2016 Ford F-150 Differentials

Essential 2016 Ford F-150 Differentials

Pro-King – Differential Bearing Cup (Part No.764A271)

Differential Bearing Cup

from

$21.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Differential Pinion (Part No.33577)

Differential Pinion

from

$44.99
Differential Pinion

Pro-King – Differential Pinion Shim Kit (Part No.763B200)

Differential Pinion Shim Kit

from

$41.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Standard Open Carrier Case, Ford 10.25" & 10.5" (Part No.20068)

Standard Open Carrier Case, Ford 10.25" & 10.5"

from

$398.99
Ford 10.25″ & 10.5″ carrier case, standard Open.

Product Features:
  • Standard open carrier case
  • Fits Ford 10.25″
  • Does not include spider gears
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Super Carrier Shim Kit For Ford 9.75" (Part No.55062)

Super Carrier Shim Kit For Ford 9.75"

from

$94.99
9.75″ Ford Supershim carrier shim kit.

Product Features:
  • Super carrier shim kit for Ford 9.75″
  • Interlocking design makes installation much easier
See More

Yukon Gear – Steel Cover For Dana 44 Standard Rotation (Part No.32319)

Steel Cover For Dana 44 Standard Rotation

from

$129.99
Product Features:
  • Fits standard rotation Dana Spicer 44
  • Steel
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Preload Shim Kit For Chrysler 8.75" & Ford 9"

from

$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:
  • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
See More

Spartan – Drive Axle Assembly; Ford F-150 Lock-up Axle (Part No.RAXP2034C)

Drive Axle Assembly; Ford F-150 Lock-up Axle

from

$1604.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)

Differential Pinion Solid Spacer Kit w/Shims

from

$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Yukon Gear – 0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35 (Part No.33334)

0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35

from

$5.99
0.260″ diameter cross pin roll pin for 8.75″ Chrysler, 8″, 9″ Ford, and Model 20 and 35.

Product Features:
  • Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
  • 0.260″ diameter
See More

Yukon Gear – 1310 And 1330 U/Bolt Kit (2 U-Bolts And 4 Nuts) For 9" Ford (Part No.41112)

1310 And 1330 U/Bolt Kit (2 U-Bolts And 4 Nuts) For 9" Ford

from

$18.99
1310 and 1330 U/bolt kit (2 U-bolts and 4 nuts) for 9″ Ford.

Product Features:
  • u-joint u-bolt kit
  • Fits Ford 9″
  • 1310 and 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Pinion Crush Sleeves

from

$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Install Kit For Dana 44 Reverse Rotation Differential (Straight Axle, Not IFS) (Part No.13026)

Pinion Install Kit For Dana 44 Reverse Rotation Differential (Straight Axle, Not IFS)

from

$213.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits reverse rotation Dana Spicer 44
  • Straight axle only
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More

Yukon Gear – Pinion Gear And Thrust Washer For 9.75" Ford (Part No.33302)

Pinion Gear And Thrust Washer For 9.75" Ford

from

$30.99
Pinion gear thrust washer for 9.75″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 9.75″
See More

USA Standard Gear – Master Overhaul Kit Dana 44 Reverse Front Differential (Part No.37016)

Master Overhaul Kit Dana 44 Reverse Front Differential

from

$364.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits reverse rotation Dana Spicer 44
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)

Ring Gear Bolt

from

$5.49


Product Features:
  • F9.75″ RING GEAR BOLT SOLD INDIVIDUALLY
See More

Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)

Powr Lok Belleville Clutch Plate, Splined

from

$36.99
Product Features:
  • Belleville plate, splined
  • Fits Dana Spicer 44 Powr Lok
See More

Yukon Gear – Bearing Install Kit For ’08-’10 Ford 10.5" Differential (Part No.11122)

Bearing Install Kit For '08-'10 Ford 10.5" Differential

from

$534.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits2007-2010 Ford 10.5″
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55476)

DIFFERENTIAL GASKET

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

2016 Ford F-150 Differentials

Maybe you’re in the middle of a full rebuild of that 2016 Ford F-150. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 122 different Differentials in our inventory ranging from $1.99 to $2,561.99. That means you can find the exact parts or products you need to keep that 2016 Ford F-150 running smoothly.

Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Ford F-150. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2016 Ford F-150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5,062 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.9 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2016 Ford F-150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2016 Ford F-150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Ford F-150 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Housing Cover Gaskets categories, plus more. For a 2016 Ford F-150, our most popular Felpro Differentials include:
DIFFERENTIAL GASKET
from $14.99
(37)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

FAQs for 2016 Ford F-150 Differentials

What are the most purchased Differentials for the 2016 Ford F-150?

Out of 122 Differentials for the 2016 Ford F-150, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2016 Ford F-150 Differentials?

Top-rated Differentials for your 2016 Ford F-150 based on customer reviews/ratings are:
Rear Differential Cover
from $48.99
(14)
Rear Differential Cover
“I was surprised to see these in stock. Nice fix”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $23.99
(7)
Bearings
“Good price”