Part No.T1356R)

Transfer Case Bearing and Seal Kit

from

$94.49


Product Features:
  • BW1356 BEARING & SEAL KIT ALSO 1370 (W/O THE CENTER PLATE)
See More

National – Bearings (Part No.210)

Bearings

from

$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – TCaseGasketSealKit (Part No.74231)

TCaseGasketSealKit

from

$43.99
TCaseGasketSealKit

EVO Driveline – Remanufactured Transfer Case (Part No.UMT423)

Remanufactured Transfer Case

from

$1721.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT416-1)

Remanufactured Transfer Case

from

$1432.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

USA Standard Gear – TRANSFER CASE PARTS (Part No.75662)

TRANSFER CASE PARTS

from

$199.99
TRANSFER CASE PARTS

USA Standard Gear – TRANSFER CASE PARTS (Part No.73701)

TRANSFER CASE PARTS

from

$164.99
TRANSFER CASE PARTS

USA Standard Gear – TCaseBrg-SealKit (Part No.74128)

TCaseBrg-SealKit

from

$145.99
TCaseBrg-SealKit

USA Standard Gear – TCaseBrg-SealKit (Part No.71640)

TCaseBrg-SealKit

from

$115.99
TCaseBrg-SealKit

SKF – Trans Case Output Sh (Part No.J7121223394SKF)

Trans Case Output Sh

from

$64.47
Trans Case Output Sh

National – Bearings (Part No.308)

Bearings

from

$46.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Timken – Trans Case Output Sf (Part No.J7121366772TIM)

Trans Case Output Sf

from

$36.72
Trans Case Output Sf

FAG US – BEARING (Part No.6208-C3)

BEARING

from

$24.79
BEARING

SKF – Trans Case Output Sh (Part No.J7121366773SKF)

Trans Case Output Sh

from

$18.40
Trans Case Output Sh

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

Driveworks – Tapered Roller Bearing (Part No.S-3920)

Tapered Roller Bearing

from

$14.79
Product Features:
  • Brand may vary by location
See More

Dorman – Transfer Case Gasket (Part No.J71331098749DOR)

Transfer Case Gasket

from

$13.10
Transfer Case Gasket

Driveworks – Transfer Case Input Shaft Seal (Part No.S-714503)

Transfer Case Input Shaft Seal

from

$10.49
Product Features:
  • Brand may vary by location
See More

Autopart International Inc – Trans Case Output Sh (Part No.J71212043276API)

Trans Case Output Sh

from

$9.56
Trans Case Output Sh

USA Standard Gear – TCase Thrust Washer (Part No.74506)

TCase Thrust Washer

from

$5.99
TCase Thrust Washer

USA Standard Gear – Seal (Part No.75624)

Seal

from

$2.99
Seal

Most Popular 1997 Ford F-350 Pickup Differentials

Customize your Ford with 437 Differentials products like Differential Oil, Rear Differential Cover Gaskets, and Differential Covers, all priced under $2,784.99.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Felpro – Differential Cover Gasket (Part No.RDS 55394)

Differential Cover Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Oil Seal (Part No.S-4278)

Oil Seal

from

$9.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.HM89443)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.387A)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Motive Gear – Differential Ring and Pinion (Part No.D70-410)

Differential Ring and Pinion

from

$245.99


Product Features:
  • DANA-70 R/P 4.10 STD MG 72154-5X .625″ OFFSET
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Taper Bearing Set (Part No.S-A-38)

Taper Bearing Set

from

$13.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.208)

Bearings

from

$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)

Ford 10.25" & 10.5" Cover Gasket

from

$13.99
10.25″ & 10.5″ cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 10.25″ and 10.5″
See More

Dorman – Rear Differential Cover (Part No.697-704)

Rear Differential Cover

from

$63.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Pinion Crush Sleeves

from

$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.719316)

Multi Purpose Seal

from

$23.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Ring Gear Bolt For Ford 10.25" & 10.5"

from

$6.99
Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:
  • Ring gear bolt for Ford 10.25″ and 10.5″
  • 1/2″ x 20 thread
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

National – Bearings (Part No.HM88542)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)

Repleacement Ring Gear Bolt For Dana 80

from

$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 80
  • 9/16″ x 18 thread
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88510)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

National – Bearings (Part No.453X)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

National – Bearings (Part No.HM89411)

Bearings

from

$26.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM803110)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

from

$19.99
Product Features:
  • Pinion preload shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

National – Bearings (Part No.382S)

Bearings

from

$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Differential Pinion Shim Kit

from

$13.99


Product Features:
  • PINION SHIM – DANA 70 ALL
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

ATP – DIFF COVER KIT (Part No.111105)

DIFF COVER KIT

from

$61.99
DIFF COVER KIT

Motive Gear – Differential Carrier Shim Kit (Part No.1106)

Differential Carrier Shim Kit

from

$18.99


Product Features:
  • CARRIER SHIM-DANA 60 & 70
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

Tapered Roller Bearing

from

$20.29
Product Features:
  • Brand may vary by location
See More

Top Picks for 1997 Ford F-350 Pickup Universal Joints

Upgrade Ford F-350 Pickups with top-quality Universal Joints parts, including 68 OEM and aftermarket selections for your 1997 model.

