1986 BMW 528E Filters and PCVs
More 1986 BMW 528E Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 1986 BMW 528E, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 1986 BMW 528E Filters and PCVs
Pro-King – Automatic Transmission Filter Kit (Part No.FK-285)
from
$14.89
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More
Carquest Premium – Full-Flow Lube Spin-on (Part No.85374HD)
from
$14.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
ATP – AUTO TRANS FLTR KT (Part No.IL-150)
from
$40.99
AUTO TRANS FLTR KT
Pro-King – Automatic Transmission Filter Kit (Part No.FK-156)
from
$16.49
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More
Carquest Premium – Air Filter (Part No.88221)
from
$13.99
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
aFe POWER – PRO 5R Air Filter: 98.6% Filtration Efficiency, 5 Layer Cotton, Oiled Filter, Track/Street Driving (Part No.30-10047)
from
$68.99
Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Product Features:
See More
Product Features:
- High Flow For Increased Performance
- Progressive 5 Layer Cotton Gauze Material
- Deep Cotton Pleats for Increased Flow
- Progressive Bump Seal For Leak-Free Seal
Purolator ONE – Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal (Part No.A43558)
from
$15.79
Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE┐ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier
See More
Carquest Premium – Air Filter (Part No.88135)
from
$21.49
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85088)
from
$12.49
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 miles (Part No.R85088)
from
$6.29
Carquest standard filters are built to meet OE specifications for fit, form, and function
Product Features:
See More
Product Features:
- Meets all new car warranty requirements
- Precision bypass valve insures optimal oil flow
- Cellulose fiber media for reliable engine protection
- Nitrile ant-drain back valve for engine start-up protection
- Internally lubricated nitrile seal gasket
- Metal end caps and leaf spring maintain structural integrity
- Engineered for use with conventional oil
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2009)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Carquest Premium – Full-Flow Lube Spin-on (Part No.85342HD)
from
$12.79
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.PS-2005)
from
$8.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Carquest Premium – 8mm Inlet-Outlet Metal In-Line Fuel Filter (Part No.86179)
from
$36.99
CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.
Product Features:
See More
Product Features:
- Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
- Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
- Provides maximum fuel system protection.
- Designed to meet or exceed Original Equipment specifications
- Protects the injectors from debris that cause damage and clogging.
- Provides less restriction preventing the fuel pump from working too hard.
- Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.
ACDelco – Fuel Filter (Part No.GF538)
from
$46.49
ACDelco Gold (Professional) Fuel Filters are a high quality alternative to Original Equipment (OE) parts. These fuel filters are located in the fuel line of your vehicle and help prevent fuel contaminants, such as dirt and rust particles, from entering the fuel delivery system to help keep the engine running properly. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Help prevent dirt, rust, and other fuel contaminants from entering the fuel delivery system
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Purolator – Fuel Filter (Part No.F60146)
from
$35.99
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Beck/Arnley – Fuel Filter (Part No.043-0805)
from
$29.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with top grade pleated or rolled materials
- Designed to work with the OE bracket on vehicle if applicable
- Quality construction for durability
- Application specific for this vehicle
Vaico – AT Filter Kit (Part No.J501018616VCO)
from
$29.26
AT Filter Kit
ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)
from
$42.99
AT IN-LINE FLTR 5/16
Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.95165)
from
$20.29
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.
Product Features:
See More
Product Features:
- Guaranteed OE quality form, fit and function
- Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
- Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
Dorman – Oil Drain Plug Standard M22-1.50, Head Size 19mm (Part No.65223)
from
$8.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Standard Engine Oil Drain Plug: M12-1.50 Thread, 15 mm Head, 1 Pack (Part No.69014)
from
$3.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Accufit – Oil Drain Plug, M12 x 1.5 (Part No.ODP-00010B)
from
$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.
Product Features:
See More
Product Features:
- Easy Install – Finger-grip wing for ease of installation
- All plugs have 14mm hex – just one wrench works for all
- Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
Febi – Oil Drain Plug (Part No.A611014718FEB)
from
$2.89
Oil Drain Plug
Dorman – Standard Engine Oil Drain Plug: M22-1.50 Thread, 19 mm Head (Sold by each) (Part No.090-055)
from
$10.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Oil Drain Plug Standard M12-1.50, Head Size 17Mm (Part No.090-088CD)
from
$4.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Popular 1986 BMW 528E Filters and PCVs Categories
1986 BMW 528E Filters and PCVs
You count on your 1986 BMW 528E to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 23 Filters and PCVs ranging in price from $2.89 to $68.99, you’re sure to find everything you need for your 1986 BMW 528E.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 13 different brands like K&N, Carquest Premium, and ATP. 1986 BMW 528E Filters and PCVs start as low as $2.89!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 55 extensive product reviews on 1986 BMW 528E Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are Fuel Filter with 5.0 stars and Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal with 5.0 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1986 BMW 528E below to get started!
Top-Rated Filters and PCVs Brands For Your 1986 BMW 528E
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 BMW 528E running right for years to come. In our inventory you’ll find brands like K&N, Carquest Premium, ATP, and even more.
Popular Carquest Standard Filters and PCVs
You’ll find popular Carquest Standard brand products across Oil Filters. All are waiting to get your 1986 BMW 528E back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated K&N Filters and PCVs
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Filters and PCVs for your 1986 BMW 528E, and some of our most reviewed K&N parts include:
from
$17.99
(42)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
from
$8.99
(1)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
FAQs for 1986 BMW 528E Filters and PCVs
What are the most purchased Filters and PCVs for the 1986 BMW 528E?
Out of 23 Filters and PCVs for the 1986 BMW 528E, the most popular in our inventory are:
What are the top-rated 1986 BMW 528E Filters and PCVs?
Top-rated Filters and PCVs for your 1986 BMW 528E based on customer reviews/ratings are:
from
$35.99
(7)
Fuel Filter
“The filter fit into my brother’s 1998 VW Jetta with over 220k miles on it, and was able to improve his gas mileage greatly during a cross country trip”
from
$15.79
(1)
Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal
“as expected from Purolator”
from
$12.49
(1)
Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles
“Great product. Confident that this product will hold up.”
