1985 Ford F-150 Differentials

Essential 1985 Ford F-150 Differentials

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 44 and Toyota 8″ and V6
See More

Yukon Gear – Extra HD 3.250" Nodular Iron Dropout For Ford 9" With Load Bolt (Part No.32151)

Extra HD 3.250" Nodular Iron Dropout For Ford 9" With Load Bolt

from

$877.99
Yukon Extra HD 3.250″ nodular Iron dropout for Ford 9″ with load bolt. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Load bolt design prevents gear deflection under heavy loads. Rated up to 1400HP!

Product Features:
  • Fits Ford 9″
  • 3.250″ carrier race diameter
  • Nodular iron for added strength
  • Load-bolt design reduces ring gear deflection under high horsepower
See More

Yukon Gear – Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford (Part No.33333)

Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford

from

$207.99
Standard open or TracLoc cross pin shafts and block in four pinion design for 9″ Ford.

Product Features:
  • Cross pin shaft and block kit
  • Fits Ford 9″
  • Includes cross pin block and three cross pin shafts
See More

National – Bearings (Part No.208)

Bearings

from

$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

National – Bearings (Part No.02820)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Purple Aluminum Pinion Support For 9" Ford Daytona (Part No.32036)

Purple Aluminum Pinion Support For 9" Ford Daytona

from

$264.99
Product Features:
  • Fits Ford 9″ with 28 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • Races installed
  • 6061 aluminum
  • Annodized purple
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)

Standard Spider Gear Set For Ford 8.8", 31 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

USA Standard Gear – Mini Spool For Ford 9" With 28 Spline Axles (Part No.59022)

Mini Spool For Ford 9" With 28 Spline Axles

from

$59.99
Product Features:
  • Fits Ford 9″ with 28 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Motive Gear – Differential Mini Spool (Part No.MS88-31)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL 8.8 FORD 31SPL
See More

Yukon Gear – Minor Install Kit For Ford 9" Differential (Part No.12036)

Minor Install Kit For Ford 9" Differential

from

$54.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), marking compound and brush.

Product Features:
  • Fits Ford 9″
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13048)

Pinion Install Kit For Ford Daytona 9" Differential

from

$294.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 1541H Alloy Rear Axle For Ford 9" (’77 And Newer) (Part No.21208)

1541H Alloy Rear Axle For Ford 9" ('77 And Newer)

from

$234.99
Yukon 1541H alloy rear axle for Ford 9″ (’77 and newer) measures 32″ and has 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Uses set20 bearings.

Product Features:
  • Fits 1977 and up Ford 9″ in F150 and Bronco
  • 31 spline
  • 32″ long
  • 5 lug
See More

Dorman – Ring And Pinion Master Installation Kit (Part No.697-031)

Ring And Pinion Master Installation Kit

from

$396.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:
  • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
  • Related repair – smart to have on hand when installing a differential ring and pinion
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)

Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline

from

$299.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline Trac Loc positraction
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – 7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver (Part No.30226)

7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver

from

$30.99
7.5″, 8″, 8.8″, 9″, 10.25″ Ford REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Ford 7.5″, 8.8″, 9″ and 10.25″
See More

Felpro – Differential Cover Gasket (Part No.RDS 55394)

Differential Cover Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Grizzly Locker, Ford 8.8" With 28 Splines (Part No.28034)

Grizzly Locker, Ford 8.8" With 28 Splines

from

$1136.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – O-Ring For 9" Ford (Part No.30028)

O-Ring For 9" Ford

from

$14.99
O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion support o-ring
  • Fits Ford 9″
See More

Popular 1985 Ford F-150 Differentials Categories

1985 Ford F-150 Differentials

Maybe you’re in the middle of a full rebuild of that 1985 Ford F-150. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 631 different Differentials in our inventory ranging from $0.99 to $2,199.99. That means you can find the exact parts or products you need to keep that 1985 Ford F-150 running smoothly.

Differentials are only as good as their brand. We stock 21 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Ford F-150. FELPRO, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1985 Ford F-150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,032 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Differential Master Bearing Kit – Timken with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1985 Ford F-150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1985 Ford F-150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Ford F-150 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 1985 Ford F-150, our most popular Powertrax Differentials include:
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
Differential Open Unit and Components

Top 1985 Ford F-150 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1985 Ford F-150. Popular Felpro parts include:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Differential Cover Gaskets
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

FAQs for 1985 Ford F-150 Differentials

What are the most purchased Differentials for the 1985 Ford F-150?

Out of 631 Differentials for the 1985 Ford F-150, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Rear Differential Cover
from $34.99
(34)
Rear Differential Cover
Differential Covers
Tapered Cone/Cup Wheel Bearing Set
from $7.79
(9)
Tapered Cone/Cup Wheel Bearing Set
Differential Bearings

What are the top-rated 1985 Ford F-150 Differentials?

Top-rated Differentials for your 1985 Ford F-150 based on customer reviews/ratings are:
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Differential Master Bearing Kit - Timken
from $137.99
(8)
Differential Master Bearing Kit – Timken
“These Timken bearings work great in my 10 second drag car.”
Bearings
from $23.99
(7)
Bearings
“Good price”