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.374)

Greaseable Premium Universal Joint

from

$59.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)

Universal Joint Strap Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 330 & 331
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
See More

Spicer – Universal Joint (Part No.5-213X)

Universal Joint

from

$39.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)

Universal Joint U-Bolt Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 375, 430, 434 & 498
  • Fits 1-1/8″ bearings
See More

Brute Force – Universal Joint (Part No.2-4900BF)

Universal Joint

from

$6.79
Universal Joint – Brute Force
See More

Neapco – Universal Joint (Part No.1-0025)

Universal Joint

from

$2.59
Universal Joint Strap Kit
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Driveworks – Universal Joint (Part No.DW-354)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Universal Joint (Part No.DW-374)

Universal Joint

from

$33.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Driveworks – Universal Joint (Part No.DW-434)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Universal Joint (Part No.DW-331)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

Non-Greaseable Super Strength Universal Joint

from

$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Greaseable Premium Universal Joint

from

$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.434)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Dorman – Help – U-Joint Bolt Kit (Part No.81004)

U-Joint Bolt Kit

from

$6.29
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Neapco – Universal Joint (Part No.3-0332)

Universal Joint

from

$15.99
Universal Joint
See More

Brute Force – Universal Joint (Part No.2-0053BF)

Universal Joint

from

$8.39
Universal Joint – Brute Force
See More

Neapco – Universal Joint (Part No.2-4801)

Universal Joint

from

$7.89
Universal Joint
See More

Neapco – Universal Joint (Part No.2-4800)

Universal Joint

from

$4.59
Universal Joint
See More

Driveworks – Universal Joint (Part No.DW-270)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Brute Force – Universal Joint (Part No.2-4800BF)

Universal Joint

from

$5.49
Universal Joint – Brute Force
See More

Neapco – Universal Joint (Part No.2-0053)

Universal Joint

from

$5.39
Universal Joint
See More

Spicer – Universal Joint (Part No.5-1330X)

Universal Joint

from

$37.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.265)

Greaseable Super Strength Universal Joint

from

$30.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.608)

Double Cardan CV Centering Yoke

from

$105.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.271)

Non-Greaseable Super Strength Universal Joint

from

$73.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Spicer – Universal Joint (Part No.5-1204X)

Universal Joint

from

$36.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-7438X)

Universal Joint

from

$46.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

1310 U/Joint With Zerk Fitting On Cross

from

$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.272)

Greaseable Super Strength Universal Joint

from

$72.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.264)

Non-Greaseable Super Strength Universal Joint

from

$30.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

1310 To 1330 Adapter U/Joint

from

$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

from

$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1310 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)

1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit

from

$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.

Product Features:
  • u-joint u-bolt kit
  • Fits 1350 and 1410 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

1350 To 1410 Conversion U/Joint

from

$78.99
Yukon 1350 to 1410 conversion u/joint.
See More

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

1310 To Mechanics 3R Adapter U/Joint

from

$109.99
Yukon 1310 to Mechanics 3R adapter U/Joint.
See More

Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

1350 Lifetime Series U/Joint

from

$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
See More

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

1330 Dual-Size Cap U/Joint

from

$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More

Yukon Gear – 1480 Lifetime Series U/Joint (Part No.42023)

1480 Lifetime Series U/Joint

from

$98.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ span ring span. 1.375″ cap diameter. Outside snap ring. This U/Joint is a driveline U/Joint.
See More

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

1350 U/Joint With Zerk Fitting

from

$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More

Yukon Gear – (4) Full Circle Snap Rings, Fits Dana 60 733X U-Joint With Aftermarket Axle (Part No.32085)

(4) Full Circle Snap Rings, Fits Dana 60 733X U-Joint With Aftermarket Axle

from

$18.99
(4) Full Circle snap rings, fits Dana 60 733X U-joint with aftermarket axle.

Product Features:
  • Set of four full circle snap rings for Dana Spicer 60
See More

Yukon Gear – 1480 U-Bolt Kit (Part No.41191)

1480 U-Bolt Kit

from

$52.99
1480 U-bolt kit.

