1985 Honda Prelude Transmission Parts
More 1985 Honda Prelude Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1985 Honda Prelude, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1985 Honda Prelude Transmission Parts
National – Multi Purpose Seal (Part No.221207)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Arai Seisakusho – Shift Rod Seal (Part No.J116232074ARS)
from
$6.60
Shift Rod Seal
Pro-King – Manual Transmission Rebuild Kit, Excludes Syncros (Part No.BK252)
from
$209.99
The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.
See More
National – Multi Purpose Seal (Part No.710314)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
NOK – Converter Housing Seal (Part No.J5076177570NOK)
from
$8.66
Converter Housing Seal
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-15)
from
$10.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-15)
from
$18.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Back Up Light Switch (Part No.SBA4522)
from
$30.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Multi Purpose Seal (Part No.3459)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.712009)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99049)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Pro-King – Manual Transmission Rebuild Kit, Includes Syncros (Part No.BK186WS)
from
$194.99
The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.
See More
Pro-King – Manual Transmission Rebuild Kit, Includes Syncros (Part No.BK252WS)
from
$264.99
The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.
See More
Anchor – Engine Mount: Left, 1 Piece (Part No.8031)
from
$22.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 79-87;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1979-1987
- Weight approx: 1 Lbs
- INSERT ONLY
Anchor – Transmission Mount: Right, 1 Piece (Part No.8347)
from
$50.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to ACURA 97-99; HONDA 95-98; ISUZU 96-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1995-1999
- Weight approx: 3 Lbs
Dorman – Engine Oil Drain Plug (Part No.A61101317565DOR)
from
$3.84
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
- Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
- Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
NOK – Drive Axle Seal (Part No.J704334154NOK)
from
$9.78
Drive Axle Seal
National – Multi Purpose Seal (Part No.223543)
from
$5.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-350609)
from
$6.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.350609)
from
$16.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
SKF – AT Output Shaft Seal (Part No.J2557368289SKF)
from
$11.90
AT Output Shaft Seal
Corteco – Drive Axle Seal (Part No.J704340773CFW)
from
$10.97
Drive Axle Seal
Permatex – Ultra Grey RTV Silicone Gasket Maker, 3 OZ (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool® plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Popular 1985 Honda Prelude Transmission Parts Categories
1985 Honda Prelude Transmission Parts
You count on your 1985 Honda Prelude to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 36 Transmission Parts ranging in price from $3.79 to $264.99, you’re sure to find everything you need for your 1985 Honda Prelude.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 11 different brands like Imperial, Permatex, and National. 1985 Honda Prelude Transmission Parts start as low as $3.79!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 498 extensive product reviews on 1985 Honda Prelude Transmission Parts. Some of the top-rated Transmission Parts products we carry are Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars and Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1985 Honda Prelude below to get started!
Top-Rated Transmission Parts Brands For Your 1985 Honda Prelude
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Honda Prelude running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, National, and even more.
Popular Permatex Transmission Parts
You’ll find popular Permatex brand products across Automatic Transmission Pan and Gaskets. All are waiting to get your 1985 Honda Prelude back on the road. Some of the top-rated Permatex products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1985 Honda Prelude, and some of our most reviewed Imperial parts include:
FAQs for 1985 Honda Prelude Transmission Parts
What are the most purchased Transmission Parts for the 1985 Honda Prelude?
Out of 36 Transmission Parts for the 1985 Honda Prelude, the most popular in our inventory are:
What are the top-rated 1985 Honda Prelude Transmission Parts?
Top-rated Transmission Parts for your 1985 Honda Prelude based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
from
$52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
