1975 Ford F-350 Pickup Differentials

aFe Power’s new rear differential cover brings performance engineering to the protection of your axles differential. This differential cover is constructed out of durable die cast aluminum with reinforced ribs and wrinkle black powder coating for maximum strength and styling. This cover comes with all necessary hardware and includes an O-ring for a leak free seal. This cover has about a 5 quart lube capacity at the factory line; factory cover holds about 4 quarts. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a large magnetic drain and fill plug that captures loose particles for maximum rear-end protection. Pre-installed large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling.

Product Features:

• External Fins Transfer Heat To Atmosphere
• Internal Fins Absorb Heat From Lubricating Fluid
• Magnetic Fill Plug
• Magnetic Drain Plug

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

• Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

• Power Lok case bolt for Dana Spicer 60 and 70
• 7/16 x 14 thread
• 3.5″ long
• 9/16″ hex head

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

• Fits Dana Spicer 70U
• Included are carrier bearings and races, pinion bearings and races, pinion seal, oil baffles and slingers , marking compound and brush.

Product Features:

• Spider gear kit
• Fit Dana Spicer 70 and 80 open differential with 35 spline axles
• Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

Ford 10.25″ & 10.5″ carrier case, standard Open.

Product Features:

• Standard open carrier case
• Fits Ford 10.25″
• Does not include spider gears

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

• Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
• 0.225″ diameter
• 1.870″ long

Product Features:

• Outer slinger
• Fits Dana Spicer 80

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Product Features:

• Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
• For Trac Loc positraction applications only

Product Features:

• FRD 14BL 10.25 R/P 4.56 LATE MG 94-99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:

• Fits Dana Spicer 60
• Includes carrier bearings and races and carrier shim kit

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

• Carrier bearing puller
• Works with an impact gun to safely and easliy remove carrrier bearings
• Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Bearing race driver. No return.

Product Features:

• Bearing race driver
• Fits HM89410 race
• All steel construction

Product Features:

• KIT SHIM PINION

Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:

• Seal housing for Ford 10.25″ and 10.5″
• Includes o-rings

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Yukon Carbon Clutch kit with 14 Plates for 10.25″ and 10.5″ Ford posi, Eaton style.

Product Features:

• Clutch kit
• Fits Ford 10.25″ with Eaton positraction
• Carbon fiber clutches

Product Features:

• DANA-70 R/P 4.10 STD MG 72154-5X .625″ OFFSET

Product Features:

• 35 spline inner and outer axles
• Fits 1978-1979 Ford with Dana Spicer 60
• Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Product Features:

• PINION YOKE
• CAST:1310
• U-BOLT STYLE

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
• Required replacement – when servicing the differential
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
• Fits standard open differentials only

Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:

• Cross pin shaft
• Fits Dana Spicer 60 and 70
• Powr Lok positraction only

Product Features:

• MINI-INSTLTN KIT-DANA 70

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

• Cover bolt for Dana Spicer 60, 70 and 80
• 3/8″

Yukon Performance steel spool for Dana 60 with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

• Fits Chrysler Dana Spicer 60 with 30 spline axles
• 4.10 and down ratio only
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles