1955 Ford F-100 Pickup Drivetrains
More 1955 Ford F-100 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1955 Ford F-100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1955 Ford F-100 Pickup Drivetrains
Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)
from
$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
- Smooth design
- Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
National – Wheel Bearing and Seal Kit (Part No.RA-311MK)
from
$115.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)
from
$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ without aftermarket Daytona pinion support
- Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
Motive Gear – Differential Carrier Gear Kit (Part No.706043XR)
from
$156.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Powr Lok positraction only
Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Aggressive Design (Part No.26009)
from
$784.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 31 spline axles
- Trac Loc positraction
- Clutch style positraction
- Aggressive design
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Set Up Bearing (Part No.56037)
from
$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 44
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Motive Gear – Differential Pinion Seal (Part No.7044NA)
from
$12.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)
Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
National – Taper Bearing Cone (Part No.LM501349)
from
$17.99
Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Spicer – Axle Shft Univ Joint (Part No.5-3226X)
from
$47.99
Axle Shft Univ Joint
Powertrax – Grip LOK Traction System (Part No.LK109031)
from
$679.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – Bearing Race Driver (Part No.56014)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88510 race
- All steel construction
National – Multi Purpose Seal (Part No.2146)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
National – Transfer Case Output Shaft Seal (Part No.99156)
from
$24.99
Transfer Case Output Shaft Seal
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Popular 1955 Ford F-100 Pickup Drivetrains Categories
1955 Ford F-100 Pickup Drivetrains
You count on your 1955 Ford F-100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 142 Drivetrains ranging in price from $3.99 to $1,302.99, you’re sure to find everything you need for your 1955 Ford F-100 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Spicer, Yukon Gear, and Anchor. 1955 Ford F-100 Pickup Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 365 extensive product reviews on 1955 Ford F-100 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 3.9 stars and Oil Seal with 4.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1955 Ford F-100 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1955 Ford F-100 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1955 Ford F-100 Pickup running right for years to come. In our inventory you’ll find brands like Spicer, Yukon Gear, Anchor, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1955 Ford F-100 Pickup back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1955 Ford F-100 Pickup, and some of our most reviewed National parts include:
FAQs for 1955 Ford F-100 Pickup Drivetrains
What are the most purchased Drivetrains for the 1955 Ford F-100 Pickup?
Out of 142 Drivetrains for the 1955 Ford F-100 Pickup, the most popular in our inventory are:
What are the top-rated 1955 Ford F-100 Pickup Drivetrains?
Top-rated Drivetrains for your 1955 Ford F-100 Pickup based on customer reviews/ratings are:
