1985 AMC Eagle Drivetrains
More 1985 AMC Eagle Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1985 AMC Eagle, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1985 AMC Eagle Drivetrains
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Replacement Complete Shim Kit For Dana 30 Front (Part No.55022)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
National – Multi Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Inner Axle Dust Shield For Dana 30 (Part No.33442)
USA Standard Gear – Ring & Pinion Gear Set For Model 35 In A 4.11 Ratio (Part No.36236)
from
$282.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits standard rotation AMC Model 35
- 7.562″ ring gear diameter
- 26 spline pinion
- 8 ring gear bolts
- 4.11 ratio
Felpro – DIFFERENTIAL GASKET (Part No.RDS 13089)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)
from
$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- 3.73 and up ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Yukon Gear – Master Overhaul Kit For Model 35 Differential (Part No.14109)
from
$339.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits AMC Model 35
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
National – Bearings (Part No.AXK-5070)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Super Carrier Shim Kit For Model 35 (Part No.55063)
from
$54.99
Model 35 differential carrier Supershim kit.
Product Features:
See More
Product Features:
- Super carrier shim kit for AMC Model 35
- Interlocking design makes installation much easier
Yukon Gear – Model 35 C/Clip (Part No.33076)
Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)
from
$17.99
Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo
Product Features:
See More
Product Features:
- Pinion depth shims for AMC Model 35 and Chrysler 7.25″
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Yukon Gear – Pinion Install Kit For Dana 30 Front Differential (Part No.13016)
from
$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30
- Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Model 35 Standard Open Pinion Gear Thrust Washer (Part No.33291)
from
$10.99
Product Features:
See More
- Pinion gear thrust washer
- Fits AMC Model 35
- 0.685″ I.D.
- With step
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82001)
from
$109.99
N
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Yukon Gear – Model 35 Cover Gasket (Part No.23026)
Motive Gear – Differential Gear Install Kit (Part No.D35IKJ)
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
National – Shaft Repair Sleeve (Part No.99225)
from
$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.02820)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)
from
$121.99
Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles – Hubs Have 1.625" Diameter (Part No.16129)
from
$275.99
Yukon standard open spider gear kit for Model 35 with 27 spline axles. hubs have 1.625″ diameter (used in ’93 and older models). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits AMC Model 35 open differential with 1.620″ side gear bore
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
USA Standard Gear – Master Overhaul Kit for the Model 35 Differential (Part No.37066)
from
$225.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits AMC Model 35
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Popular 1985 AMC Eagle Drivetrains Categories
1985 AMC Eagle Drivetrains
You count on your 1985 AMC Eagle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 258 Drivetrains ranging in price from $2.29 to $1,303.99, you’re sure to find everything you need for your 1985 AMC Eagle.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Valvoline, Moog, and Driveworks. 1985 AMC Eagle Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,783 extensive product reviews on 1985 AMC Eagle Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.2 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1985 AMC Eagle below to get started!
Top-Rated Drivetrains Brands For Your 1985 AMC Eagle
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 AMC Eagle running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1985 AMC Eagle back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1985 AMC Eagle, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1985 AMC Eagle Drivetrains
What are the most purchased Drivetrains for the 1985 AMC Eagle?
Out of 258 Drivetrains for the 1985 AMC Eagle, the most popular in our inventory are:
What are the top-rated 1985 AMC Eagle Drivetrains?
Top-rated Drivetrains for your 1985 AMC Eagle based on customer reviews/ratings are:
from
$16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
“100% recommended, very good attention, it was my first time shopping online in the store, without delay and any problem.
Thank you.”
