1971 Oldsmobile Toronado Performance and Racing Products

Essential 1971 Oldsmobile Toronado Performance and Racing Products

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

from

$463.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Mr. Gasket – EngFullGsktSet (Part No.7140)

EngFullGsktSet

from

$80.29
Kits include all gaskets needed for a complete engine overhaul. Cylinder head, intake, exhaust, valve cover and oil pan. Distributor gasket (where applicable), timing cover, fuel pump, thermostat, water pump, and rear main seal. For OE replacement, high performance street, drag race and oval track.

Product Features:
  • Engine Rebuilder
  • Stock/Non-High Performance Engines
  • Includes All Gaskets/Seals
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1439)

Exhaust Manifold Gasket Set

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

Lower Intake Manifold Gasket Set: 3 Piece Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-223-4)

Xtreme Energy 224/230 Hydraulic Flat Cam for Oldsmobile 260-455

from

$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5810G)

Ultra Seal: Head Gasket

from

$59.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.250 inch, Compressed thickness 0.038 inch

Product Features:
  • Five layer (graphite core/perforated steel outer layers) composite construction
  • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
  • Provides excellent stability, compressibility and high temperature endurance
  • Coated with high temperature silicone to ensure sealing of engine fluids
  • Will not brinell (indent) aluminum cylinder heads
  • For high performance street, drag race and oval track use
  • Compatible w/High Octane Fuel
  • Compatible With Exotic Fuel
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Oil Pan Bolt Kit

from

$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More

Spectre – Water Neck; Olds (Part No.4733)

Water Neck; Olds

from

$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:
  • Fits Oldsmobile 330, 350, 425 and 455 engines
  • Chrome plated
  • Bolts included
  • Designed for OEM fit
  • Easy to install
  • O-ring/gasket not included
See More

Accel – Contact Set Hp 32 Oz (Part No.110128)

Contact Set Hp 32 Oz

from

$54.39
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

B & M – Tork Master 2400 (Part No.20404)

Tork Master 2400

from

$339.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

GM 1984-95 Remote Supercoil

from

$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP DR-37
  • MSD 8226
  • Resist Corrosion
  • W/New Mounting Hardware
See More

Accel – Points Eliminator Kit (Part No.2010)

Points Eliminator Kit

from

$105.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • More Accurate Ignition Timing
  • Improves Performance And Fuel Economy
  • Provides More Accurate Ignition Timing
  • Easy To Install w/Hand Tools
  • Reduced Maintenance
  • Thermal Clad Based Surface Mount Construction
  • Utilizes Specialized Electronic Circuitry
  • Ignition Timing Is Stable From 1 To 10000rpm
See More

Mr. Gasket – Alternator (Part No.5123)

Alternator

from

$363.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability.

Product Features:
  • Fits Most 1966-’72 GM Vehicles
  • Bolt Spacing 6.6″
  • 80 Amps
  • GM 10DN Style Alternator
  • Chrome Plated Finish
  • includes V-Belt Pulley – 1-Groove
  • Use w/ OEM Style Regulator
See More

Mr. Gasket – Alternator (Part No.5122)

Alternator

from

$288.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability. This 10SI style 80 amp alternator can be used as an original equipment replacement OR as a 1-wire alternator.

Product Features:
  • Fits Most 1973-1983 GM Vehicles
  • Bolt Spacing 6.6″
  • 80 Amps
  • GM 10SI Style Alternator
  • Chrome Plated Finish
  • 1-Groove V-belt pulley – included
  • Internal Regulator
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Hays – Power Train (Part No.85-112)

Power Train

from

$665.99
Matched assembly for maximum reliability. An excellent choice for high performance street applications.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
  • Designed for Street And Street Strip Applications
See More

Hays – Power Train (Part No.85-114)

Power Train

from

$653.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7813)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$97.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2022)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$54.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$89.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:
  • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR0136)

Spectre Replacement Air Filter

from

$31.99
This Spectre OEM replacement air filter is an easy to install performance option for multiple Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac applications that use a 14 inch by 3 inch round air filter. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air cleaner housing seal for great engine protection.

Product Features:
  • Replacement for 14 inch by 3 inch round air filter
  • Fits perfectly in your vehicle’s air box as a replacement for your factory air filter
  • Engineered for increased flow and greater performance
  • Fits select Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac models
  • Factory pre-oiled and ready to use
  • Simple installation
See More

1971 Oldsmobile Toronado Performance and Racing Products

You count on your 1971 Oldsmobile Toronado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 49 Performance and Racing Products ranging in price from $10.99 to $825.99, you’re sure to find everything you need for your 1971 Oldsmobile Toronado.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 12 different brands like Accel, Mr. Gasket, and Edelbrock. 1971 Oldsmobile Toronado Performance and Racing Products start as low as $10.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 175 extensive product reviews on 1971 Oldsmobile Toronado Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration with 4.9 stars and Unilite Ignition Module with 5.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1971 Oldsmobile Toronado below to get started!

Top-Rated Performance and Racing Products Brands For Your 1971 Oldsmobile Toronado

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Oldsmobile Toronado running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, Edelbrock, and even more.

Popular B & M Performance and Racing Products

You’ll find popular B & M brand products across Performance Engines. All are waiting to get your 1971 Oldsmobile Toronado back on the road. Some of the top-rated B & M products in these categories are:
Tork Master 2400
from $339.99
(1)
Tork Master 2400
Performance Torque Converters

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1971 Oldsmobile Toronado, and some of our most reviewed Edelbrock parts include:

FAQs for 1971 Oldsmobile Toronado Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1971 Oldsmobile Toronado?

Out of 49 Performance and Racing Products for the 1971 Oldsmobile Toronado, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1971 Oldsmobile Toronado Performance and Racing Products?

Top-rated Performance and Racing Products for your 1971 Oldsmobile Toronado based on customer reviews/ratings are:
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
from $89.99
(14)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“I just installed a new crate 350 in my 1956 Bel Air. I’ve used K&N’s before and I’m looking forward to improved performance and long use with this fi”
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Mallory Kit: Unil Conv: Delco: V8
from $134.99
(1)
Mallory Kit: Unil Conv: Delco: V8
“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”