White WCS Parts

Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.31" Long, 2.25" Diameter
Brand: Dayco
SKU: C72139
Price: 20.29 USD

White WCS Belts and Hoses

from

$20.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$2.99

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
Engineered with compounds that resist electrochemical degradation
Approved for marine applications
Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the inch. See store for details.

from

$38.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$34.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$23.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and pro

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$27.49

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$1.49

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
Engineered with compounds that resist electrochemical degradation
Approved for marine applications
Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the inch. See store for details.

from

$23.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses

from

$26.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$75.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$59.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$33.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$46.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$32.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$6.29

Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:

Green Stripe construction provides best cost-per-mile economics
Abrasion-resistant cover
Engineered with materials to resist electrochemical degradation
Reduces water loss from water permeating the hose wall and cover
Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$3.79

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
Engineered with compounds that resist electrochemical degradation
Approved for marine applications
Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the inch. See store for details.

from

$18.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

White WCS Fuel and Emissions Systems

from

$27.49

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Made in USA
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$41.99

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Application engineered media which aids in stripping water in diesel fuels
Patent pending drain, metal end caps, which hold media in place
Rust resistant can, ensuring no leakage from inside
Made in USA
Includes Standpipe
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$33.99

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Application engineered media which aids in stripping water in diesel fuels
Patent pending drain, metal end caps, which hold media in place
Rust resistant can, ensuring no leakage from inside
Made in USA
CAUTION: Furnished D-Ring must be installed on post for seal.
Use with 99185

White WCS Drivetrains

from

$37.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1957-2018
Weight approx: 8 Lbs
BEARING ID / BORE: 2.3622 INCH / 60 MM
CENTERLINE: 3.37 INCH / 86 MM
MOUNT WIDTH: 8.62 INCH / 219 MM

from

$46.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-96; DODGE 71-81; FORD 75-98; GMC 79-96; INTL 57-02; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1957-2013
Weight approx: 6 Lbs
BEARING ID / BORE: 1.9685 INCH / 50 MM
CENTERLINE: 2.80 INCH / 71 MM
MOUNT WIDTH: 7.62 INCH / 194 MM

from

$17.79

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1957-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.7680 INCH / 45 MM
CENTERLINE: 2.75 INCH / 70 MM
MOUNT WIDTH: 7.62 INCH / 194 MM

from

$34.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.48 INCH / 63 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
NOT PICTURED: TWO DUST SHIELDS

from

$22.79

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$5.29

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2012
Weight approx: 1 Lbs
CUSHION INSERT ONLY
FOR COMPLETE MOUNT SEE PART 6056

White WCS Cooling and Climate Controls

from

$108.99

Product Features:

Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
100 percent fully tested unitized bearings and seals
Computerized machined surfaces for proper fit and sealing
Gates heavy-duty water pumps are represented as a part number with an HD suffix
Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
New pumps manufactured to ISO/TS 16949 standards

from

$71.99

This back plate is an all new, original equipment-quality component for proper fit and long-life performance. Each plate is precision machined for optimal impeller clearance, plus all new back plates are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:

This plate may become worn during normal engine operation
It is highly recommended that the plate be replaced at the same time as the pump
Machined grey iron plate
Creates optimized impeller clearance for maximum coolant flow
Follow all enclosed instructions to maximize plate life and validate warranty

from

$409.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$618.99

Product Features:

Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
100 percent fully tested unitized bearings and seals
Computerized machined surfaces for proper fit and sealing
Gates heavy-duty water pumps are represented as a part number with an HD suffix
Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
New pumps manufactured to ISO/TS 16949 standards

from

$521.99

Product Features:

Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
100 percent fully tested unitized bearings and seals
Computerized machined surfaces for proper fit and sealing
Gates heavy-duty water pumps are represented as a part number with an HD suffix
Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
New pumps manufactured to ISO/TS 16949 standards

from

$139.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$289.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$137.99

Product Features:

Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
100 percent fully tested unitized bearings and seals
Computerized machined surfaces for proper fit and sealing
Gates heavy-duty water pumps are represented as a part number with an HD suffix
Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
New pumps manufactured to ISO/TS 16949 standards

from

$105.99

Product Features:

Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
100 percent fully tested unitized bearings and seals
Computerized machined surfaces for proper fit and sealing
Gates heavy-duty water pumps are represented as a part number with an HD suffix
Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
New pumps manufactured to ISO/TS 16949 standards

from

$48.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$50.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$52.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$55.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$28.99

CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:

Standard life Spin-on coolant filter
Made in USA
Includes 4 Units BTA PLUS
Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.

from

$55.99

CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:

Standard life Spin-on coolant filter
Made in USA
Includes 15 Units BTA PLUS
Maintenance filter for systems with 44-51 gallons capacity. Can be used with 89019 base.

from

$69.99

CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:

Standard life Spin-on coolant filter
Made in USA
Includes 23 Units BTA PLUS
Maintenance filter for systems with 52-70 gallons capacity. Can be used with 89019 base.

Looking for the best White WCS aftermarket replacement parts? Replacing worn and broken parts on your White WCS? Check out our online catalog to find the best selection of aftermarket White WCS parts as well as real user reviews on White WCS replacement parts. Make an informed decision about every component you add to your WCS.

At Advance Auto, we’ve got you covered when it comes to getting your White WCS in tip top condition. We’ve got over 190 White WCS parts to choose from in popular categories like Belts and Hoses, Fuel and Emissions Systems and Drivetrains. If you’re looking for the best prices, try searching our White WCS parts catalog to compare OEM and aftermarket parts for your White WCS.

Whether you need White WCS body parts, interior components, or custom White WCS parts you can find them online at Advance Auto. Want to order your Tools online? Or maybe you need your White Cooling and Climate Controls same day? No problem, you can pick up WCS parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used White WCS parts has never been easier.

Advance Auto customers frequently search for the following types of White WCS auto parts. Check out customer reviews and ratings, and compare prices on the following White WCS parts:

People also search Advance Auto for these popular years of the White WCS:

White WCS Parts

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.31" Long, 2.25" Diameter (Part No.C72139)

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Gates – Premium Molded Coolant Hose (Part No.21115)

Gates – Automotive XL« High Capacity V-Belt (Part No.9540)

Dayco – Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.22570)

Dayco – V-Belt, Top Cog (Part No.17525)

Driveworks – Automotive V-Belt (Part No.45017)

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24220)

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 11 Inch Long, 2.25 Inch Inner Dia. (Part No.82171GL)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter (Part No.E70922)

Gates – V-Ribbed Serpentine Belt: 53.169" Long, 8 Rib Count, Exact Fit (Part No.K080525)

Gates – Micro-V« Serpentine Drive Belt (Part No.K080565)

Dayco – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.5060436)

Dayco – Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty (Part No.5080565)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K040445HD)

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28442)

Gates – Premium Molded Coolant Hose (Part No.21488)

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24236)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.50" Long, 2.56" Diameter (Part No.B70712)

Gates – Premium Molded Coolant Hose (Part No.21194)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, 2.25" Diameter (Part No.B71729)

Carquest Premium – Fuel Spin-on with Drain (Part No.86405)

Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86406)

Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.96064)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6049)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6048)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Gates – Heavy-Duty Engine Water Pump (Part No.44600HDBP)

Carquest Premium – Engine Water Pump Adapter (Part No.T3009)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5009)

Gates – Heavy-Duty Engine Water Pump (Part No.45009HD)

Gates – Heavy-Duty Engine Water Pump (Part No.42321HD)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3011)

Carquest Premium – Auxiliary Water Pump: New, Mounting Gasket Included (Part No.T2018)

Gates – Heavy-Duty Engine Water Pump (Part No.41173HD)

Gates – Heavy-Duty Engine Water Pump (Part No.41111HD)

Carquest Premium – Heavy Duty Thermostat: 170 Degrees (Part No.14007)

Carquest Premium – Heavy Duty Thermostat: 180 Degrees (Part No.14008)

Carquest Premium – Heavy Duty Thermostat: With Seal, 170 Degrees (Part No.15197)

Carquest Premium – Heavy Duty Thermostat: With Seal, 180 Degrees (Part No.15198)

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.96324)

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.89075)

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.99065)