1985 Chevrolet C10 Suspension Parts

Essential 1985 Chevrolet C10 Suspension Parts

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Adjustable Air Helper Springs for Improved Ride & Handling (Part No.4100)

Adjustable Air Helper Springs for Improved Ride & Handling

from

$149.99
Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:
  • Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
  • Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
  • Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
  • Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
  • No Drill Installation
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

MOOG – Control Arm Bumper (Part No.K6598)

Control Arm Bumper

from

$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

Monroe – Load Adjusting Shock Absorber (Part No.58578)

Load Adjusting Shock Absorber

from

$173.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

ACDelco – Professional Suspension Control Arm Bushing (Part No.L2030588499ACD)

Professional Suspension Control Arm Bushing

from

$22.20
ACDelco Professional, premium aftermarket Suspension Control Arm Bushings are the ideal high-quality aftermarket replacement component for many vehicles on the road today. These professional-grade control arm bushings help prevent potentially damaging contact between the control arm and other components, reducing friction and isolating engine vibration, while allowing your vehicle’s suspension components to move. ACDelco Professional, premium aftermarket Suspension Control Arm Bushings have a metal sleeve/rubber bushing design and use high temperature synthetics for long life and durability. These premium aftermarket replacement suspension control arm bushings are manufactured to meet your expectations for fit, form, and function. ACDelco offers a full line of Professional, premium aftermarket Chassis Parts to keep vehicles riding and handling like new. With competitive warranty coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it’s no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.

Product Features:
  • High temperature synthetics and fatigue resistance support extended service life, even in harsh conditions
  • Silent-bloc metal sleeve/rubber bushing design supports proper alignment, stability, and durability
  • Premium, high-quality aftermarket component
  • Engineered to meet and exceed your expectations for fit, form, and function
  • Provides the performance and dependability you expect from ACDelco
See More

TRW – Control Arm Shaft Ki (Part No.L20321100539TRW)

Control Arm Shaft Ki

from

$44.33
Control Arm Shaft Ki

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

MOOG – Leaf Spring Shackle Bushing (Part No.SB335)

Leaf Spring Shackle Bushing

from

$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA743)

Max-Air Air Shock Absorber

from

$159.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Belltech – 1/2 Inch Lift, Rubber Bushing, Set Of 2 (Part No.6404)

1/2 Inch Lift, Rubber Bushing, Set Of 2

from

$104.99
By Engineering bracketry or replacement components Belltech Shackles and Hangers to reposition the front and/or rear Leaf Spring mounting points Spring eyes you can simply and effectively lower your Leaf Spring equipped sport truck or SUV without changing the factory Leaf Spring. This allows you to retain OEM Ride Quality and possibly more importantly factory load capacity. At Belltech, we offer both Belltech Shackles and Hangers as individual components as well as complete kits depending on your Lowering requirements. Belltech Shackle kits are designed drop the rear of your sport truck or SUV up to 2 Inches. For some applications we also offer a 1/2 Inch lifting Shackle kits. Belltech Shackle kits are constructed from Heavy Gauge die stamped P and O Steel to insure a perfect fit and superior quality. All Shackles are powder coated and feature OEM quality silent bloc rubber bushings and that do not need maintenance unlike polyurethane

Product Features:
  • To Reposition The Front And/Or Rear Leaf Spring Mounting Points Spring Eyes You Can Simply And Effectively Lower Your Leaf Spring Equipped Sport Truck Or SUV Without Changing The Factory Leaf Spring
  • This Allows You To Retain OEM Ride Quality And Possibly More Importantly Factory Load Capacity
  • Belltech Shackle Kits Are Designed Drop The Rear Of Your Sport Truck Or SUV Up To 2 Inches
  • For Some Applications We Also Offer A 1/2 Inch Lifting Shackle Kits
  • Belltech Shackle Kits Are Constructed From Heavy Gauge Die Stamped P And O Steel To Insure A Perfect Fit And Superior Quality
  • All Shackles Are Powder Coated And Feature OEM Quality Silent Bloc Rubber Bushings And That Do Not Need Maintenance Unlike Polyurethane
See More

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Energy Suspension – Shackle Eye Set (Part No.3.2124R)

Shackle Eye Set

from

$23.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated (Part No.2178)

Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated

from

$776.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Designed To Provide Inflation Control Of Your Air Helper Springs
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Monroe – Gas-Matic Truck Shock Absorber (Part No.59044)

Gas-Matic Truck Shock Absorber

from

$53.99
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic light trucks and vans
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Belltech – 6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware (Part No.6850)

6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware

from

$386.99
Belltech flip kits are the leading standard in the industry. When a mild drop is just not enough, Belltech can bring the heat. Belltech flip kits provide dramatic Lowering on the rear of your sport truck or SUV by relocating the rear axle of your truck from under to on top of the Leaf Spring.

