Triumph TR3A Parts

Please Select your Vehicle to See Exact Fit Parts

Triumph TR3A Belts and Hoses

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR28386)

Green Stripe Truck & Bus Series V-Belt

from

$49.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus and high strength traction cord
  • Oil and heat resistant construction
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand V-belts
See More
View Product

Dayco – Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch) (Part No.76125)

Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch)

from

$0.99
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy-duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Meets SAE J20R4, Class D-2 requirements.
  • Features a high strength knitted reinforcement and synthetic EPDM rubber construction
  • Resistant to standard coolants, ozone and other detrimental environmental elements
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.20801)

Premium Molded Coolant Hose

from

$25.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Designed to resist electrochemical degradation, the main cause of casing failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More
View Product

Triumph TR3A Transmission Parts

National – Differential Pinion Seal (Part No.470487N)

Differential Pinion Seal

from

$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(8 reviews)
View Product

National – Multi-Purpose Seal (Part No.473234)

Multi-Purpose Seal

from

$15.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

Triumph TR3A Automotive Accessories

Covercraft – Custom Fit Car Covers WeatherShield HD Gray (Part No.C1HG)

Custom Fit Car Covers WeatherShield HD Gray

from

$586.99
As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:
  • The most heavy-duty car cover on the market
  • Specially treated to resist fading and color transfer
  • Sheds water and blocks out dust
  • Outsmart the outdoors!
See More
View Product

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C1D6)

Custom Fit Car Covers Sunbrella Toast

from

$588.99
Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:
  • Best for intense sun locations
  • Durable long-lasting fabric
  • Solution dyed woven acrylic fabric
  • Provides almost complete UV blockage
See More
View Product

Budge – Budge Basic Car Cover, Gray, Size 1: Fits up to 13’1" L, Scratch Resistant (Part No.B-1)

Budge Basic Car Cover, Gray, Size 1: Fits up to 13'1" L, Scratch Resistant

from

$39.99
The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:
  • This car cover fits cars 157″ L x 60″ W x 48″ H
  • This car cover is suitable for indoor and short term outdoor storage
  • This vehicle cover features double stitched seams for added durability
  • A full elastic hem helps keep the car cover securely on your vehicle
  • Will defend against dust, dirt, bird droppings, tree sap and more
See More

(107 reviews)
View Product

Covercraft – Custom Fit Car Covers Sunbrella Gray (Part No.C1D4)

Custom Fit Car Covers Sunbrella Gray

from

$588.99
Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:
  • Best for intense sun locations
  • Durable long-lasting fabric
  • Solution dyed woven acrylic fabric
  • Provides almost complete UV blockage
See More
View Product

Budge – Rain Barrier Car Cover Grey Size 1: Fits up to 13 ft. 1 in. L, Water Resistant, Breathable (Part No.RB-1)

Rain Barrier Car Cover Grey Size 1: Fits up to 13 ft. 1 in. L, Water Resistant, Breathable

from

$99.99
The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 157″ L x 60″ W x 48″ H.

Product Features:
  • This car cover fits cars 157″ L x 60″ W x 48″ H.
  • This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
  • This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
  • This vehicle cover features ultrasonically welded seams for extra durability
  • Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions
See More

(193 reviews)
View Product

Covercraft – Custom Fit Car Covers Polycotton Gray (Part No.C1PD)

Custom Fit Car Covers Polycotton Gray

from

$198.99
Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:
  • Good basic indoor protection
  • Drill weave Polycotton blend
  • Resists tears and punctures
  • Treated to resist rot and mildew
See More
View Product

Covercraft – Custom Fit Car Covers Sunbrella Pacific Blue (Part No.C1D1)

Custom Fit Car Covers Sunbrella Pacific Blue

from

$588.99
Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:
  • Best for intense sun locations
  • Durable long-lasting fabric
  • Solution dyed woven acrylic fabric
  • Provides almost complete UV blockage
See More
View Product

Budge – Indoor Stretch Car Cover, Red Size 1: Fits Cars Up To 13′ 1" L, Soft Innerlining (Part No.RSC-1)

Indoor Stretch Car Cover, Red Size 1: Fits Cars Up To 13' 1" L, Soft Innerlining

from

$159.99
Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:
  • This car cover fits cars 157″ L x 60″ W x 48″ H
  • This indoor vehicle cover is made from a stretchable material conforms to you car
  • Extremely soft fleece lining to protect your car from scratches
  • This auto cover is suitable for indoor use or for garage kept vehicles
  • This car cover fits vehicles like: Mazda Miata, Honda Del Sol, Shelby Cobra, Triumph Spitfire, AC Cobra
See More
View Product

Budge – Ultra Car Cover, Gray, Size 1: Fits up to 13’1" L, 3 Layers, Water Resistant (Part No.D-1)

Ultra Car Cover, Gray, Size 1: Fits up to 13'1" L, 3 Layers, Water Resistant

from

$89.99
The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:
  • This car cover fits cars 157″ L x 60″ W x 48″ H
  • This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
  • This car cover is water resistant and features ultrasonically welded seams for extra durability
  • Cover is suitable for short term outdoor protection and long-term indoor protection
  • This car cover fits vehicles like: Mazda Miata, Honda Del Sol, Shelby Cobra, Triumph Spitfire, AC Cobra
See More

(50 reviews)
View Product

Covercraft – Custom Fit Car Cover Flannel Tan (Part No.C1TF)

Custom Fit Car Cover Flannel Tan

from

$365.99
For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:
  • A favorite amongst car enthusiasts
  • Flannel lined for an ultra-soft, paint-friendly cover
  • Constructed from all cotton based materials
  • Our ‘classic’ indoor cover
See More
View Product

Search Over 105 Triumph TR3A Parts Online for Delivery or Pick Up

Looking for the best Triumph TR3A aftermarket replacement parts? Replacing worn and broken parts on your Triumph TR3A? Check out our online catalog to find the best selection of aftermarket Triumph TR3A parts as well as real user reviews on Triumph TR3A replacement parts. Make an informed decision about every component you add to your TR3A.

At Advance Auto, we’ve got you covered when it comes to getting your Triumph TR3A in tip top condition. We’ve got over 105 Triumph TR3A parts to choose from in popular categories like Belts and Hoses, Transmission Parts and Automotive Accessories. If you’re looking for the best prices, try searching our Triumph TR3A parts catalog to compare OEM and aftermarket parts for your Triumph TR3A.

Whether you need Triumph TR3A body parts, interior components, or custom Triumph TR3A parts you can find them online at Advance Auto. Want to order your Engine Parts online? Or maybe you need your Triumph Exhaust Parts same day? No problem, you can pick up TR3A parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Triumph TR3A parts has never been easier.

Popular Types of Parts for Triumph TR3A

Advance Auto customers frequently search for the following types of Triumph TR3A auto parts. Check out customer reviews and ratings, and compare prices on the following Triumph TR3A parts:

More Popular Parts for All Makes