1984 Lincoln Continental Performance and Racing Products
More 1984 Lincoln Continental Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1984 Lincoln Continental, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1984 Lincoln Continental Performance and Racing Products
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit for Ford 351W (Part No.CL35-250-4)
from
$373.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Chrome Dress-Up Kit (Part No.9833)
from
$149.99
Kits include most popular chrome dress-up components, including short, OEM height valve covers with integral oil baffles.
Product Features:
See More
Product Features:
- Includes oil baffles
- Chrome plated
Edelbrock – Pushrod Set for Ford 351W (Part No.9659)
from
$190.99
Edelbrock part #9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise f
Product Features:
See More
Product Features:
- 7.7 in. Length
- 0.312 in. Diameter
- 4130 Chromoly Steel Material
- Black Oxide Finish
- Made In The USA
Edelbrock – Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set (Part No.7335)
from
$185.99Product Features:
- Dial-In Your Camshaft With Ease
- Made From Induction Hardened Billet Steel
- Solid Bushing Chain Resists Stretching
- Billet SAE-1144 Steel Crank Sprockets
- Multiple Keyways
Spectre – Oil Pan (Part No.5490)
from
$196.99
Spectre’s Chrome Oil Pans feature a front sump and triple chrome plating. This product is designed to fit Ford passenger cars and 2 wheel drive trucks with 351C, 351M, and 400 engines. This OEM replacement oil pan is manufactured using high quality materials and is engineered for optimum fit and function.
Product Features:
See More
Product Features:
- Triple chrome-plated
- Steel construction
- Front sump
- OEM replacement.
Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)
from
$40.99
Super Intake Manifold Bolts
Accel – Custom Fit Super Stock Spiral Spark Plug Wire Set, 8mm, Blue (Part No.5046B)
from
$85.99
ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- Spiral Core
- Silicone Spark Plug Boots
- 500 Ohms Per Foot Resistance
- 550 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Magnetic Suppression
- 500 Ohms Resistance
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1617)
from
$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Accel – Distributor Cap And Rotor Kit (Part No.8230)
MSD Ignition – Distributor Cap; Ford HEI (Part No.8408)
from
$51.99
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont? Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
Edelbrock – Performer 460; Intake Manifold (Part No.21661)
from
$604.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1018)
from
$49.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Ultra Seal; Oil Pan Gasket (Part No.6683)
from
$54.99
Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Maxi-seal fiber material
- Superior blow-out resistance
- High-tensile strength
- Reduces gasket splitting
- Graphite non-wicking rubber
- No cork particles
- Easy removal for disassembly
Mr. Gasket – Ultra Seal; Sure-Lock Rocker Arm Nuts (Part No.923G)
from
$77.99
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.
Product Features:
See More
Product Features:
- Sure-lock rocker arm nuts
- Precise valve train adjustment
- Keep rocker arms locked
- High-quality grade steel
- Heat-treated for ex strength
- Plated with durable gold tone finish
Mr. Gasket – Ultra Seal; Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$35.99
The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.
Product Features:
See More
Product Features:
- Grade 8 material
- Heat-treated for strength
- Hex prevents socket slippage
- Accurate and uniform torque
- Black plated finish
Edelbrock – Classic Series Valve Covers: Small Block Ford 221-351W 62-95, Polished Aluminum (Part No.4160)
from
$381.99
The Edelbrock #4160 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Small Block Ford 221-351W 62-95
- Tall
- Polished Aluminum
- Set Of Two
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$100.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)
from
$259.99
The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.
Product Features:
See More
Product Features:
- Ideal As Column Shift Replacement
- Includes Neutral Safety Switch
- Includes Black T-Handle
- Backup Light Not Available
- Includes 5 ft. Cable and Hardware
- Includes Boot and Plate
B & M – Shift Improver Kit, 80-92 AOD Transmission (Part No.40263)
from
$71.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Weiand – Action +Plus; Water Pump (Part No.8209P)
from
$300.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.
Product Features:
See More
Product Features:
- Fits Later Applications w/Water Inlet On LH Side
- Street Performance
- Heavy Duty Shaft w/5/8 in. Pilot
- Six-Blade Stamped Steel
- Anti-Cavitation Impeller
- 100 Percent Leak Tested
- Bearing Shaft And Seal
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1419)
from
$26.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer; Cylinder Head (Part No.60299)
from
$757.99Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- Torque Improved Over Stock
- Accept V8 Pedestal Rocker Arms
- Accept V8 Valvetrains
Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)
from
$107.99Product Features:
- Highest Quality Head Bolts
- Cold-Formed/Heat Treated
- Ensures Molecular Integrity
- Reduced Diameter Bolt Heads
- Hardened/Parallel-Ground Washers Included
- Rated At 170000 psi
- Manufactured By ARP
B & M – CONVERTER AOD HP (Part No.40437)
from
$297.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Popular 1984 Lincoln Continental Performance and Racing Products Categories
1984 Lincoln Continental Performance and Racing Products
You count on your 1984 Lincoln Continental to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 63 Performance and Racing Products ranging in price from $10.49 to $1,157.99, you’re sure to find everything you need for your 1984 Lincoln Continental.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 13 different brands like K&N, Accel, and MSD Ignition. 1984 Lincoln Continental Performance and Racing Products start as low as $10.49!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 164 extensive product reviews on 1984 Lincoln Continental Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are 289-302 Ford Head Bolt Kit with 2.0 stars and High Perf. Full-Flow Lube Spin-on with 4.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1984 Lincoln Continental below to get started!
Top-Rated Performance and Racing Products Brands For Your 1984 Lincoln Continental
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Lincoln Continental running right for years to come. In our inventory you’ll find brands like K&N, Accel, MSD Ignition, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1984 Lincoln Continental back on the road. Some of the top-rated K&N products in these categories are:
from
$17.99
(23)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
Top-Rated Performance and Racing Products
If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1984 Lincoln Continental, and some of our most reviewed parts include:
FAQs for 1984 Lincoln Continental Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1984 Lincoln Continental?
Out of 63 Performance and Racing Products for the 1984 Lincoln Continental, the most popular in our inventory are:
from
$51.99
(48)
Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95
Performance Distributor Cap and Rotor Kits
from
$33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
from
$52.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
What are the top-rated 1984 Lincoln Continental Performance and Racing Products?
Top-rated Performance and Racing Products for your 1984 Lincoln Continental based on customer reviews/ratings are:
from
$107.99
(7)
289-302 Ford Head Bolt Kit
“Great quality bolts. They include thread locker. Would definitely recommend to anyone replacing their heads.”
from
$16.99
(4)
High Perf. Full-Flow Lube Spin-on
“Filter size for my boat. OMC 460. works fine. HP filters have a bypass so that clogs do not cause the engine to starve for oil… important for HP eng”
