from

$553.99

High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:

Built As Matched Assembly
Exceptional Performance
Exceptional Durability
Long Term Dependability

from

$26.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$299.99

Product Features:

Hi-Ram; Intake Manifold Runner Section

from

$44.99

Maximum electrical conductivity. Impact resistant. High dialectic strength. Prevents damage.

Product Features:

Maximum Electrical Conductivity
Impact Resistant
High Dielectric Strength
Prevents Damage

from

$512.99

The Hurst Competition Plus, the industry standard for over 30 years, used in dedicated applications to assure a custom fit to a wide variety of vehicles having factory consoles without any modifications.

Product Features:

High Ratio Pivot Mechanism
Adjustable Bias Spring Loads
Adjustable Stops
Chrome Plated Steel Bolt On Stick
Easy Installation

from

$25.99

The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.

Product Features:

These are have a zinc dichromate finish
Tall hex head bolt to prevent slippage
Extra thick parallel ground washer
Washers provides more accurate and uniform torque
Grade 8 alloy steel

from

$587.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$32.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$101.99

Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:

Replacement Distributor Gear

from

$25.99

Thick, molded rubber with steel carrier. Manufactured from high-density cork and rubber blend gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage. Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Available in standard or extra thick to provide additional valve train to cover clearance. For OE replacement, high performance street, drag race and oval track.

Product Features:

Features nitrile rubber material for long life
Molded rubber gaskets are reusable
Ideal for engine requiring valve lash maintenance

from

$104.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$16.99

Dress up your engine. These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:

Heavy gauge steel
Polished to high luster
Chrome plated for lasting beauty

from

$23.79

Spectre’s Chevrolet late model water neck offers the normal angled water neck and a 1/2 inch NPT threaded hole for a by-pass hose. This water neck has a chrome plated finish for a lasting look great and includes the bolts.

Product Features:

Fits Chevy engines
Includes a 1/2 inch NPT threaded hole for by-pass hose
Includes bolts
Chrome plated
Easy to install
O-ring/gasket not included

from

$115.99

These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.

Product Features:

300+Race- 8.8mm Black
For Race Engine Configurations
Stainless Steel Spark Plug Terminals
Suppression of EMI/RFI
600 Degree Double Silicone Construction
Spiral Wound Copper/Nickel Alloy
Fully Reactive Ferrite Material
150 Ohms Resistance

from

$157.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$498.99

The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Electric Choke Installed from Factory
Smooth Secondary Transition
Includes Only Timed Vacuum Port
Includes EGR ; Fuel Vapor Outlet

from

$12.99

This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.

Product Features:

Small block Chevrolet, use for mounting mechanical fuel pumps
Includes mounting plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$67.99

The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.

Product Features:

Bullet tip design
Aid alignment and installation
Grade 5 studs w/ black finish
Zinc plated self-locking nuts
Assures positive gasket seal
The professionals choice

from

$25.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$14.99

The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:

2 in. adjustable range
Includes necessary hardware
Chrome plated
Individually packaged

from

$57.99

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:

Designed for 1958-1986 Chevrolet Small Block 265-400 engines
Baffled for breather system compatibility
Sold in pairs
Triple chrome-plated steel construction
Stock height
Features OEM style sealing edge

from

$15.99

These chromed timing tab finish your engine’s a completely customized look.

Product Features:

Fits Chevy small block
Adjusts with screwdriver
Chrome plated steel and red anodized

from

$16.99

Rotor assembly for a GM HEI late model with external coil cap Chevy V8 cap-a-dapt. The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Resist Carbon Tracking
Max Voltage Transfer
Molded From Insulated Material

from

$14.99

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$266.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$81.99

Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:

Engine pulleys come in a chrome or polished finish
Designed for OE engine setup
Looks great
Easy to install

from

$59.99

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

They are zinc dichromate plated steel
They have black oxide coated set screws
Keeps rocker arms positively locked

from

$62.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces