from

$83.29

MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Interstitial carbide improves wear resistance/running properties
Melonite QPQ coated reduces friction and initial wear
Proprietary formulated ductile iron.
Micro Polished Surface For Smooth Contact

from

$16.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
Distributor cap has aluminum terminals to match OE performance.
The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$181.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$129.99

For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [8] 90 Degree Boots/Terminal Ends
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$46.49

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$82.99

8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:

PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.

from

$6.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$7.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$43.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High temperature enameled wires were specified for better insulation and performance
With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$28.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$65.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$46.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$48.49

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$7.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$432.99

Ignition Conversion Kit

from

$206.99

The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the en

Product Features:

PerTronix 9FO-181 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl
Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.

from

$538.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$593.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Absolutely The Most Accurate Way To Trigger The Ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$76.99

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

12 Volt Coil
Oil-Filled Design
Arch Resistant Alkyd Top
Designed To Deliver Optimum Performance

from

$21.05

BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
High temperature enameled wires were specified for better insulation and performance
The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$143.99

For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [8] 90 Degree Boots/Terminal Ends
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$9.79

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$9.99

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion

from

$494.99

MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Product Features:

Maintenance-free magnetic pickup and advance assembly
Same height and width as PN[8584]
Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range
Polished steel shaft is QPQ coated and guided by a sealed ball bearing and extra long sintered bushing

from

$379.99

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

PerTronix D130801 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$72.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

1975 Ford Elite Ignition and Tune-Up Products

More 1975 Ford Elite Ignition and Tune-Up Products Categories

Essential 1975 Ford Elite Ignition and Tune-Up Products

MSD Ignition – Distributor Gear; Ford 351C; 460; Bronze (Part No.8581)

Carquest – Distributor Cap (Part No.C154)

MSD Ignition – Wire Set; Super Conductor; Ford 351C-460 with HEI Cap (Part No.35389)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; HEI Cap (Part No.31189)

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8105)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

Carquest – Distributor Rotor (Part No.D198)

Carquest Premium – Ignition Coil Connector (Part No.PTC1111)

Carquest – Distributor Ignition Pickup (Part No.ME12)

Carquest Premium – Ignition Module (Part No.CBG1074)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1054)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1038)

Carquest Premium – Distributor Reluctor (Part No.REA1001)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1707)

PerTronix – 9FO-181 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl (Part No.9FO-181)

MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)

MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

Carquest – Ignition Coil (Part No.E71)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8184)

MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle/HEI; Universal (Part No.31183)

ACDelco – Double Platinum Spark Plug (Part No.41-803)

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP26)

MSD Ignition – Distributor; Ford 351W; with Hydraulic Roller Steel Gear (Part No.85840)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130801)

Carquest Premium – Distributor T2875A: 100% New, With Cap and Rotor (Part No.T2875A)

Popular 1975 Ford Elite Ignition and Tune-Up Products Categories

1975 Ford Elite Ignition and Tune-Up Products

Top-Rated Ignition and Tune-Up Products Brands For Your 1975 Ford Elite

Popular Champion Ignition and Tune-Up Products

Top-Rated Ignition and Tune-Up Products

FAQs for 1975 Ford Elite Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1975 Ford Elite?

What are the top-rated 1975 Ford Elite Ignition and Tune-Up Products?