1970 Jeep J-2600 Performance Engines

Essential 1970 Jeep J-2600 Performance Engines

Omix – Engine Valve Cover Gasket (Part No.17447.02)

Engine Valve Cover Gasket

from

$13.29
Is your Jeep’s valve cover gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Cork
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.08)

Timing Chain

from

$39.49
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Camshaft Kit (Part No.17420.01)

Camshaft Kit

from

$359.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Includes Cam Shaft; Lube And Lifters
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Performer-Plus Camshaft Kit for AMC 290-401 V8 (Part No.2132)

Performer-Plus Camshaft Kit for AMC 290-401 V8

from

$353.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched To Performer Intakes PN[2131/3731]
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Omix – Engine Gasket Set (Part No.17442.04)

Engine Gasket Set

from

$76.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Lower Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Performer EGR AMC Intake Manifold

from

$484.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

from

$424.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Not for Stock Motorcraft Spread Bore Carburetor
  • Two Center Bolt Holes are Offset
See More

Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

RPM Air-Gap AMC 304/360/401 Intake Manifold

from

$504.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
  • Not for Exhaust-Heat Chokes – No Exhaust Crossover
See More

Omix – Piston Ring Set (Part No.17430.23)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .060 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.28)

Piston Ring Set

from

$145.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.21)

Piston Ring Set

from

$111.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .030 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Omix – Oil Pan Gasket (Part No.17437.07)

Oil Pan Gasket

from

$18.29
Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Oil Pan Gasket (Part No.17439.06)

Oil Pan Gasket

from

$56.99
Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

1970 Jeep J-2600 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1970 Jeep J-2600. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 12 different Performance Engines in our inventory ranging from $13.29 to $504.99. That means you can find the exact parts or products you need to keep that 1970 Jeep J-2600 running smoothly.

Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1970 Jeep J-2600. Mr. Gasket, Edelbrock, and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1970 Jeep J-2600, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1970 Jeep J-2600 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1970 Jeep J-2600 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1970 Jeep J-2600 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your J-2600 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1970 Jeep J-2600, our most popular Edelbrock Performance Engines include:
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
from $424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds

Top 1970 Jeep J-2600 Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1970 Jeep J-2600. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

FAQs for 1970 Jeep J-2600 Performance Engines

What are the most purchased Performance Engines for the 1970 Jeep J-2600?

Out of 12 Performance Engines for the 1970 Jeep J-2600, the most popular in our inventory are:
High Performance Thermostat
from $27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
Oil Pan Gasket
from $56.99
(1)
Oil Pan Gasket
Performance Engine Oil Pan Gaskets
Performer EGR AMC Intake Manifold
from $484.99
This product is not rated
Performer EGR AMC Intake Manifold
Performance Intake Manifolds