1964 Oldsmobile Vista Cruiser Transmission Parts
More 1964 Oldsmobile Vista Cruiser Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1964 Oldsmobile Vista Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1964 Oldsmobile Vista Cruiser Transmission Parts
ATP – AT SEL SHAFT SEAL (Part No.SO-19)
from
$7.99
AT SEL SHAFT SEAL
National – Bearings (Part No.25520)
from
$8.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – AT OIL PUMP SEAL (Part No.CO-4)
from
$14.99
AT OIL PUMP SEAL
ACDelco – Neutral Safety Switch (Part No.D2217C)
from
$39.99
ACDelco Professional Neutral Safety Switch is a high quality aftermarket replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This premium aftermarket switch is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
National – Multi Purpose Seal (Part No.240735)
from
$5.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal Kit (Part No.S-5200)
from
$6.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Manual Transmission Gasket Set (Part No.TS 6238)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8691)
from
$30.19
Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
National – Multi Purpose Seal (Part No.8460N)
from
$13.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Taper Bearing Cone (Part No.S-LM-501349)
from
$10.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT OIL PUMP ORING (Part No.SO-21)
from
$8.99
AT OIL PUMP ORING
ATP – AT FRT PUMP BUSHING (Part No.CB-30)
from
$11.99
AT FRT PUMP BUSHING
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ATP – AT EXT HOUSING SEAL (Part No.HO-8)
from
$11.99
AT EXT HOUSING SEAL
Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)
ATP – AT CLUTCH PLATE (Part No.JC-50)
from
$8.99
AT CLUTCH PLATE
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Oil Seal (Part No.S-9449)
from
$1.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
National – Bearings (Part No.25584)
from
$29.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – AT MODULATOR VALVE (Part No.JX-66)
from
$17.99
AT MODULATOR VALVE
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)
from
$33.49
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Mr. Gasket – Overhaul Trans Gasket Kit (Part No.2492)
from
$34.99
Every gasket you need to build or completely rebuild a Muncie transmission. These reusable gaskets let you check transmission gears for wear without the extra expense of replacement gaskets. Precision die cut for an excellent seal and fit.
Product Features:
See More
Product Features:
- Reusable
- Extra Thin Gasket Material
National – Multi Purpose Seal (Part No.5208)
from
$18.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2268)
from
$8.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 66-73; CHEV 58-84; GMC 67-84; OLDS 68-72; PONT 61-77;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1958-1984
- Weight approx: 2 Lbs
- RUBBER CROWN WITH AIR GAP
- HEIGHT WITHOUT STUDS: 1.9 INCH: 48.25 MM
- STUDS AND BOLT HOLES INLINE
- STUD CENTERLINE: 1.5 INCH: 38.1 MM
Energy Suspension – Transmission Mount (Part No.3.1108R)
from
$44.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2360)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 70-93; CADI 76-80; CHEV 65-93; GMC 73-87; OLDS 68-92; PONT 70-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1993
- Weight approx: 1 Lbs
- HEIGHT: 1.85 INCH / 47 MM WITHOUT STUD
- STUD AND BOLT HOLES INLINE
- STUD: M10-1.5, 28 MM
- MOUNT HOLES: 4.0 INCH / 101.6 MM ELONGATED
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2378)
from
$9.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 65-74; CHEV 57-84; GMC 67-84; OLDS 64-79; PONT 64-81;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1957-1984
- Weight approx: 2 Lbs
- HEIGHT: 1.8 INCH: 45.7 MM
- ALL BOLT HOLES INLINE
- BOLT CENTERLINE: 1.5 INCH: 38.1 MM
Popular 1964 Oldsmobile Vista Cruiser Transmission Parts Categories
1964 Oldsmobile Vista Cruiser Transmission Parts
You count on your 1964 Oldsmobile Vista Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 42 Transmission Parts ranging in price from $1.99 to $85.99, you’re sure to find everything you need for your 1964 Oldsmobile Vista Cruiser.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 10 different brands like Imperial, National, and Driveworks. 1964 Oldsmobile Vista Cruiser Transmission Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 180 extensive product reviews on 1964 Oldsmobile Vista Cruiser Transmission Parts. Some of the top-rated Transmission Parts products we carry are Multi Purpose Seal with 4.4 stars and Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1964 Oldsmobile Vista Cruiser below to get started!
Top-Rated Transmission Parts Brands For Your 1964 Oldsmobile Vista Cruiser
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Oldsmobile Vista Cruiser running right for years to come. In our inventory you’ll find brands like Imperial, National, Driveworks, and even more.
Popular ATP Transmission Parts
You’ll find popular ATP brand products across Transmission Seals. All are waiting to get your 1964 Oldsmobile Vista Cruiser back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1964 Oldsmobile Vista Cruiser, and some of our most reviewed Imperial parts include:
FAQs for 1964 Oldsmobile Vista Cruiser Transmission Parts
What are the most purchased Transmission Parts for the 1964 Oldsmobile Vista Cruiser?
Out of 42 Transmission Parts for the 1964 Oldsmobile Vista Cruiser, the most popular in our inventory are:
What are the top-rated 1964 Oldsmobile Vista Cruiser Transmission Parts?
Top-rated Transmission Parts for your 1964 Oldsmobile Vista Cruiser based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
