1979 Pontiac LeMans Steering and Chassis Parts
More 1979 Pontiac LeMans Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1979 Pontiac LeMans, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1979 Pontiac LeMans Steering and Chassis Parts
National – Bearings (Part No.DB-53313)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)
from
$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Driveworks – Tie Rod End (Part No.DW-ES681N)
from
$14.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Steering Gear Complete Rebuild Kit (Part No.7857)
from
$128.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Sway Bar Bushing (Part No.RP15885)
from
$21.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Ball Joint (Part No.RP10683)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Carquest Premium – Return Hose Assembly (Part No.35325)
from
$79.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Cardone – Power Steering Pump (Part No.20-140)
from
$98.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
National – Multi Purpose Seal (Part No.313842)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Help – Power Steering Caps (Part No.82581)
from
$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
MOOG – Stabilizer Bar Link Kit (Part No.K8266)
from
$12.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.8773S)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.7856)
from
$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Power Steering Pump Pulley (Part No.300-121)
from
$84.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Energy Suspension – Sway Bar End Link Kit (Part No.9.8118R)
from
$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
ACDelco – Idler Arm (Part No.M3020591753ACD)
from
$97.29
Idler Arm
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Rare Parts – Center Link (Part No.RP25804)
from
$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Forged steel
- Heat treated components
- Improves steering response
National – Multi Purpose Seal (Part No.351267)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Remanufactured Power Steering Gear Box (Part No.27-6531)
from
$208.99
The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
- 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
- All critical components are tested to ensure product reliability.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
- Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Carquest Premium – Pressure Hose Assembly (Part No.35266)
from
$24.29
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-94956B)
from
$201.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Driveworks – Tie Rod End (Part No.DW-ES2033RLT)
from
$27.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Popular 1979 Pontiac LeMans Steering and Chassis Parts Categories
1979 Pontiac LeMans Steering and Chassis Parts
You count on your 1979 Pontiac LeMans to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 114 Steering and Chassis Parts ranging in price from $2.99 to $509.99, you’re sure to find everything you need for your 1979 Pontiac LeMans.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Driveworks, Carquest Premium, and Imperial. 1979 Pontiac LeMans Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 7,663 extensive product reviews on 1979 Pontiac LeMans Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1979 Pontiac LeMans below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1979 Pontiac LeMans
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Pontiac LeMans running right for years to come. In our inventory you’ll find brands like Driveworks, Carquest Premium, Imperial, and even more.
Popular Lares Steering and Chassis Parts
You’ll find popular Lares brand products across Gear Boxes. All are waiting to get your 1979 Pontiac LeMans back on the road. Some of the top-rated Lares products in these categories are:
Top-Rated MOOG Steering and Chassis Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 1979 Pontiac LeMans, and some of our most reviewed MOOG parts include:
FAQs for 1979 Pontiac LeMans Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1979 Pontiac LeMans?
Out of 114 Steering and Chassis Parts for the 1979 Pontiac LeMans, the most popular in our inventory are:
What are the top-rated 1979 Pontiac LeMans Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1979 Pontiac LeMans based on customer reviews/ratings are:
