1974 Toyota Pickup Filters and PCVs
More 1974 Toyota Pickup Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 1974 Toyota Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 1974 Toyota Pickup Filters and PCVs
Carquest Premium – Engine Air Filter: Removes up to 99% of Dirt & Debris (Part No.88162)
from
$24.79
Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.
See More
Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R88162)
from
$16.79
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More
Carquest Premium – Air Filter (Part No.88165)
from
$8.29
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
Fram – Extra Guard Rigid Panel Engine Air Filter: Premium, Engineered for 2x Engine Protection (Part No.CA6690)
from
$14.39
FRAM Extra Guard® engine air filters are engineered to protect your engine from harmful contaminants. Engine air filters are the first line of defense for your engine. To prevent engine wear, FRAM recommends changing your air filter every 12 months. Replacing an air filter with FRAM Extra Guard can help improve horsepower, acceleration, and engine performance.
Product Features:
See More
Product Features:
- Keep your engine running smoothly by preventing damaging particles from entering your vehicle’s engine
- Ensures maximum airflow to prevent engine wear
- Installs quickly in as little as 5 minutes
- Protects up to 12 months or 12,000 miles
Purolator – Fuel Filter (Part No.F44710)
from
$35.99
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Beck/Arnley – Fuel Filter (Part No.043-0821)
from
$9.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with top grade pleated or rolled materials
- Designed to work with the OE bracket on vehicle if applicable
- Quality construction for durability
- Application specific for this vehicle
Carquest Premium – Fuel Spin-On Filters for Peak Engine Efficiency in Modern Fuel Injection Systems (Part No.86386)
from
$20.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Spin on fuel filter with application specific media to meet or exceed OE performance, and emission requirements
- Metal ends cap, rigid center tube, strength can, and positive sealing O-ring
- Made in USA
Purolator – Fuel Filter (Part No.F21124)
from
$5.49
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Fram – Internal Transmission Cartridge (Part No.FT1105A)
from
$27.49
Internal Transmission Cartridge
ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)
from
$42.99
AT IN-LINE FLTR 5/16
Pro-King – Automatic Transmission Filter Kit (Part No.FK-176)
from
$21.49
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More
Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85945)
from
$24.99
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.
Product Features:
See More
Product Features:
- Guaranteed OE quality form, fit and function
- Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
- Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
Pro-King – Automatic Transmission Filter Kit (Part No.FK-196)
from
$20.49
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More
ATP – AT FLTR 5/16 D BARB (Part No.JX-151)
from
$42.99
AT FLTR 5/16 D BARB
Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85884)
from
$20.99
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.
Product Features:
See More
Product Features:
- Guaranteed OE quality form, fit and function
- Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
- Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
Pro-King – Automatic Transmission Filter Kit (Part No.FK-163)
from
$12.69
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More
Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-1A)
from
$14.99
The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
Product Features:
See More
Product Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
FRAM – Premium Spin-on Oil Filter (Part No.TG3614)
from
$6.99
FRAM Tough Guard Oil Filters use synthetic media for enhanced engine protection and to maintain a 99% dirt-trapping efficiency rating.
Product Features:
See More
Product Features:
- Silicone anti-drainback valve holds a reserve of oil in the filter to help protect the engine during start-ups
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.PS-2005)
from
$8.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Carquest Premium – PCV Valve Grommet (Part No.PCA1192)
from
$4.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – PCV Valve Grommet – 0.427 In. ID – 1.159 In. OD – 0.624 In. Thickness (Part No.42057)
from
$5.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
- Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – PCV Grommet (Part No.B2140751306DOR)
from
$6.20
Provide an airtight seal for the PCV valve with Dorman’s resilient PCV Grommet. Made from oil-resistant rubber, the grommet is durable against severe heat and fluctuating under hood temperatures. Its bevelled design helps ensure a secure fit. It is excellent for the repair of emission and vacuum systems on cars, trucks and tractors.
Product Features:
See More
Product Features:
- Leak-resistant for maximum performance
- Crack-resistant for long-lasting use
- Easy to install – just press it into place
- No special tools required for installation
Ishino – PCV Valve Grommet (Part No.B2140137582ISH)
from
$2.75
PCV Valve Grommet
Imperial – Remote Mount Filter Kit – Universal (Part No.240291)
from
$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.
Product Features:
See More
Product Features:
- Remote mount filter kit
- For use when relocation of the oil filter is necessary
- Comes with all necessary hardware except hoses
Popular 1974 Toyota Pickup Filters and PCVs Categories
1974 Toyota Pickup Filters and PCVs
You count on your 1974 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 11 Filters and PCVs ranging in price from $5.99 to $95.99, you’re sure to find everything you need for your 1974 Toyota Pickup.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 5 different brands like K&N, ATP, and Dorman. 1974 Toyota Pickup Filters and PCVs start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 48 extensive product reviews on 1974 Toyota Pickup Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are Remote Mount Filter Kit – Universal with 2.8 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1974 Toyota Pickup below to get started!
Top-Rated Filters and PCVs Brands For Your 1974 Toyota Pickup
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Toyota Pickup running right for years to come. In our inventory you’ll find brands like K&N, ATP, Dorman, and even more.
Popular K&N Filters and PCVs
You’ll find popular K&N brand products across Oil Filters. All are waiting to get your 1974 Toyota Pickup back on the road. Some of the top-rated K&N products in these categories are:
from
$17.99
(42)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
from
$8.99
(1)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
FAQs for 1974 Toyota Pickup Filters and PCVs
What are the most purchased Filters and PCVs for the 1974 Toyota Pickup?
Out of 11 Filters and PCVs for the 1974 Toyota Pickup, the most popular in our inventory are:
from
$5.99
(1)
PCV Valve Grommet – 0.427 In. ID – 1.159 In. OD – 0.624 In. Thickness
PCV Valve Grommets
What are the top-rated 1974 Toyota Pickup Filters and PCVs?
Top-rated Filters and PCVs for your 1974 Toyota Pickup based on customer reviews/ratings are:
from
$95.99
(4)
Remote Mount Filter Kit – Universal
“I wanted to standardize my vehicle oil filter purchases and installing this unit on my 4 vehicles allows me to do this. I only purchase the Fram Ultra”
