1980 Cadillac Seville Steering and Chassis Parts
More 1980 Cadillac Seville Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1980 Cadillac Seville, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1980 Cadillac Seville Steering and Chassis Parts
ACDelco – Professional Steering Tie Rod End (Part No.M3010591536ACD)
from
$88.30
An ACDelco Professional Steering Tie Rod End is an ideal high-quality aftermarket replacement for many vehicles on the road today. It connects your vehicle’s steering linkage to the steering knuckle. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Superb strength for durability
- Consistent torque for smooth operation
- Full ball stud
- Low-friction double bearing for high impact resistance
- Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
- Full ball stud for tighter overall fit
- Dust boot is re-installed and permanently attached to reduce contamination, increase durability, and service life
- Fused polyurethane dust boot resists cracking, splitting, dry rot, and corrosion
Driveworks – Oil Seal (Part No.S-3553)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Lares – Remanufactured Power Steering Pump (Part No.2312)
from
$65.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Carquest Premium – Return Hose Assembly (Part No.40103)
from
$35.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
MOOG – Idler Arm (Part No.K6251T)
from
$97.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)
from
$124.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Help – Power Steering Caps (Part No.82581)
from
$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Rare Parts – Sway Bar Link Kit (Part No.RP22191)
from
$26.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Cardone – Remanufactured Power Steering Gear Box (Part No.27-6530)
from
$191.99
The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
- 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
- All critical components are tested to ensure product reliability.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
- Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Powercraft – Steering Gear Major Seal Kit (Part No.7859)
from
$52.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Energy Suspension – Sway Bar End Link Kit (Part No.9.8117G)
from
$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Pitman Arm (Part No.RP20441)
from
$70.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Steering Damper Cylinder (Part No.SSD56)
from
$86.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)
from
$9.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Ball Joint (Part No.K6145T)
from
$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Cam Bolt Kit (Part No.RP15884)
from
$122.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves vehicle handling
- Restores OE alignment
- Improves steering geometry
- Easy camber adjustment
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)
from
$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
MOOG – Ball Joint (Part No.K5331)
from
$51.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
ACDelco – Tie Rod End Adjustin (Part No.M3012577485ACD)
from
$24.35
Tie Rod End Adjustin
Rare Parts – Sway Bar Bushing (Part No.RP15791)
from
$13.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Popular 1980 Cadillac Seville Steering and Chassis Parts Categories
1980 Cadillac Seville Steering and Chassis Parts
You count on your 1980 Cadillac Seville to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 81 Steering and Chassis Parts ranging in price from $2.99 to $271.99, you’re sure to find everything you need for your 1980 Cadillac Seville.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Imperial, Driveworks, and Cardone. 1980 Cadillac Seville Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,722 extensive product reviews on 1980 Cadillac Seville Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 3.9 stars and Ball Joint with 4.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1980 Cadillac Seville below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1980 Cadillac Seville
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Cadillac Seville running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Cardone, and even more.
Popular Energy Suspension Steering and Chassis Parts
You’ll find popular Energy Suspension brand products across Sway Bars. All are waiting to get your 1980 Cadillac Seville back on the road. Some of the top-rated Energy Suspension products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1980 Cadillac Seville, and some of our most reviewed Imperial parts include:
FAQs for 1980 Cadillac Seville Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1980 Cadillac Seville?
Out of 81 Steering and Chassis Parts for the 1980 Cadillac Seville, the most popular in our inventory are:
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1980 Cadillac Seville Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1980 Cadillac Seville based on customer reviews/ratings are:
