1985 GMC Safari Performance and Racing Products

Essential 1985 GMC Safari Performance and Racing Products

Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

from

$27.99
Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

Product Features:
  • 1.28″x2.10″
  • Stock Port Style
  • .060″ Thick
  • Multi Piece Configuration
  • Composite Material
See More

B & M – ShiftPlus, 4L60E and 4L80E (Part No.70380)

ShiftPlus, 4L60E and 4L80E

from

$90.99
The B&M Shift Plus, recalibrates your transmission’s hydraulic system electronically which firms up the shifts and reduces heat and slippage. A simple flip of the switch allows you to choose which shift firmness setting you want to run.

Product Features:
  • Installs In Minutes
  • Reduces Slippage and Heat
  • 50 State Emissions Legal
  • Recalibrates Hydraulic System
  • Recalibrates Electronically
  • Fun and Pleasurable Drive
  • Extends Transmission Life
  • Simple Flip Of Switch
See More

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

    Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8

    from

    $154.99
    As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

    Product Features:
    • NHRA/IHRA Legal For All Classes
    • Includes SFI Certification Sticker
    • Ideal For Street Applications
    • To Extreme Duty Racing
    • To High RPM Use
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Edelbrock – Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold (Part No.3713)

    Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

    from

    $566.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Computer Chip Available – Return Card in Packaging
    • Accepts All Factory Accessories
    • Not for Vehicles with Flash Memory Computer
    • Gains 6/10s of a Second in 10 to 70 MPH
    • Stock Throttle Body Remains in Stock Position
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.6091)

    Intake Manifold Bolts

    from

    $32.09
    These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

    Product Features:
    • Features 12-point Smaller-than-standard Bolt Head
    • Thick Flat Washers Distribute Optimum Clamp Load
    • Ideal Use Where Space Is Minimal On Race Manifolds
    • Bolts And Washers Zinc Plated For Protection
    • Zinc Plated For Protection
    See More

    MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

    Coil; GM External HEI Coil; High Performance

    from

    $71.99
    Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

    Product Features:
    • Direct performance replacement for GM dual connector coil
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    See More

    Spectre – GM Differential Cover Camaro/S-10 (Part No.6074)

    GM Differential Cover Camaro/S-10

    from

    $47.99
    Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and includes a gasket, this differential cover is designed to fit 1978 and up Chevy/GM intermediates, 1982 and up Chevy Camaro/Pontiac Firebird, 1993-2002 Chevy Camaro/Pontiac Firebird V6, 1982-2003 Chevy S10/S15/Envoy, 1985-1998 Chevy Astro/GMC Safari, and 1998-2003 Isuzu differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

    Product Features:
    • 10 bolt design cover
    • Includes gasket
    • Triple chrome plated for a lasting shine
    • 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
    See More

    B & M – Holeshot 2400 (Part No.70441)

    Holeshot 2400

    from

    $709.99
    Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

    Exhaust Manifold Gasket Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1002)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $68.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

    PERFORMANCE REAR MAIN SEAL SET

    from

    $36.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – A/Tdipstick (Part No.9704G)

    A/Tdipstick

    from

    $79.99
    Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

    Product Features:
    • Braided Stainless Steel
    • Firewall Mounting
    • Includes Oil Fill Tube
    See More

    Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

    Oil Pan Bolt Kit

    from

    $17.49
    The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

    Product Features:
    • Ideal For Tight Spaces
    • Serrations Prevent Loosening
    • Flange Distributes Pressure
    • Zinc Plated Bolts
    • Grade 5 Material
    • Easy Installation
    See More

    B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

    Automatic Shifter, Light Truck Megashifter

    from

    $479.99
    The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

    Product Features:
    • Universal Floor Mount Application
    • Cable Operated
    • Quick Installation
    • Accurate Shifting
    • NHRA/IHRA Reverse Lockout Meets Requirements
    • Use w/Reverse Pattern Valve Body
    • Includes Neutral Safety Switch
    • Includes Backup Light Switch
    See More

    Russell – Street Legal, Astro/Safari 2WD (Part No.672320)

    Street Legal, Astro/Safari 2WD

    from

    $59.99
    Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Accel – Cap/Rotor (Part No.8129)

    Cap/Rotor

    from

    $60.99
    ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

    Product Features:
    • See catalog for application information
    • Features 60K V Rated Alkyd Compound
    See More

    Accel – Distributor Cap And Rotor Kit (Part No.8133)

    Distributor Cap And Rotor Kit

    from

    $42.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G875323)

    Performance Differential Ring and Pinion

    from

    $237.99


    Product Features:
    • GM 10BL 7.5 &7.625 R/P 3.23 MGP 10 3/8 X 18 LH THRED BLTS, PD=1.438
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G875410X)

    Performance Differential Ring and Pinion

    from

    $236.99


    Product Features:
    • GM 10BL 7.5 &7.625 R/P 4.10X* MGP THICK
    See More

    Richmond Gear – RngPnn (Part No.GM75342OE)

    RngPnn

    from

    $191.99
    RngPnn

    Weiand – Action Plus Water Pumps (Part No.9240P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    1985 GMC Safari Performance and Racing Products

    You count on your 1985 GMC Safari to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 46 Performance and Racing Products ranging in price from $17.49 to $789.99, you’re sure to find everything you need for your 1985 GMC Safari.

    Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 13 different brands like K&N, Accel, and MSD Ignition. 1985 GMC Safari Performance and Racing Products start as low as $17.49!

    One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 159 extensive product reviews on 1985 GMC Safari Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are High Energy Ignition Coil for GM HEI – 1973-1991 with 5.0 stars and Intake Manifold Bolts with 4.6 stars.

    Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1985 GMC Safari below to get started!

    Top-Rated Performance and Racing Products Brands For Your 1985 GMC Safari

    Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 GMC Safari running right for years to come. In our inventory you’ll find brands like K&N, Accel, MSD Ignition, and even more.

    Popular K&N Performance and Racing Products

    You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1985 GMC Safari back on the road. Some of the top-rated K&N products in these categories are:

    FAQs for 1985 GMC Safari Performance and Racing Products

    What are the most purchased Performance and Racing Products for the 1985 GMC Safari?

    Out of 46 Performance and Racing Products for the 1985 GMC Safari, the most popular in our inventory are:
    Coil; GM External HEI Coil; High Performance
    from $71.99
    (3)
    Coil; GM External HEI Coil; High Performance
    Performance Coils
    Oil Pan Bolt Kit
    from $17.49
    This product is not rated
    Oil Pan Bolt Kit
    Performance Oil Pans
    GM 1984-95 Remote Supercoil
    from $79.99
    (15)
    GM 1984-95 Remote Supercoil
    Performance Coils

    What are the top-rated 1985 GMC Safari Performance and Racing Products?

    Top-rated Performance and Racing Products for your 1985 GMC Safari based on customer reviews/ratings are:
    High Energy Ignition Coil for GM HEI - 1973-1991
    from $100.99
    (8)
    High Energy Ignition Coil for GM HEI – 1973-1991
    “GREAT ITEM WORKS WELL”
    Intake Manifold Bolts
    from $32.09
    (5)
    Intake Manifold Bolts
    “Excellent product.”
    Unilite Ignition Module
    from $85.29
    (3)
    Unilite Ignition Module
    “I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”