1980 BMW 320i Fluids and Chemicals
More 1980 BMW 320i Fluids and Chemicals Categories
If you’re looking for an original Fluids and Chemicals replacement for a 1980 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Fluids and Chemicals to meet your needs.
Essential 1980 BMW 320i Fluids and Chemicals
Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No.8114117)
from
$20.99
Pentofrost NF is an environmentally friendly antifreeze concentrate for multipurpose applications in water-cooled engines. It does not contain any nitrites, amines or phosphorous containing additives. Pentofrost NF protects all material used in cooling systems and is recommended for non ferrous metals and year-round use. Meets ASTM D-3306. Warning: this product contains substances known to the state of California to cause birth defects or other developmental harm.
Product Features:
See More
Product Features:
- Manufactured to the OE applications specific formulation.
- Manufactured to the exact spec of DIN and ASTM D-3306.
- Protects against corrosion and cavitation.
- Does not foam.
FRAM – Antifreeze & Coolant: 50/50 Ready To Use, OE North American Gold, 1 Gallon (Part No.F301)
from
$13.99
Fram Extended Life AMAM Concentrate is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.
Product Features:
See More
Product Features:
- Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT
- 5 Yr., 150,000 mile Extended life formula.
- Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
- Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
FRAM – Antifreeze & Coolant: Concentrate, Conventional Green, 1 Gallon (Part No.F101)
from
$18.99
FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.
Product Features:
See More
Product Features:
- Low Silicate Formula
- When used as directed, will provide protection for a minimum of 1 year
- Meets or exceeds ASTM requirements for cars, light duty trucks
- Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
FRAM – Heavy Duty Antifreeze and Coolant: 50/50 Ready To Use, Universal , 1 Gallon (Part No.F201)
from
$15.99
Antifreeze Conventional Green 50/50 is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. Prime Green 50/50 can be used to top-off cooling systems in vehicles using conventional AF/C, will not harm rubber parts, and meets ASTM D3306 and D4985 standards.
Product Features:
See More
Product Features:
- Low Silicate Formula.
- When used as directed, will provide protection for a minimum of 1 year
- Meets or exceeds ASTM requirements for cars, light duty trucks
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
Peak – Original Equipment Euro Blue Antifreeze and Coolant: 50/50 Ready To Use, 1 Gallon (Part No.PEBB53)
from
$19.99
PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of European vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE is an ethylene glycol-based antifreeze/coolant specifically developed for use in any European vehicle requiring a Blue silicate-enhanced hybrid organic acid technology (Si-HOAT) formula. It contains high-quality organic and inorganic corrosion inhibitors and is free of nitrite, phosphate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE meets the performance requirements of ASTM D3306 and BS 6580. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
Product Features:
See More
Product Features:
- Matches each European vehicle manufacturer’s technology and color requirements
- Protects all cooling system metals from rust and corrosion
- Meets the performance requirements of ASTM D3306 and BS 6580
- Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
- Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
- Available as both concentrate and 50/50 products to do the job right
- Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Castrol – Transmax ATF / CVT Universal Automatic Transmission Fluid, 1 Gallon (Part No.15E0C8)
from
$25.99
Castrol Transmax ATF/CVT Universal is a technologically advanced full-synthetic formulation designed to deliver excellent performance in most of the traditional stepped automatic transmissions and Continuously Variable Transmissions currently in use. It is also suitable for use in hybrids.
Product Features:
See More
Product Features:
- Coverage of over 300 specs/95% of vehicles in operation
- Broad scope of vehicle applications improves workshop efficiency and inventory management
- Enhanced friction durability for smooth transmission performance
- Superior high temperature protection to effectively resist oxidation
Castrol – Transmax ATF High Mileage Automatic Transmission Fluid: 1 Gallon (Part No.1599F1)
from
$49.99
Castrol Transmax High Mileage is specially formulated for transmissions with over 75,000 miles to deliver superior performance for maximum transmission life. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting and can be used in a wide variety of specifications including DEXRON®-IIIH, MERCON® and JASO-1A.
Product Features:
See More
Product Features:
- Additional seal conditioners help stop leaks.
- Extra cleaning agents reduce varnish and sludge formation.
- Protects against clutch wear and restores smooth shifting.
- Recommended for use in new & older vehicles that require:
FRAM – Full Synthetic Global Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F470)
from
$11.49
FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of many transmissions manufactured by North American, Asian, and European OEMs. FRAM Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal stability, resulting in maximum service life.
Product Features:
See More
Product Features:
- Maintains friction control for smooth shift action and protection against shudder
- Retains high temperature viscosity resulting in maximum oil film thickness and excellent wear
- Controls sludge, corrosion, and wear of gears
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
- TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
Castrol – BP Petroleum Autran Syn 295 Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.709732)
from
$71.99
Full-Synthetic; Heavy Duty Automatic Transmission; BP Autran Syn-295 is a full-synthetic, heavy duty automatic transmission fluid approved for use under Allison TES-295. It is formulated to maintain its stability, even under the most severe operating conditions.
