1986 Ford F-250 Pickup Ball Joints
More 1986 Ford F-250 Pickup Ball Joints
Find your specific 1986 Ford F-250 Pickup original or aftermarket Ball Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1986 Ford F-250 Pickup Ball Joints
TRW – Ball Joint (Part No.L20201100481TRW)
from
$101.76
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
Motorcraft – Ball Joint (Part No.L2020335084MTR)
from
$84.57
Motorcraft ball joints feature wrench flats, when feasible, to aid in installation and include new pinch bolt, nut and other necessary parts for attachment. Ball joint-only cartridges to eliminate the unnecessary replacement of entire control arm assemblies.
Product Features:
See More
Product Features:
- Hardened metal stud – Heat-treated for excellent strength and durability, feature the use of castle nuts and cotter pins
- Full ball design – Allows smooth motion to maintain precise alignment and improved handling
- Polymer bearing design – Where applicable, encapsulates the ball stud and eliminates heavy preload to reduce steering effort and minimize wear
- Grease fittings – Where applicable, allow lubrication for future maintenance
- Magnesium phosphate coating – Provides a rust-preventative finish to extend shelf life
- Oversized housing – Provides a better fit for vehicles with slightly worn control arms
- Sealed boots – Feature steel retaining rings, where applicable, to protect joints from contaminants and water
- Directional grease escapements – Allow old grease to be flushed out during maintenance
Driveworks – Suspension Ball Joint (Part No.DW-K80014)
from
$48.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Rare Parts – Ball Joint (Part No.RP10514)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Carquest Premium – Ball Joint (Part No.410-65220)
from
$55.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Knurling improves retention between the control arm/knuckle and ball joint housing
- Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
ACDelco – Advantage Suspension Ball Joint Assembly (Part No.L2020579128ACD)
from
$27.82
ACDelco Advantage Suspension Ball Joints connect your vehicle’s control arm to its steering knuckle, allowing your wheels to turn and the suspension to move. They serve as the pivot between the wheels and suspension, as well as a support for your vehicle’s weight. These replacement components contain a forged CNC-machined shell, synthetic bearings, and full-ball studs, for high-quality performance and durability. ACDelco Advantage Chassis products provide high-quality parts at a tremendous value. Engineered to the fit, form, and function of a premium aftermarket line, ACDelco Advantage Chassis include tie rod ends, ball joints, control arms, steering and suspension links, steering arms, and bushings – all at an economical price. With ACDelco Advantage parts, installation hardware is included where needed.
Product Features:
See More
Product Features:
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- Heat-treated for enhanced quality and endurance
- Greasable design where applicable, for easy maintenance and longevity
- Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
Rare Parts – Ball Joint (Part No.RP11113)
from
$29.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
ACDelco – Professional Ball Joint (Part No.L2020579127ACD)
from
$72.70
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.
Product Features:
See More
Product Features:
- Superb strength and durability thanks to precision manufactured housing and components
- Advanced corrosion protection against the harshest conditions
- Permanently attached boot reduces contamination, makes installation easier
- Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
- No spring means no end play, easier installation
- One-piece forged housing for easier steering
Carquest Premium – Ball Joint (Part No.410-95584)
from
$50.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Knurling improves retention between the control arm/knuckle and ball joint housing
- Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
Rare Parts – Ball Joint (Part No.RP12741)
from
$52.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Ball Joint (Part No.K8695T006)
from
$77.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
TRW – Ball Joint (Part No.L2020216936TRW)
from
$61.50
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
MOOG – Ball Joint (Part No.K8695T)
from
$60.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Moog – Ball Joint (Part No.L20201172172MOG)
from
$51.37
Ball Joint
Driveworks – Suspension Ball Joint (Part No.DW-K80026HD)
from
$19.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Driveworks – Ball Joint (Part No.DW-K8695T006)
from
$29.99
Ball Joint
Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)
from
$157.99
Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.
Product Features:
See More
Product Features:
- Ball joint kit for Dana Spicer 30 and 44
- Complete kit for upper and lower
- Services one side
- Replaces Spicer part number 706116X
Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K8194T)
from
$50.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
MOOG – Ball Joint (Part No.K8435)
from
$83.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – Ball Joint Kit For ’99 & Down Ford & Dodge Dana 60, One Side (Part No.33456)
from
$213.99
Ball Joint kit for ’99 & down Ford & Dodge Dana 60, one side. This replaces Spicer part number 707469X.
Product Features:
See More
Product Features:
- Ball joint kit for 1999 and down Ford and Dodge Dana 60
- Complete kit for upper and lower
- Services one side
- Replaces Spicer part number 707469X
MOOG – Ball Joint (Part No.K80027)
from
$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Ball Joint (Part No.DW-K8435)
from
$18.79
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Driveworks – Ball Joint (Part No.DW-K8433)
from
$23.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
MOOG – Ball Joint (Part No.K80026)
from
$68.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Driveworks – Suspension Ball Joint (Part No.DW-K8194THD)
from
$22.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More
MOOG – Ball Joint (Part No.K8194T)
from
$68.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Driveworks – Ball Joint (Part No.DW-K80027)
from
$39.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Driveworks – Ball Joint (Part No.DW-K8695T)
from
$42.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Popular 1986 Ford F-250 Pickup Ball Joints Categories
1986 Ford F-250 Pickup Ball Joints
Maybe you’re in the middle of a full rebuild of that 1986 Ford F-250 Pickup. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 15 different Ball Joints in our inventory ranging from $17.79 to $101.76. That means you can find the exact parts or products you need to keep that 1986 Ford F-250 Pickup running smoothly.
Ball Joints are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Ford F-250 Pickup. Moog, Driveworks, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ball Joints for your 1986 Ford F-250 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 445 reviews in this category, some of the top rated parts include Suspension Ball Joint with 3.8 stars and Suspension Ball Joint with 3.7 stars.
So if you’re in the market for aftermarket Ball Joints to keep your 1986 Ford F-250 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ball Joints Brands To Make Your 1986 Ford F-250 Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Ford F-250 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Pickup the best it can be. Be sure to browse some of our top Ball Joints brands and parts.
Popular MOOG Ball Joints
We carry MOOG parts in our stock across Suspension Ball Joint Kits categories, plus more. For a 1986 Ford F-250 Pickup, our most popular MOOG Ball Joints include:
FAQs for 1986 Ford F-250 Pickup Ball Joints
What are the most purchased Ball Joints for the 1986 Ford F-250 Pickup?
Out of 15 Ball Joints for the 1986 Ford F-250 Pickup, the most popular in our inventory are:
What are the top-rated 1986 Ford F-250 Pickup Ball Joints?
Top-rated Ball Joints for your 1986 Ford F-250 Pickup based on customer reviews/ratings are:
from
$17.79
(4)
Suspension Ball Joint
“Quality looks good, price was fair, most importantly it was available when I needed it. Love that they still stock parts for my 70s and 80s vehicles.”
from
$19.99
(3)
Suspension Ball Joint
“Great price and it worked just fine. A big plus is that it has a grease fitting.”
