1985 GMC Safari Performance and Racing Products
Find Your Specific 1985 GMC Safari Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1985 Safari. Advance Auto Parts has popular Safari parts like Performance Fuel Systems, Performance Ignition Products, Performance Transmissions and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Safari model years including
1994,
1995,
1996,
1997,
1998,
1999,
2003,
2004,
2005 and more. Select a category of 1985 GMC Safari Performance and Racing Products below and start saving instantly.
Popular 1985 GMC Safari Performance and Racing Products Categories
Essential Performance and Racing Products for 1985 GMC Safaris
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Richmond Gear – MiniSpool (Part No.78-7526-1)
from
$124.99
MiniSpool
Mr. Gasket – A/Tdipstick (Part No.9704G)
from
$91.99
Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.
Product Features:
See More
Product Features:
- Braided Stainless Steel
- Firewall Mounting
- Includes Oil Fill Tube
Weiand – Action Plus Water Pumps (Part No.9208P)
from
$255.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.
Product Features:
See More
Product Features:
- Twisted Snout Water Pump Design For Updated Style
- Street Performance
- Heavy Duty Shaft w/5/8 in. Pilot
- Six-Blade Stamped Steel
- Anti-Cavitation Impeller
- 100 Percent Leak Tested
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1202)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Motive Gear – Differential Ring and Pinion (Part No.GM7.2-456IFS)
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$10.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)
from
$539.99
The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)
from
$20.79
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Energy Suspension – Motor Mount (Part No.3.1145R)
from
$66.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2912)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longevity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)
from
$37.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Edelbrock – Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L) (Part No.2111)
from
$376.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Produces at Least 18 More Horsepower
- Best Matched with Edelbrock 500cfm Carburetor
Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)
from
$170.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)
from
$173.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)
from
$85.99
When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement coil for GM 1996-1999
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$79.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Upgrade your 1985 GMC Safari with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1985 GMC Safari, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Safari functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Performance and Racing Products for the 1985 GMC Safari, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 GMC Safari at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $9.99 to $921.99, with
an average price of $291.19.
Our 61 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1985 GMC Safari without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 GMC Safari, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Holley, B & M, Accel, and more.
Holley Performance and Racing Products
start at just $509.99 and boast an impressive 4.2 stars average rating from customers.
B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $88.99, and at an average 4.1 stars rating.
With 184 customer reviews and counting, our 1985 GMC Safari Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 GMC Safari is always ready to roll. We’re committed to providing you with everything you need to keep your Safari in top shape, all in one place.
Start shopping confidently below for your 1985 GMC Safari!
Best-Selling Performance Fuel Systems for 1985 GMC Safaris
Enhance the driving experience in your GMC with 4 quality Performance Fuel System components, starting at $509.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Most Popular 1985 GMC Safari Performance Ignition Products
Customize your GMC with 7 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $204.99.
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$102.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$79.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$88.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1985 GMC Safari Performance Transmissions
Upgrade GMC Safaris with top-quality Performance Transmissions parts, including 2 OEM and aftermarket selections for your 1985 model.
Mr. Gasket – A/Tdipstick (Part No.9704G)
from
$91.99
Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.
Product Features:
See More
Product Features:
- Braided Stainless Steel
- Firewall Mounting
- Includes Oil Fill Tube
Energy Suspension – Motor Mount (Part No.3.1145R)
from
$66.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
In-Demand Performance Engines for 1985 GMC Safaris
Select from 17 premium Performance Engines parts for your 1985 GMC Safari, with prices ranging from $9.99 to $921.99.
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Weiand – Action Plus Water Pumps (Part No.9208P)
from
$255.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.
Product Features:
See More
Product Features:
- Twisted Snout Water Pump Design For Updated Style
- Street Performance
- Heavy Duty Shaft w/5/8 in. Pilot
- Six-Blade Stamped Steel
- Anti-Cavitation Impeller
- 100 Percent Leak Tested
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$10.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
Edelbrock – Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L) (Part No.2111)
from
$376.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Produces at Least 18 More Horsepower
- Best Matched with Edelbrock 500cfm Carburetor
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – XE 206/206 HFT4.3 (Part No.18-119-4)
from
$312.99
XE 206/206 HFT4.3
Competition Cams – XE 212/212 HFT4.3 (Part No.18-123-4)
from
$312.99
XE 212/212 HFT4.3
Competition Cams – Engine Valve Spring Kit (Part No.980-12)
from
$57.99
Engine Valve Spring Kit
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)
from
$50.99
ENGINE ROCKER ARM
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2912)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longevity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1202)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Competition Cams – Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (Part No.2900-1)
from
$15.99
Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac
Competition Cams – Engine Valve Spring (Part No.980-1)
from
$9.99
Engine Valve Spring
Most Sold 1985 GMC Safari Performance Exhaust Products
Explore our best-selling GMC parts for the 1985 Safari among 1 OEM and aftermarket options starting from $28.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top-Rated Performance and Racing Products Brands For Your 1985 GMC Safari
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 GMC Safaris. Below you’ll find some of our best rated Performance and Racing Products from Holley, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1985 Safari start at just $88.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Holley 1985 GMC Safari Performance and Racing Products
When it comes to maintaining or upgrading your 1985 GMC Safari, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Holley ticks all of those boxes. We offer a wide selection of Holley Performance and Racing Products, specifically designed for the 1985 GMC Safari. With over 3 Holley brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $509.99, with an average price of just $642.32. Plus, with over 53 customer reviews and an average rating of 4.2 stars, you can trust that our Holley Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
Popular B & M 1985 GMC Safari Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 GMC Safari owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1985 Safari, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$371.99
(1)
Automatic Shifter, Sport Shifter
“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and
a knock out to drive.No down falls as far as I’m aw”
from
$349.99
(1)
Automatic Shifter, StarShifter
“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”
from
$539.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
FAQs for 1985 GMC Safari Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1985 GMC Safaris?
Out of 61 Performance and Racing Products that fit 1985 GMC Safaris, the following parts are the top sellers:
- Intake Manifold Bolts (6120970) – $18.29
- Coil; GM External HEI Coil; High Performance (17350179) – $79.99
- Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (6900027) – $73.99
What’s the price range for 1985 GMC Safari Performance and Racing Products?
Performance and Racing Product prices for the 1985 GMC Safari start at $9.99 and go up to $921.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1985 GMC Safari?
The average price for Performance and Racing Products for the 1985 GMC Safari is $291.19. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC Safari model years?
What are the cheapest Performance and Racing Products for my 1985 GMC Safari?
The cheapest 1985 GMC Safari Performance and Racing Products we carry in stock are:
- Engine Valve Spring (50286657) – $9.99
- Bolt Kit Intake Hex Head (22905656) – $10.99
- Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (50287860) – $15.99
- Intake Manifold Bolts (6120970) – $18.29
- Oil Pan Bolt Kit (17360377) – $20.79
What are the top-rated Performance and Racing Products that fit the 1985 GMC Safari?
Out of 184 reviews by customers, our 1985 GMC Safari Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 GMC Safari and their top-rated products:
- Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
- Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99
What types of Performance and Racing Products do you sell for my 1985 GMC Safari?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1985 GMC Safari:
Can I get help with 1985 GMC Safari Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC Safari Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC Safari Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