Product Features:
  • U-Bolt kit
  • 1480 u-joint size
See More

Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

1330 Lifetime U/Joint

from

$53.99
1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-547)

Differential Pinion Yoke Assembly

from

$202.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

1330 U/Joint With Zerk Fitting

from

$51.99
Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

In-Demand 4WD Components for 1997 Ford F-350 Pickups

Select from 4 premium 4WD Components parts for your 1997 Ford F-350 Pickup, with prices ranging from $32.99 to $428.99.

Milemarker – MileMarker Supreme; Manual Hub (Part No.449S/S)

MileMarker Supreme; Manual Hub

from

$428.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

Product Features:
  • Ultimate In Style And Service
  • Latest Patented Technology
  • Smooth Operation
  • Limited Lifetime Warranty
See More

Carquest Premium – 4WD Switch (Part No.FWC1015)

4WD Switch

from

$63.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Milemarker – MileMarker Supreme; Manual Hub (Part No.459S/S)

MileMarker Supreme; Manual Hub

from

$313.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

Product Features:
  • Ultimate In Style And Service
  • Latest Patented Technology
  • Smooth Operation
  • Limited Lifetime Warranty
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1843)

4WD Control Switch Connector

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Most Sold 1997 Ford F-350 Pickup Drive Shafts and Axles

Explore our best-selling Ford parts for the 1997 F-350 Pickup among 70 OEM and aftermarket options starting from $3.93.

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.710492)

Multi Purpose Seal

from

$49.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.SPL55-3X)

Universal Joint

from

$81.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

National – Multi Purpose Bearing (Part No.HB-88508-AA)

Multi Purpose Bearing

from

$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)

Drive Shaft Center Support

from

$29.49
Drive Shaft Center Support

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Axle O-Ring Kit (Part No.926-163)

Rear Axle O-Ring Kit

from

$16.29
The axle shaft o-ring seals the rear axle to the wheel hub. The symptom of a failed axle shaft o-ring is an axle fluid leak around wheel hub. This is an ideal repair solution to prevent axle fluid leaks from forming around the wheel hub.

Product Features:
  • Aftermarket exclusive replacement part.
  • Recommended for replacement when servicing vehicle brakes.
  • Direct replacement for original equipment
  • This part has undergone extensive vehicle try-on and durability testing to ensure strength, fitment and longevity
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Axle Shaft Seal (Part No.S-710492)

Axle Shaft Seal

from

$39.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Front Spindle For Dana 60, 92-98 Ford F350 (Part No.32267)

Replacement Front Spindle For Dana 60, 92-98 Ford F350

from

$375.99
Replacement front spindle for Dana 60, 92-98 Ford F350, 5 holes, 7″ long, 7″ flange.

Product Features:
  • Fits 1992-1998 Ford F350 with reverse rotation Dana Spicer 60 front
  • 7.00″ tall
  • 7.00″ flange
  • 5 bolt holes
See More

SKF – Driveshaft Support with Bearing (Part No.K1030325692SKF)

Driveshaft Support with Bearing

from

$61.90
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • OE Quality, fit and performance
  • Precise driveshaft alignment and support
  • Pre-lubricated and sealed
  • Metal reinforced seals to prevent contamination
  • Manufactured from durable rubber compounds
See More

Dorman – Spindle Nut (Part No.K1002831650DOR)

Spindle Nut

from

$17.26
Spindle Nut

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

Pinion Yoke Dust Shield For Dana 60 & 70

from

$7.99
Product Features:
  • Pinion yoke dust shield
  • Fits Dana Spicer 60 and 70
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Replacement Yoke For Dana 80 With A 1410 U/Joint Size (Part No.41034)

Replacement Yoke For Dana 80 With A 1410 U/Joint Size

from

$334.99
Yukon replacement yoke for Dana 80 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 80
  • 37 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

SKF – Driveshaft Support (Part No.K10301069521SKF)

Driveshaft Support

from

$89.23
Driveshaft Support

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-942)

Rear Drive Shaft: Greaseable, Adjustable

from

$1284.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-219)

Rear Drive Shaft: Greaseable, Adjustable

from

$1282.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Driveshaft Assembly (Part No.938-354)

Front Driveshaft Assembly

from

$1189.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-336)

Rear Drive Shaft: Greaseable, Adjustable

from

$1138.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-690)

Rear Drive Shaft: Greaseable, Adjustable

from

$1075.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-312)

Front Drive Shaft: Greaseable, Adjustable

from

$1056.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-756)

Rear Drive Shaft: Greaseable, Adjustable

from

$1049.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-586)

