1985 Ford Mustang Engine Parts

Name: Camshaft Bearing Set
Brand: Sealed Power
SKU: 2102M
Price: 74.99 USD

Below you will find various in-demand Ford Engine Parts, components and accessories for your 1985 Mustang. Advance Auto Parts has popular Mustang parts like Camshafts, Valve Cover and Cylinder Heads, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1985 Ford Mustang Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1985 Ford Mustang Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Timing Belt Idler Pulleys

Cylinder Head Gaskets

Timing Belt Tensioners

Oil Caps

Standard Piston Sets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

O-Rings

Crankshaft Pulleys

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Cylinder Head Bolts

Oil Pump Kits

Standard Piston Rings

Standard Individual Rod Bearings

Engine Oil Pump Cover Gaskets

Expansion Plug – Pipes

Fuel Pump Gaskets

Turbocharger Mounting Gaskets

Balance Shaft Bearings

Cylinder Head Bolt Washer Sets

Engine Cylinder Head Plugs

Engine Cylinder Head Dowel Pin Sets

Engine Valve Locks

Engine Valve Seats

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Engine Timing Cover Bolt Sets

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Control Module (ECM) Bracket

Engine Timing Cover Repair Sleeve Kit

Essential Engine Parts for 1985 Ford Mustangs

from

$74.99

Speed-Pro delivers the power you need and the value & quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components.

Product Features:

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads without damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$156.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Moly-plasma top ring; surface is porous giving it great oil-carrying capacity; also forms a more effective compression seal while reducing friction and drag
Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
In the box: compression rings, rails and oil spacer

from

$159.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$60.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$23.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$9.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$187.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$37.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$5.49

This pipe plug matches the original equipment plug for diameter, thread pitch and head type to ensure a reliable repair. Made of corrosion-resistant material, it has been engineered for leak-free performance and a long service life.

Product Features:

Ideal replacement – this pipe plug matches the diameter, thread pitch and head type of the original equipment part
Durable construction – this plug is made of quality materials for dependable service
Leak-free performance – quality manufacturing process ensures a tight for reliable sealing
Quality tested – this plug has undergone validation testing to ensure proper fit and function for this vehicle’s application

from

$194.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$17.99

Anchor 2257 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1964-1973
Weight approx: 3 Lbs
Part Group: 2257, 2257
Product: Made In The Usa

from

$25.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$227.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$1.79

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

Dorman’s Engine Oil Pan Bolts are manufactured with a high corrosion resistance to combat rust in any environment. We also engineer Engine Oil Pans, sold separately.

Product Features:

Direct replacement for a proper fit every time
Available in a variety of sizes and quantities
Over-sized bolts available
High quality steel construction

from

$43.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$12.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$53.99

The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$15.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$84.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$7536.99

We specialize in building Performance Engines as Long Blocks, Mid-Dress or Turn-Key platforms with the highest quality & latest innovation parts guaranteed to meet the highest of expectations. We have spent years researching & engineering our engine packages to meet virtually every level of performance needs.

Product Features:

Engine shipped strapped on wooden pallet covered in HD cardboard
Product might not be available in all states due to local laws.

from

$175.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$626.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$350.99

These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

Product Features:

Ultimate street rocker designed for serious performance enthusiasts
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
15 to 30 horsepower increase over stock rocker arms
Use in any applications with less than 350 lbs. open spring pressure

Upgrade your 1985 Ford Mustang with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1985 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Engine Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 324 Engine Parts for the 1985 Ford Mustang, designed to meet your needs without breaking the bank. From Camshaft replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1985 Ford Mustang at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $5,877.99, with an average price of $188.97. Our 324 Engine Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 1985 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Ford Mustang, we stock popular OEM and aftermarket Engine Parts from top names like Sealed Power, National, Dorman, and more. Sealed Power Engine Parts start at just $0.43 and boast an impressive 4.3 stars average rating from customers. National and Dorman also bring quality to the table, with Engine Parts available starting at $1.29, and at an average 4.3 stars rating. With 1,424 customer reviews and counting, our 1985 Ford Mustang Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1985 Ford Mustang!

