1976 Jeep CJ7 Performance Engines

More 1976 Jeep CJ7 Performance Engines

Find your specific 1976 Jeep CJ7 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1976 Jeep CJ7 Performance Engines

Omix – Timing Chain (Part No.17453.02)

Timing Chain

from

$20.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More
View Product

Omix – Timing Kit (Part No.17452.06)

Timing Kit

from

$88.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • 3 Piece Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More
View Product

Edelbrock – Performer-Plus Camshaft Kit for AMC 290-401 V8 (Part No.2132)

Performer-Plus Camshaft Kit for AMC 290-401 V8

from

$353.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched To Performer Intakes PN[2131/3731]
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1015)

Performance Cylinder Head Gasket

from

$44.49
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Fel-Pro® Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Not intended for use in emission controlled vehicles.
  • Steel wire rings for the greatest combustion seal strength.
See More
View Product

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1015-1)

Performance Cylinder Head Gasket

from

$58.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Fel-Pro® Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Copper wire rings to essentially eliminate head brinelling and bending.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Omix – Cylinder Head Gasket (Part No.17446.04)

Cylinder Head Gasket

from

$28.99
Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.

Product Features:
  • Composite
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More
View Product

Edelbrock – Sure Seat; Valve Spring (Part No.5932)

Sure Seat; Valve Spring

from

$89.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More
View Product

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Performer EGR AMC Intake Manifold

from

$484.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More
View Product

Edelbrock – Performer AMC; Intake Manifold (Part No.37311)

Performer AMC; Intake Manifold

from

$627.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More
View Product

Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

from

$424.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Not for Stock Motorcraft Spread Bore Carburetor
  • Two Center Bolt Holes are Offset
See More

(1 reviews)
View Product

Omix – Piston Ring Set (Part No.17430.23)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .060 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More
View Product

B & M – Torque Converter, Holeshot 2400 (Part No.10415)

Torque Converter, Holeshot 2400

from

$498.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More
View Product

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More
View Product

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More
View Product

B & M – Tork Master 2000 (Part No.20400)

Tork Master 2000

from

$266.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More
View Product

Edelbrock – Water Pump AMC Long Style 1973-Later (Part No.8832)

Water Pump AMC Long Style 1973-Later

from

$347.99
Edelbrock #8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.1875 in. Block To Hub Height
  • Satin Finish
See More
View Product

Omix – Water Pump (Part No.17104.16)

Water Pump

from

$182.99
Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:
  • OE Style
  • Direct Fit
  • High Quality
  • Efficient Cooling
  • Limited 5 Year Warranty
See More
View Product

Omix – Timing Cover Oil Seal (Part No.17449.50)

Timing Cover Oil Seal

from

$15.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal Outer Rubber Inner
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More
View Product

Omix – Thermostat Gasket (Part No.17117.03)

Thermostat Gasket

from

$3.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Highly Durable
  • Long Lasting
  • Limited 5 Year Warranty
See More
View Product

1976 Jeep CJ7 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1976 Jeep CJ7. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 19 different Performance Engines in our inventory ranging from $3.49 to $796.99. That means you can find the exact parts or products you need to keep that 1976 Jeep CJ7 running smoothly.

Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Jeep CJ7. Edelbrock, B & M, and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1976 Jeep CJ7, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1976 Jeep CJ7 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1976 Jeep CJ7 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Jeep CJ7 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your CJ7 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1976 Jeep CJ7, our most popular Edelbrock Performance Engines include:
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
from $424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds

FAQs for 1976 Jeep CJ7 Performance Engines

What are the most purchased Performance Engines for the 1976 Jeep CJ7?

Out of 19 Performance Engines for the 1976 Jeep CJ7, the most popular in our inventory are:
Tork Master 2000
from $266.99
This product is not rated
Tork Master 2000
Performance Torque Converters
Performer EGR AMC Intake Manifold
from $484.99
This product is not rated
Performer EGR AMC Intake Manifold
Performance Intake Manifolds
Cylinder Head Gasket
from $28.99
This product is not rated
Cylinder Head Gasket
Performance Engine Cylinder Head Gaskets

More Popular Parts for All Makes