1969 Chevrolet C10 Suburban Steering and Chassis Parts

Essential 1969 Chevrolet C10 Suburban Steering and Chassis Parts

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Cardone – Power Steering Pump (Part No.20-151)

Power Steering Pump

from

$93.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.854)

Remanufactured Manual Steering Gear Box

from

$244.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Dorman – Suspension Control Arm (Part No.520-181)

Suspension Control Arm

from

$147.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Powercraft – Pump Seal Kit (Part No.8755)

Pump Seal Kit

from

$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Caster/Camber Shim (Part No.K100190)

Caster/Camber Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

MOOG – Ball Joint (Part No.K6023)

Ball Joint

from

$46.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)

Steering Gear Input Shaft Seal Kit

from

$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Track Bar Bushing (Part No.RP16992)

Track Bar Bushing

from

$43.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • No Squeak
See More

Dorman – Help – Steering Coupling Assembly (Part No.31015)

Steering Coupling Assembly

from

$66.99
This steering coupling assembly is designed to match the original components required to restore proper function of the steering coupling on specified vehicles, and is engineered from durable materials for reliable performance.

Product Features:
  • Direct replacement – this steering coupling assembly is designed to match the original components required to restore proper function of the steering coupling on specified vehicles
  • Restores functionality – reliable replacement for an original assembly damaged by collision or failed due to fatigue
  • Durable construction – this assembly is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Lares – New Steering Coupling Assembly (Part No.201)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Driveworks – Tie Rod End (Part No.DW-ES409RT)

Tie Rod End

from

$14.79
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Tie Rod End Adjusting Sleeve

from

$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

Carquest Premium – SWAY BAR BUSHING (Part No.224-74001)

SWAY BAR BUSHING

from

$16.29
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Powercraft – Steering Gear Major Seal Kit (Part No.7859)

Steering Gear Major Seal Kit

from

$52.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Tie Rod End (Part No.RP25455)

Tie Rod End

from

$30.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

National – Multi Purpose Seal (Part No.6835S)

Multi Purpose Seal

from

$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.480821)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Return Hose Assembly (Part No.36135)

Return Hose Assembly

from

$32.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Driveworks – Steering Pitman Arm (Part No.DW-K6131)

Steering Pitman Arm

from

$34.49
Driveworks pitman arms are made to meet or exceed OE specifications and help to restore correct steering and prevent tire wear. Driveworks chassis parts promote improved steering response and durability.
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5177G)

Sway Bar Bushing Set

from

$49.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.7856)

Steering Gear Lower Pitman Shaft Seal Kit

from

$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35523)

Pressure Hose Assembly

from

$29.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

1969 Chevrolet C10 Suburban Steering and Chassis Parts

You count on your 1969 Chevrolet C10 Suburban to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 97 Steering and Chassis Parts ranging in price from $2.99 to $825.99, you’re sure to find everything you need for your 1969 Chevrolet C10 Suburban.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Imperial, Carquest Premium, and Driveworks. 1969 Chevrolet C10 Suburban Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 3,834 extensive product reviews on 1969 Chevrolet C10 Suburban Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1969 Chevrolet C10 Suburban below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1969 Chevrolet C10 Suburban

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Chevrolet C10 Suburban running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Driveworks, and even more.

Popular Driveworks Steering and Chassis Parts

You’ll find popular Driveworks brand products across Tie Rods and Steering Shafts. All are waiting to get your 1969 Chevrolet C10 Suburban back on the road. Some of the top-rated Driveworks products in these categories are:
Steering Tie Rod End
from $11.49
(1)
Steering Tie Rod End
Center Tie Rod Ends
Taper Bearing Set
from $8.99
(47)
Taper Bearing Set
Worm Shaft Bearings
Sway Bar Bushing
from $7.49
(2)
Sway Bar Bushing
Sway Bar Bushings

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1969 Chevrolet C10 Suburban, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1969 Chevrolet C10 Suburban Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1969 Chevrolet C10 Suburban?

Out of 97 Steering and Chassis Parts for the 1969 Chevrolet C10 Suburban, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated 1969 Chevrolet C10 Suburban Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1969 Chevrolet C10 Suburban based on customer reviews/ratings are:
Bearings
from $15.99
(38)
Bearings
“1976 Cutlass. Seem like a good bearing”
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
New Steering Coupling Assembly
from $52.99
(16)
New Steering Coupling Assembly
“Very high quality item. Perfect replacement and fit. Easy to install. Do NOT buy the $10 one. Pay the [$] and you’ll see the high quality fittings and”