Best-Selling Camshafts for 1985 Ford Mustangs

Enhance the driving experience in your Ford with 40 quality Camshaft components, starting at $2.99.

show more show less

from

$450.99

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$12.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$9.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$43.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$2.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$33.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$340.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$24.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.29

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$645.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

Magnum Computer Control/BLower 220/224 Hydraulic Roller Cam/Lifter Kit Ford 5.0L

from

$1288.00

Magnum Computer Control/BLower 220/224 Hydraulic Roller Cam/Lifter Kit Ford 5.0L

Magnum 206/206 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L

from

$1288.00

Magnum 206/206 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L

Magnum 230/230 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L

from

$1288.00

Magnum 230/230 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L

from

$1215.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street fuel injected applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$867.99

Excellent performance in street fuel injected applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Magnum 215/215 Hydraulic Roller Cam for Ford 5.0L

from

$815.99

Magnum 215/215 Hydraulic Roller Cam for Ford 5.0L

Xtreme Energy Computer Controlled 224/230 Cam for Ford 5.0L

from

$815.99

Xtreme Energy Computer Controlled 224/230 Cam for Ford 5.0L

Xtreme Energy Computer Controlled 218/224 Cam for Ford 5.0L

from

$815.99

Xtreme Energy Computer Controlled 218/224 Cam for Ford 5.0L

XFI Computer Controlled 236/248 Hydraulic Roller Cam for Ford 351W

from

$815.99

XFI Computer Controlled 236/248 Hydraulic Roller Cam for Ford 351W

XFI Computer Controlled 248/258 Hydraulic Roller Cam for Ford 351W

from

$815.99

XFI Computer Controlled 248/258 Hydraulic Roller Cam for Ford 351W

Xtreme Energy Computer Controlled 212/218 Cam for Ford 5.0L

from

$815.99

Xtreme Energy Computer Controlled 212/218 Cam for Ford 5.0L

Magnum 206/206 Hydraulic Roller Cam for Ford 5.0L

from

$815.99

Magnum 206/206 Hydraulic Roller Cam for Ford 5.0L

Most Popular 1985 Ford Mustang Valve Cover and Cylinder Heads

Customize your Ford with 91 Valve Cover and Cylinder Heads products like Engine Valve Lifters, Cylinder Head Bolt Sets, and Cylinder Head Gaskets, all priced under $1,838.99.

show more show less

from

$35.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.49

from

$83.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$350.99

Ultimate street rocker designed for serious performance enthusiasts
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
15 to 30 horsepower increase over stock rocker arms
Use in any applications with less than 350 lbs. open spring pressure

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Manufactured for the repair environment
Unsurpassed quality you can trust
Unsurpassed quality you can trust

from

$24.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$107.99

Product Features:

Highest Quality Head Bolts
Cold-Formed/Heat Treated
Ensures Molecular Integrity
Reduced Diameter Bolt Heads
Hardened/Parallel-Ground Washers Included
Rated At 170000 psi
Manufactured By ARP

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$4.29

This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

Product Features:

Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
Corrosion resistant – withstands elements for reliable service life
Application specific – made to hold cylinder head in place on specific vehicles
Trustworthy quality – backed by team of engineers and inspectors in United States

from

$2.99

from

$26.99

PermaTorqueMLS head gaskets are built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Provides the robust seal needed to contain peak combustion pressures and temperatures
Withstands the significant casting motion encountered in many of today’s automotive engines
Validated for fit, form, and function

from

$78.99

The Edelbrock #4460 Signature Series Valve Covers are designed for Ford 260-289-302 (not Boss) and 351W V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Ford 221-351W 62-95
Tall
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$82.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 Psi Tensile Strength
High Performance Head Bolts Are Stronger

from

$66.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

from

$89.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.100 inch, Compressed thickness 0.038 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$8.99

Recommended replacement when observing wear on original pins
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust

from

$38.49

These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 10 does one cylinder head.

Product Features:

Cylinder Head Bolts
Longer-Than-Stock
High Quality Grade 8 Alloy
Increase Torque Settings
Higher Clamp Loads On Gasket

from

$8.49

from

$129.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.030 inch: Compressed thickness – .040 inch
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$120.99

High Energy Hydraulic lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and pushrod seat is maintained, eliminating excessive oiling at high engine speeds. The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance.In addition, High Energy Lifters have a lightweight check valve disc that allows for quicker response, which results in increased engine speed before valve float. This check valve disc also maintains added control at all engine speeds and loads.COMP Cams High Energy Hydraulic Lifters also contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.

Product Features:

.875″ diameter; 105g weight; 2.05″ seat height
Patented orifice metering valve precisely meters oil to the rocker arms
Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 Psi
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
1″ Adjuster Thread Length
3/8″-24 Shank Diameter and Thread
3/8″ Typical Small Block Application with Roller Rockers

from

$3.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 1985 Ford Mustang Engine Gaskets and Seals

Upgrade Ford Mustangs with top-quality Engine Gaskets and Seals parts, including 26 OEM and aftermarket selections for your 1985 model.

show more show less

from

$47.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$52.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$25.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$3.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$29.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$24.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$30.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$35.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$24.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$12.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$30.99

Available in kits including front cover gasket, crankshaft seal, fuel pump and water pump gasket or including cover gasket and front seal.

