1996 Ford F-350 Pickup Differentials

Name: Differential Ring and Pinion
Brand: Spicer
SKU: 706033-3X
Price: 863.99 USD

Find your specific 1996 Ford F-350 Pickup original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1996 Ford F-350 Pickup Differentials

from

$863.99

All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.

from

$6.99

Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:

Ring gear bolt for Ford 10.25″ and 10.5″
1/2″ x 20 thread

from

$4.99

Product Features:

Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$28.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$278.99

Yukon 1541H replacement inner axle for Dana 60 with a length of 15.96 inches and with 35 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:

35 spline
15.96″ long
Fits Dana Spicer 60 in 1985-1988 Ford F350 and 1981-1993 Dodge 3/4 ton and 1 ton
Right hand inner
5-332X U-joint size

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$39.99

Replacement pinion seal for Dana 44HD, Dana 60 & Dana 70 .Yukon Mighty seal.

Product Features:

Pinion seal
Pinion seal
Fits Dana Spicer 44HD, 60, 70, 70U and 70HD

from

$213.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$263.99

Set-up carrier bearing kit (2 bearings, no races) for Dana 50. JLM104948. No return.

Product Features:

Set up bearing kit
Fits Dana Spicer 50
Easily slips on and off carrier journals to allow for easier carrier shim adjustment

from

$832.99

Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Clutch kit
Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
Smooth design
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$27.99

Replacment Pinion depth shims for Dana 80 (between pin head & bearing).

Product Features:

Pinion depth shims for Dana Spicer 80
Fits between pinion head and bearing

from

$7.99

Replacement side gear thrust washer for Spicer 50 .

Product Features:

Side gear thrust washer
Fits Dana Spicer 50

from

$41.99

Product Features:

Cross pin shaft
Fits Dana Spicer 50

from

$205.99

NO RETURN HM807044 set-up bearing (1 SINGLE bearing) F10.25.

Product Features:

Set up bearing
Fits HM807044 pinion bearing
Easily slips on and off pinion journal to allow for pinion depth adjustment

from

$1141.99

Differential

from

$23.99

Replacement pinion nut for Dana 80, 1 7/8″ socket.

Product Features:

Pinion nut for Dana Spicer 80
1 7/8″ socket

from

$78.99

Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:

Seal housing for Ford 10.25″ and 10.5″
Includes o-rings

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$177.99

Product Features:

Clutch kit
Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
Smooth design

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$47.99

Plug adapter for extra-large clamshell. No Return.

Product Features:

Plug adapter for Extra Large clamshell
Fits carrier bearing puller

from

$8.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$24.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$427.99

Product Features:

Fits Chrysler Dana Spicer 60 with 30 spline axles
4.56 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$1114.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit fits full floating applications only.

Product Features:

Fits Ford 10.25″ and 10.5″
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

Popular 1996 Ford F-350 Pickup Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Front Housing Cover Gaskets

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Disc Kits

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Maybe you’re in the middle of a full rebuild of that 1996 Ford F-350 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 438 different Differentials in our inventory ranging from $2.99 to $2,784.99. That means you can find the exact parts or products you need to keep that 1996 Ford F-350 Pickup running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Ford F-350 Pickup. National, Felpro, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1996 Ford F-350 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 368 reviews in this category, some of the top rated parts include Axle Housing Cover Gasket with 4.3 stars and DIFFERENTIAL GASKET with 3.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1996 Ford F-350 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1996 Ford F-350 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Ford F-350 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Front Differential Pinion Bearings and Differential Bearings categories, plus more. For a 1996 Ford F-350 Pickup, our most popular National Differentials include:

from $38.49

(2)

Bearings

Front Differential Pinion Bearings

from $22.99

(12)

Bearings

Differential Bearings

from $16.99

(6)

Bearings

Differential Bearings

Top 1996 Ford F-350 Pickup Differentials from National

National products are another trusted brand when it comes to Differentials for your 1996 Ford F-350 Pickup. Popular National parts include:

from $19.99

(17)

Multi Purpose Seal

Differential Pinion Seals

from $6.99

(6)

Bearings

Differential Bearings

from $42.99

(1)

Bearings

Differential Bearings

FAQs for 1996 Ford F-350 Pickup Differentials

What are the most purchased Differentials for the 1996 Ford F-350 Pickup?

Out of 438 Differentials for the 1996 Ford F-350 Pickup, the most popular in our inventory are:

from $9.49

(26)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $62.99

This product is not rated

Rear Differential Cover

Differential Covers

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

What are the top-rated 1996 Ford F-350 Pickup Differentials?

Top-rated Differentials for your 1996 Ford F-350 Pickup based on customer reviews/ratings are:

from $6.49

(10)

Axle Housing Cover Gasket

“fit perfectly and was easy to work with.no more leaking rear differential.”

from $8.29

(4)

DIFFERENTIAL GASKET

“Great Product”

from $13.79

(4)

Taper Bearing Set

“Worked great on my 1981 Chevy C20”

1996 Ford F-350 Pickup Differentials

More 1996 Ford F-350 Pickup Differentials

Essential 1996 Ford F-350 Pickup Differentials

Spicer – Differential Ring and Pinion (Part No.706033-3X)

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

National – Shaft Repair Sleeve (Part No.99225)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Yukon Gear – 1541H Replacement Inner Axle For Dana 60 & D61 – Ford Lh & Dodge Rh (Part No.21114)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Replacement Pinion Seal For Dana 44HD, Dana 60 & Dana 70 (Part No.30208)

Pro-King – Differential Internal Nest Kit (Part No.716A717)

Yukon Gear – Set Up Bearing (Part No.56038)

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55006)

Yukon Gear – Replacement Side Gear Thrust Washer For Spicer 50 (Part No.33438)

Yukon Gear – Replacement Cross Pin Shaft For Spicer 50, Standard Open (Part No.33440)

Yukon Gear – Set Up Bearing (Part No.56074)

Yukon Gear – Differential (Part No.26048)

Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Yukon Gear – Bearing Race Driver (Part No.56017)

National – Bearings (Part No.HM89411)

USA Standard Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.59017)

Yukon Gear – Dura Grip For Ford 10.25" & 10.5" (Part No.26031)

Popular 1996 Ford F-350 Pickup Differentials Categories