1966 Ford F-250 Pickup Drivetrains
More 1966 Ford F-250 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Ford F-250 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Ford F-250 Pickup Drivetrains
Yukon Gear – Spindle Nut For Dana 30 & Dana 44, .372" Thick (Part No.33474)
from
$24.99
Spindle nut for Dana 30 & Dana 44, .372″ thick. This replaces Spicer part number 21588X.
Product Features:
See More
Product Features:
- Spindle nut for Dana Spicer 30 and 44
- 0.372″ thick
Yukon Gear – (4) Full Circle Snap Rings, Fits Dana 60 733X U-Joint With Aftermarket Axle (Part No.32085)
from
$18.99
(4) Full Circle snap rings, fits Dana 60 733X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 60
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Ring and Pinion Kit (Part No.24285)
from
$419.99
Ring and Pinion Kit
Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)
from
$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.
Product Features:
See More
Product Features:
- Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)
from
$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 ratio and up only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
National – Bearings (Part No.1210-L)
from
$89.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-362-A)
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Zip Locker Install Kit (Part No.34026)
from
$249.99
Product Features:
See More
- Installation kit
- Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
Yukon Gear – Differential (Part No.29101)
from
$271.99
Differential
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Driveworks – Tapered Roller Bearing (Part No.S-HM-803149)
Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Yukon Gear – Seal Housing For Dana 44, Zip Locker, With O-Rings (Part No.34013)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford (Part No.33241)
from
$11.99
Cross pin bolt with 5/16 x 18 thread for 10.25″ Ford.
Product Features:
See More
Product Features:
- Cross pin bolt for Ford 9.75″ and 10.25″ with c-clip axles
- 5/16″ x 18 thread
Milemarker – MileMarker Street Master; Manual Hub (Part No.302)
from
$196.99
Black nylon reinforced fiberglass dial. Limited lifetime warranty. 19 spline, internal bolts. Chrome.
Product Features:
See More
Product Features:
- Black Nylon Reinforced Fiberglass Dial
- Limited Lifetime Warranty
Rugged Ridge – Locking Hub (Part No.15001.08)
from
$237.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)
from
$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.
Product Features:
See More
Product Features:
- Ring gear bolt sleeve
- Adapts 7/16″ to 3/8″
Yukon Gear – Replacement Cross Pin Shaft For Dana 44, Standard Open (Part No.33318)
from
$16.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 44
- Fits standard open differentials only
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Popular 1966 Ford F-250 Pickup Drivetrains Categories
1966 Ford F-250 Pickup Drivetrains
You count on your 1966 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 335 Drivetrains ranging in price from $3.29 to $1,487.99, you’re sure to find everything you need for your 1966 Ford F-250 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, Spicer, and Driveworks. 1966 Ford F-250 Pickup Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,906 extensive product reviews on 1966 Ford F-250 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Multi Purpose Bearing with 3.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Ford F-250 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1966 Ford F-250 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Moog, Spicer, Driveworks, and even more.
Popular MOOG Driveline Products Drivetrains
You’ll find popular MOOG Driveline Products brand products across Universal Joints. All are waiting to get your 1966 Ford F-250 Pickup back on the road. Some of the top-rated MOOG Driveline Products products in these categories are:
FAQs for 1966 Ford F-250 Pickup Drivetrains
What are the most purchased Drivetrains for the 1966 Ford F-250 Pickup?
Out of 335 Drivetrains for the 1966 Ford F-250 Pickup, the most popular in our inventory are:
What are the top-rated 1966 Ford F-250 Pickup Drivetrains?
Top-rated Drivetrains for your 1966 Ford F-250 Pickup based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“Attractive, affordable option. Easy installation, works well so far.”