Product Features:

Timing Cover Gasket And Oil Seal Kit

from

$166.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$131.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$127.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$108.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$99.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$55.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$30.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$16.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$9.99

Product Features:

Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
Insignificant shrinkage and loss of mass even in high-heat environments
Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
Sealing gap 0.006 in (0.15 mm)

In-Demand Engine Mounts for 1985 Ford Mustangs

Select from 10 premium Engine Mounts parts for your 1985 Ford Mustang, with prices ranging from $22.99 to $302.99.

show more show less

from

$29.99

Anchor 2725 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1980-1995
Weight approx: 4 Lbs
Part Group: 2725, 2726

from

$33.99

Anchor 2726 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1980-1995
Weight approx: 4 Lbs
Part Group: 2725, 2726

from

$24.99

Anchor 2682 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1979-1992
Weight approx: 4 Lbs
Part Group: 2682, 2683

from

$23.99

Anchor 2683 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1979-1992
Weight approx: 4 Lbs
Part Group: 2682, 2683

from

$302.99

Product Features:

Designed specifically for use with stock (1984-1995 only) and Maximum Motorsports MMKM-1 (fits all 1979-1995 cars) K-members
Bolt-in compatible with Hooker BlackHeart Mustang LS swap long-tube headers (70101350-RHKR or 70101351-RHKR headers for 1979-1993 cars; 70101346-RHKR or 70101347-RHKR headers for 1994-1995 cars)
Compatible with stock or aftermarket steering shafts
Holley 302-3 LS swap oil pan required for installation

from

$281.99

Product Features:

Designed specifically for use with the AJE MU-40UM K-member
Bolt-in compatible with Hooker BlackHeart Mustang LS swap 70101350-RHKR and 70101351-RHKR headers
Requires the use of an aftermarket extended length steering shaft
Compatible with all Holley and Weiand LS swap oil pans

from

$278.99

With over 40 years of history, Nolathane remains the number 1 replacement and enhancement bushing and chassis component brand throughout Australia & New Zealand and now boasts a warehouse in California & catalog to suit the North American market.

Product Features:

Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
Supporting metal hardware with corrosion resistant coatings completes the kit for installation
Kit Contains: 3 Mounts, 1 Bracket, 2 Bolts, 4 Washers

from

$237.99

Soft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Nolathane engine mount bushings work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts.

Product Features:

Kit Contains: 2 bushings

from

$151.99

Product Features:

Permits installation of a coyote engine on a stock 1984-1995 Mustang K-member while placing the crankshaft centerline at the stock V8 engine location providing optimal U-joint angles and transmission fitment
Fabricated steel construction provides high-strength mounting solution for stock K-members
Powder coated finish provides long-term corrosion resistance
All mounting hardware included, (does not include engine mounts)
Bolt-on compatibility with Hooker BlackHeart 70103317-RHKR (1984-1993) and BH3364 (1994-1995) headers
These mounts allow enough clearance for the CMCV valve canisters between the firewall and the back of the Coyote intake manifold – on the 1996-2004 Mustang

from

$22.99

Product Features:

Can be used for aftermarket poly mounts or OEM rubber (Rubber Mounts are for GM 4th Gen F-Body)
Class 10.9 for strength
Zinc plated for corrosion resistance
Includes 2 flange head bolts and 2 flange nuts

Most Sold 1985 Ford Mustang Engine Timing Parts

Explore our best-selling Ford parts for the 1985 Mustang among 35 OEM and aftermarket options starting from $5.29.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.49

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$46.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
For Engine w/ 2-piece Fuel Pump Eccentric or EFI

from

$39.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$12.49

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This specific belt is for applications with standard temperature and load requirements with a square tooth profile

from

$51.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. 0.200″ Double Row Fixed Bushing Chain.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$42.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant. It is the fastener of choice.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
Nominally Rated At 180,000 Pounds Per Square Inch Tensile Strength To Provide You With Plenty Of Clamping Force
Made In USA
Will Not Fit 5.0L Roller Cam Applications
Sold As A Kit

from

$33.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S430T Engine Timing Camshaft Sprocket (1 EA), S431 Engine Timing Crankshaft Sprocket (1 EA), C358 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$194.99

