1966 Plymouth Fury Steering and Chassis Parts
More 1966 Plymouth Fury Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1966 Plymouth Fury, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1966 Plymouth Fury Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.20-140)
from
$98.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
MOOG – Tie Rod End (Part No.ES355RL)
from
$47.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Lares – Remanufactured Manual Steering Gear Box (Part No.1030)
from
$605.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
MOOG – Caster/Camber Adjusting Kit (Part No.K8243A)
from
$36.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Energy Suspension – Sway Bar Bushing Set (Part No.5.5128G)
from
$19.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
MOOG – Idler Arm (Part No.K7014)
from
$70.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Metro Mould – Steering Column Shaft Seal (Part No.SC 63)
from
$25.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Lower Steering Column Seal. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Powercraft – Steering Gear Control Valve Seal Kit (Part No.8518)
from
$16.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.8516)
from
$27.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Lares – New Steering Coupling Assembly (Part No.201)
from
$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Carquest Premium – Pressure Hose Assembly (Part No.35638)
from
$80.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Idler Arm Bushing (Part No.RP15318)
from
$61.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Improves steering response
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8553)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.7897)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Complete Rebuild Kit (Part No.7900)
from
$72.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Ball Joint (Part No.DW-K7025)
from
$33.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Powercraft – Steering Gear Major Seal Kit (Part No.7895)
from
$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8538)
from
$157.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – 5/8 in I.D. Reservoir Hose (Sold by the foot) (Part No.34998)
from
$11.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Rated at 275 Deg. F
- Inside Diameter: 5/8″
- Shape: Straight
- Outside Diameter: 0.91 in
- Priced and sold by the foot. See Store for details.
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Metro Mould – Torque Arm Bushing (Part No.XB 80)
from
$14.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Axle Pinion Snubber. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.6859S)
from
$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Power Steering or Hydraulic Element (Part No.85653)
from
$21.89
CARQUEST HD hydraulic filters maintain optimal system cleanliness levels and are essential to ensuring reliability and reducing maintenance costs while meeting OE recommended service intervals.
Product Features:
See More
Product Features:
- Conventional cartridge hydraulic filter
- Made in USA
Driveworks – Suspension Ball Joint (Part No.DW-K781)
from
$34.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More
Rare Parts – Self-Locking Nut (Part No.RP16538)
from
$3.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Retains bushings
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Popular 1966 Plymouth Fury Steering and Chassis Parts Categories
1966 Plymouth Fury Steering and Chassis Parts
You count on your 1966 Plymouth Fury to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 57 Steering and Chassis Parts ranging in price from $3.79 to $625.99, you’re sure to find everything you need for your 1966 Plymouth Fury.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Driveworks, and Cardone. 1966 Plymouth Fury Steering and Chassis Parts start as low as $3.79!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 8,631 extensive product reviews on 1966 Plymouth Fury Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and New Steering Coupling Assembly with 2.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Plymouth Fury below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1966 Plymouth Fury
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Plymouth Fury running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Cardone, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1966 Plymouth Fury back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1966 Plymouth Fury, and some of our most reviewed Imperial parts include:
FAQs for 1966 Plymouth Fury Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1966 Plymouth Fury?
Out of 57 Steering and Chassis Parts for the 1966 Plymouth Fury, the most popular in our inventory are:
What are the top-rated 1966 Plymouth Fury Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1966 Plymouth Fury based on customer reviews/ratings are:
from
$52.99
(13)
New Steering Coupling Assembly
“This unit fit my 1970 Camaro SS 396 manual steering box perfectly. I had to spread the opening a little to get it on but the splines were in great sha”
from
$52.99
(8)
New Steering Coupling Assembly
“Again in my nova fit perfect. The engine was out so the install was a lot easier. Tighten up my steering.”