Product Features:
See More
Product Features:
- Formulated with high viscosity index 100% synthetic base fluids and specific additives in order to exceed Allison requirements and provide outstanding wear protection
- Keeps transmissions cooler, offering excellent shear stability, low oxidation and high heat capacity
- Provides superior high/low temperature performance due to high VI synthetic base fluids and has excellent corrosion and foaming resistance
- BP Autran Syn-295 also has an Allison TES-468 approval for use in Allison Hybrid Electric Drive Transmissions
- Other OEM approvals include Allison C-4, Voith and ZF transmissions
- BP Autran Syn-295 is an ideal transmission fluid for light duty application vehicles, such as:
- Inter/intra-city buses & school buses
- Emergency vehicles
- Delivery trucks & vans
- Recreational vehicles & motor homes
- Refuse vehicles
- On/off-highway vehicles
Prestone – MAX DOT 4 Brake Fluid, 32 fl. oz., Synthetic, Highest Grade, 75,000 Mile (Part No.AS810)
from
$15.49
Prestone® MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 75,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
- Superior Protection in Extreme Braking Conditions
- Synthetic, Long Life Formula – 1.5X Longer than regular Prestone DOT 4
Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz. (Part No.AS800Y)
from
$7.99
Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, Prevents Overheating & Brake Fade, 50k miles, 32 oz (Part No.AS801Y)
from
$13.49
Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
Pentosin – DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter (Part No.1224204)
from
$88.99
Pentosin DOT 4 LV is a special brake fluid of highest DOT 4 performance levels and extremely low viscosity at cold temperatures. It offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance. Pentosin DOT 4 LV Brake Fluid is ideal for all modern vehicles with ESP and ABS. DOT 4 LV can be used in all vehicles that require DOT 4 fluid. High safety margin against vapor lock. Long-term resistance to absorbing and retaining water. Superior corrosion resistance. Low viscosity fluid provides excellent flow performance at low temperature.
Product Features:
See More
Product Features:
- Safety against vapor lock
- Provides superior corrosion resistance
- Highest DOT 4 performance levels and extremely low viscosity at cold temperatures.
ATP – Trans Fluid Additive (Part No.AT-202)
from
$14.99
Product Features:
See More
- Reduces heat & wear
- Eliminates TQ converter shudder & clutch pack chatter
- For all automatic transmissions & 4×4 transfer cases
Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz (Part No.AS263Y)
from
$10.49
Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Includes Stop Leak Additives to prevent and stop power steering system leaks.
- Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
- Conventional Formula – For use in all manufacturers
Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 12 oz (Part No.AS262)
from
$6.99
Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Includes Stop Leak Additives to prevent and stop power steering system leaks.
- Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
- Conventional Formula – For use in all manufacturers
Prestone – MAX Power Steering Fluid: European Vehicles, With Stop Leak, Enhances System Life, 100k miles, 12 oz (Part No.AS278)
from
$14.99
Prestone® MAX European Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
- MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
- For use in European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others
- 2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs
Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)
from
$9.99
Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
- For use in all manufacturers
- Conventional Formula – For use in all manufacturers
Popular 1980 BMW 320i Fluids and Chemicals Categories
1980 BMW 320i Fluids and Chemicals
You count on your 1980 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fluids and Chemicals. With 36 Fluids and Chemicals ranging in price from $6.99 to $96.99, you’re sure to find everything you need for your 1980 BMW 320i.
Brands matter. If you want to shop a specific Fluids and Chemicals brand, we stock 8 different brands like Prestone, ZEREX, and Fram. 1980 BMW 320i Fluids and Chemicals start as low as $6.99!
One of the best ways to find top quality OEM or aftermarket Fluids and Chemicals is by asking professionals. Short of that, you can shop with confidence thanks to our 1,673 extensive product reviews on 1980 BMW 320i Fluids and Chemicals. Some of the top-rated Fluids and Chemicals products we carry are Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. with 4.8 stars and Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz with 4.7 stars.
Did we mention you can order your Fluids and Chemicals from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fluids and Chemicals inventory for your 1980 BMW 320i below to get started!
Top-Rated Fluids and Chemicals Brands For Your 1980 BMW 320i
Trusted Fluids and Chemicals OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 BMW 320i running right for years to come. In our inventory you’ll find brands like Prestone, ZEREX, Fram, and even more.
Popular Castrol Fluids and Chemicals
You’ll find popular Castrol brand products across Transmission Fluids. All are waiting to get your 1980 BMW 320i back on the road. Some of the top-rated Castrol products in these categories are:
from
$12.29
(103)
Transmax ATF Full Synthetic Multi-Vehicle Automatic Transmission Fluid (1 Quart)
Automatic Transmission Fluids
from
$7.99
(8)
Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart)
Automatic Transmission Fluids
Top-Rated ZEREX Fluids and Chemicals
If ZEREX are what you’re looking for, our inventory holds plenty. We stock ZEREX brand Fluids and Chemicals for your 1980 BMW 320i, and some of our most reviewed ZEREX parts include:
from
$19.99
(464)
G05 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon
Engine Coolant and Antifreeze
from
$22.99
(464)
G05® Full Strength Concentrate Antifreeze / Coolant, 1 Gallon
Engine Coolant and Antifreeze
FAQs for 1980 BMW 320i Fluids and Chemicals
What are the most purchased Fluids and Chemicals for the 1980 BMW 320i?
Out of 36 Fluids and Chemicals for the 1980 BMW 320i, the most popular in our inventory are:
from
$14.99
This product is not rated
Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon
Engine Coolant and Antifreeze
from
$17.99
This product is not rated
Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon
Engine Coolant and Antifreeze
from
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
Automatic Transmission Fluids
What are the top-rated 1980 BMW 320i Fluids and Chemicals?
Top-rated Fluids and Chemicals for your 1980 BMW 320i based on customer reviews/ratings are:
from
$9.99
(111)
Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz.
“great stuff”
from
$10.49
(77)
Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz
“Just what I needed for the steering box”