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$25.99

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

6 3¿8″ diameter
6 3┐8″ diameter
289-302-351 cu. in.
Increased Performance
Set Valve Lash At Proper Time

from

$24.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$19.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$23.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$77.99

High Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$158.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$147.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$87.99

ENGINE TIMING SET

from

$65.99

ENG TIMING BELT TNS

from

$59.99

ENG TIMING CHAIN KIT

from

$53.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$44.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$37.99

ENGINE TIMING SET

Top-Rated Engine Parts Brands For Your 1985 Ford Mustang

Shop for the best-rated brands offering Engine Parts and other products for your 1985 Ford Mustangs. Below you’ll find some of our best rated Engine Parts from Sealed Power, National, and Dorman, and more. Engine Parts from these brands that fit a 1985 Mustang start at just $0.43 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Sealed Power 1985 Ford Mustang Engine Parts

When it comes to maintaining or upgrading your 1985 Ford Mustang, using quality Engine Parts is essential to ensure durability and a perfect fit. Sealed Power ticks all of those boxes. We offer a wide selection of Sealed Power Engine Parts, specifically designed for the 1985 Ford Mustang. With over 3 Sealed Power brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $0.43, with an average price of just $2.74. Plus, with over 6 customer reviews and an average rating of 4.3 stars, you can trust that our Sealed Power Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $5.29

(1)

Engine Connecting Rod Bearing

“arrived quickly, exactly what I ordered”

from $2.49

(3)

Engine Push Rod

“Seem to be an OK set of push rods.”

from $0.43

(2)

Engine Valve Spring Retainer Keeper

“You guys are always great”

Popular National 1985 Ford Mustang Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1985 Ford Mustang owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1985 Mustang, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Engine Parts range from $12.49 to $36.49, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $29.99

(2)

Engine Crankshaft Seal

“IT HELPS WHEN GOOD PARTS ARE NEARBY.”

from $12.49

(2)

Engine Harmonic Balancer Repair Sleeve

“This was needed for an off-label application, and has done the job perfectly. Service was outstanding, as always!”

from $36.49

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

FAQs for 1985 Ford Mustang Engine Parts

Which Engine Parts are best-sellers for 1985 Ford Mustangs?

Out of 324 Engine Parts that fit 1985 Ford Mustangs, the following parts are the top sellers:

Engine Valve Lifter (5688671) – $12.99
Engine Crankshaft Seal Kit (15780257) – $35.99
Engine Valve Lifter (3718824) – $24.99

What’s the price range for 1985 Ford Mustang Engine Parts?

Engine Part prices for the 1985 Ford Mustang start at $0.43 and go up to $5,877.99 for the most premium parts.

What’s the average price of a Engine Part for a 1985 Ford Mustang?

The average price for Engine Parts for the 1985 Ford Mustang is $188.97. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Ford Mustang model years?

Yes, we currently carry Engine Parts for 55 model years of Ford Mustangs between 1964 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 1985 Ford Mustang?

The cheapest 1985 Ford Mustang Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (3492249) – $1.29
Engine Rocker Arm Ball Stud (19694255) – $1.49
Steel Cup Expansion Plug 3/4 In., Height 0.250 (sold by each) (16140174) – $1.79
Steel Cup Expansion Plug 5/8 In., Height 0.650 (sold by each) (22140407) – $1.79

What are the top-rated Engine Parts that fit the 1985 Ford Mustang?

Out of 1,424 reviews by customers, our 1985 Ford Mustang Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1985 Ford Mustang and their top-rated products:

Engine Gaskets and Seals
- Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (20680305) – $52.99
- Engine Valve Cover Gasket Set (5182255) – $26.99
- Engine Valve Cover Gasket Set (5180015) – $25.99
Valve Cover and Cylinder Heads
- Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (20680305) – $52.99
- Engine Valve Cover Gasket Set (5182255) – $26.99
- Engine Valve Cover Gasket Set (5180015) – $25.99

What types of Engine Parts do you sell for my 1985 Ford Mustang?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1985 Ford Mustang:

Can I get help with 1985 Ford Mustang Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Parts and more.