Product Features:
  • Belltech Flip Kits Provide Dramatic Lowering On The Rear Of Your Sport Truck Or SUV By Relocating The Rear Axle Of Your Truck From Under To On Top Of The Leaf Spring
  • Kits Are Bulletproof Over Engineered Frame Modification And Reinforcement Systems That Allow For Additional Compression Or Upward Travel Of Your Rear Suspension, Essential In Limiting Bottoming Out
  • All Belltech C-Section Kits Are Manufactured With Heavy Duty Stamped Steel Contoured To Match The Factory Frame Rails
  • All Kits Feature A Durable Powder Coat Finish And The Highest Quality Hardware Using Grade 8 Fasteners
  • Belltech C-Sections Are Designed To Increase Overall Suspension Travel On Vehicles Utilizing Lowering Kits That Create Limited Rear Axle Travel
See More

MOOG – Coil Spring Set (Part No.6454)

Coil Spring Set

from

$183.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Belltech – Coil Spring (Part No.4700)

Coil Spring

from

$224.99
Belltech Lowering Coil Springs have been engineered to provide the visual lowering you are looking for with the OEM quality that you have come to expect from Belltech. Unlike many other offerings on the market, Belltech specializes in not only ride comfort and quality, but increasing the handling performance of your Sport Truck or SUV as well. Each coil is manufactured from chromium alloy steel and is wound, shot peened then powder coated to exact specifications to assure the proper ride height, ride quality and long life you have come to expect from Belltech products.

Product Features:
  • Engineered To Provide The Visual Lowering You Are Looking For With The OEM Quality
  • Increases The Handling Performance Of Sport Truck Or SUV
  • Each Coil Is Manufactured From Chromium Alloy Steel And Is Wound, Shot Peened Then Powder Coated To Exact Specifications To Assure The Proper Ride Height, Ride Quality And Long Life
  • Limited 1 Year Warranty
See More

Belltech – 2 Inch Drop, Powder Coated, Black, Set Of 2 (Part No.4702)

2 Inch Drop, Powder Coated, Black, Set Of 2

from

$233.99
Belltech Lowering Coil Springs have been engineered to provide the visual lowering you are looking for with the OEM quality that you have come to expect from Belltech. Unlike many other offerings on the market, Belltech specializes in not only ride comfort and quality, but increasing the handling performance of your Sport Truck or SUV as well. Each coil is manufactured from chromium alloy steel and is wound, shot peened then powder coated to exact specifications to assure the proper ride height, ride quality and long life you have come to expect from Belltech products.

Product Features:
  • Engineered To Provide The Visual Lowering You Are Looking For With The OEM Quality
  • Assure The Proper Ride Height, Ride Quality And Long Life
  • Each Coil Is Manufactured From Chromium Alloy Steel And Is Wound, Shot Peened Then Powder Coated To Exact Specifications To Assure The Proper Ride Height, Ride Quality And Long Life
  • Powder Coated Finish
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9101R)

Control Arm Bump Stop Set

from

$25.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9101G)

Control Arm Bump Stop Set

from

$25.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Energy Suspension – Hyper-Flex System (Part No.3.18109R)

Hyper-Flex System

from

$356.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Hyper-Flex System (Part No.3.18108G)

Hyper-Flex System

from

$374.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34817)

Gas-Magnum Shock Absorber

from

$77.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37049)

OESpectrum Light Truck Shock Absorber

from

$70.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

1985 Chevrolet C10 Suspension Parts

You count on your 1985 Chevrolet C10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 69 Suspension Parts ranging in price from $10.99 to $1,217.99, you’re sure to find everything you need for your 1985 Chevrolet C10.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 14 different brands like Valvoline, Monroe, and Moog. 1985 Chevrolet C10 Suspension Parts start as low as $10.99!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 912 extensive product reviews on 1985 Chevrolet C10 Suspension Parts. Some of the top-rated Suspension Parts products we carry are Gas-Matic Truck Shock Absorber with 4.7 stars and Gas-Matic LT Shock Absorber with 4.6 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1985 Chevrolet C10 below to get started!

Top-Rated Suspension Parts Brands For Your 1985 Chevrolet C10

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Chevrolet C10 running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.

Popular Driveworks Suspension Parts

You’ll find popular Driveworks brand products across Control Arms. All are waiting to get your 1985 Chevrolet C10 back on the road. Some of the top-rated Driveworks products in these categories are:
Control Arm Bushing
from $16.29
(13)
Control Arm Bushing
Lower Control Arm Bushings
Control Arm Bushing
from $20.29
(8)
Control Arm Bushing
Lower Control Arm Bushings

FAQs for 1985 Chevrolet C10 Suspension Parts

What are the most purchased Suspension Parts for the 1985 Chevrolet C10?

Out of 69 Suspension Parts for the 1985 Chevrolet C10, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Gas-Matic LT Shock Absorber
from $37.99
(6)
Gas-Matic LT Shock Absorber
Rear Shock and Struts

What are the top-rated 1985 Chevrolet C10 Suspension Parts?

Top-rated Suspension Parts for your 1985 Chevrolet C10 based on customer reviews/ratings are:
Gas-Matic Truck Shock Absorber
from $53.99
(12)
Gas-Matic Truck Shock Absorber
“Fit exactly like the old ones. Decent shocks for the price.”
Gas-Matic LT Shock Absorber
from $43.49
(9)
Gas-Matic LT Shock Absorber
“Awesome shocks!”
RS5000 Shock Absorber
from $66.99
(7)
RS5000 Shock Absorber
“Installed on 1988 Ford F-150. Easy to install and all parts needed were included.”