Rear Drive Shaft: Greaseable, Adjustable

from

$1033.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-700)

Rear Drive Shaft: Greaseable, Adjustable

from

$1003.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-193)

Rear Drive Shaft: Greaseable, Adjustable

from

$997.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-694)

Rear Drive Shaft: Greaseable, Adjustable

from

$989.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-248)

Front Drive Shaft: Greaseable, Adjustable

from

$941.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-745)

Rear Drive Shaft: Greaseable, Adjustable

from

$847.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-409)

Rear Drive Shaft: Greaseable, Adjustable

from

$836.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-091)

Rear Drive Shaft: Greaseable, Adjustable

from

$803.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-947)

Rear Drive Shaft: Adjustable

from

$761.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – 1541H Replacement Outer Stub Axle Shaft For ’88-’99 Dana 60 (Part No.21102)

1541H Replacement Outer Stub Axle Shaft For '88-'99 Dana 60

from

$284.99
Yukon 1541H replacement outer stub axle shaft for ’88-’99 Dana 60 with a length of 11.4 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:
  • 30 spline
  • 11.4″ long
  • Fits Dana Spicer 60 in 1988-1999 Ford F350
  • Outer stub
  • 5-332X U-joint size
See More

Yukon Gear – Ford 10.25" Rear Axle Bearing And Seal Kit (Part No.10034)

Ford 10.25" Rear Axle Bearing And Seal Kit

from

$274.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for 10.25″ Ford (full-floating). This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford 10.25″
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

Yukon Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 60, ’88-’99 Ford F350 (Part No.21415)

4340 Chrome-Moly Replacement Outer Stub For Dana 60, '88-'99 Ford F350

from

$256.99
Yukon 4340 Chrome-Moly replacement outer stub for Dana 60, ’88-’99 Ford F350 with a length of 11.4″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits 1988-1999 Ford F350
  • 4340 Chromoly
  • Outer stub
  • 30 spline
  • 11.4″ from end of splines to center of u-joint bore
See More

Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)

Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size

from

$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41027)

Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size

from

$219.99
Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41026)

Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size

from

$179.99
Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Top-Rated Drivetrains Brands For Your 1997 Ford F-350 Pickup

Shop for the best-rated brands offering Drivetrains and other products for your 1997 Ford F-350 Pickups. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1997 F-350 Pickup start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1997 Ford F-350 Pickup Drivetrains

When it comes to maintaining or upgrading your 1997 Ford F-350 Pickup, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1997 Ford F-350 Pickup. With over 3 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $21.82. Plus, with over 55 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Transfer Case Fluid, 1 Quart
from
$14.99

(36)

Transfer Case Fluid, 1 Quart

“Did not have to use a lot”

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

DEX/MERC Automatic Transmission Fluid, 1 Gallon
from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

Popular Moog 1997 Ford F-350 Pickup Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1997 Ford F-350 Pickup owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1997 F-350 Pickup, Advance Auto Parts carries a full inventory of 15 Moog Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Moog Drivetrains range from $9.99 to $105.99, plus, with more than 337 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Greaseable Super Strength Universal Joint
from
$30.99
This product is not rated

Greaseable Super Strength Universal Joint

“”

Double Cardan CV Centering Yoke
from
$105.99
This product is not rated

Double Cardan CV Centering Yoke

“”

Non-Greaseable Super Strength Universal Joint
from
$73.99
This product is not rated

Non-Greaseable Super Strength Universal Joint

“”

FAQs for 1997 Ford F-350 Pickup Drivetrains

Which Drivetrains are best-sellers for 1997 Ford F-350 Pickups?

Out of 638 Drivetrains that fit 1997 Ford F-350 Pickups, the following parts are the top sellers:

What’s the price range for 1997 Ford F-350 Pickup Drivetrains?

Drivetrain prices for the 1997 Ford F-350 Pickup start at $2.59 and go up to $2,784.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1997 Ford F-350 Pickup?

The average price for Drivetrains for the 1997 Ford F-350 Pickup is $314.47. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford F-350 Pickup model years?

Yes, we currently carry Drivetrains for 41 model years of Ford F-350 Pickups between 1953 and 1996. Drivetrains are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Drivetrains for my 1997 Ford F-350 Pickup?

The cheapest 1997 Ford F-350 Pickup Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 1997 Ford F-350 Pickup?

Out of 2,044 reviews by customers, our 1997 Ford F-350 Pickup Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1997 Ford F-350 Pickup and their top-rated products:

What types of Drivetrains do you sell for my 1997 Ford F-350 Pickup?

Can I get help with 1997 Ford F-350 Pickup Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford F-350 Pickup Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford F-350 Pickup Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.