What is your return policy for Ford Mustang Engine Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Ford Mustang Engine Parts

Sealed Power – Camshaft Bearing Set (Part No.2102M)

Sealed Power – Engine Piston Ring Set (Part No.E-1005K)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1157)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26553 PT)

Felpro – Engine Variable Valve Timing (VVT) Sensor Seal (Part No.ES 73032)

Felpro – Turbocharger Mounting Gasket (Part No.61717)

PowerBond – Street Performance Harmonic Balancer; 165mm Diameter (Part No.PB1009ST)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46061)

Sealed Power – Engine Push Rod (Part No.RP-3284)

Dorman – Brass Pipe Plug – Square Head – 1/4 In. MNPT (Part No.785-071D)

Dorman – Timing Cover with Gasket and Seal (Part No.635-102)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2257)

Dorman – Rubber Expansion Plug 2 In. – Size Range 2 In. – 2-1/8 In. (sold by each) (Part No.570-014)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9250 PT-2)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Dorman – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Sold by each) (Part No.555-068)

Dorman – Oil Pan Bolts Or Auxiliary Pump Bolts – M6-1.0 X 22 MM (Part No.990-662)

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10114-01)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Sealed Power – Engine Valve Lifter (Part No.HT-900)

Schaeffler – Repair Sleeve (Part No.SR3506)

National – Engine Crankshaft Seal (Part No.482041N)

Felpro – PermaTorque Engine Gasket Set (Part No.FS 7916 PT-2)

Spartan – Engine Complete Assembly; FORD 302 PERF COMP/DYNO (Part No.HP78C)

Cloyes Performance – High Performance Timing Set (Part No.9-3135-5)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL35-600-4)

Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)

Edelbrock – Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 (Part No.7122)

Sealed Power – Engine Valve Lifter (Part No.HT-900)

Sealed Power – Engine Valve Lifter (Part No.HT-2012)

Sealed Power – Engine Camshaft Bearing Set (Part No.1204M)

Dorman – Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each) (Part No.555-033)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (Part No.362563.1)

National – Shaft Repair Sleeve (Part No.99166)

Sealed Power – Engine Camshaft Bearing Set (Part No.1443M)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.31-601-5)

National – Multi Purpose Seal (Part No.2955)

Dorman – Steel Cup Expansion Plug 2-3/16 In. SC, Height 0.360 (sold by each) (Part No.555-051)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit (Part No.CL31-603-5)

Competition Cams – Magnum Computer Control/BLower 220/224 Hydraulic Roller Cam/Lifter Kit Ford 5.0L (Part No.CL35-312-8)

Competition Cams – Magnum 206/206 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L (Part No.CL35-410-8)

Competition Cams – Magnum 230/230 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L (Part No.CL35-450-8)

Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam K-Kit (Part No.K35-512-8)

Competition Cams – XE Computer Controlled 224/232 Hydraulic Roller Cam and Lifter Kit (Part No.CL35-518-8)

Competition Cams – Magnum 215/215 Hydraulic Roller Cam for Ford 5.0L (Part No.35-420-8)

Competition Cams – Xtreme Energy Computer Controlled 224/230 Cam for Ford 5.0L (Part No.35-328-8)

Competition Cams – Xtreme Energy Computer Controlled 218/224 Cam for Ford 5.0L (Part No.35-324-8)

Competition Cams – XFI Computer Controlled 236/248 Hydraulic Roller Cam for Ford 351W (Part No.35-775-8)

Competition Cams – XFI Computer Controlled 248/258 Hydraulic Roller Cam for Ford 351W (Part No.35-776-8)

Competition Cams – Xtreme Energy Computer Controlled 212/218 Cam for Ford 5.0L (Part No.35-320-8)

Competition Cams – Magnum 206/206 Hydraulic Roller Cam for Ford 5.0L (Part No.35-410-8)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8548 PT-2)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Push Rod (Part No.RP-3167)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9280 PT-2)

Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9333 PT-1)

Sealed Power – Engine Valve Lifter (Part No.HT-2205)

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Dorman – STD Cylinder Head Bolt, 7/16-14 x 3.938 x 1-1/16 In., Hex 5/8 In. (Sold by each) (Part No.675-131)

Sealed Power – Engine Push Rod (Part No.RP-3241)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8993 PT-1)

Edelbrock – Signature Series Valve Covers: Small Block Ford 221-351W 62-95, Chrome Steel (Part No.4460)

ARP Auto Racing – For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile (Part No.154-3601)

Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5807G)

Felpro – Engine Cylinder Head Dowel Pin Set (Part No.ES 74011)

Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.950G)

Sealed Power – Engine Exhaust Valve (Part No.V-1961)

Mr. Gasket – Mls Head Gasket (Part No.3175G)

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Competition Cams – HYDRAULIC LIFTER SET, SBFORD 1 ST (Part No.832-16)

ARP Auto Racing – For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16 (Part No.134-7104)

Dorman – Pipe Plug C.S. Hex 3/4-14 Npt x 5/8 In. (Sold by each) (Part No.090-072)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 T)

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 13260 T)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 13260 C)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50043 R-1)