Toyota Tercel Drivetrains

Essential Toyota Tercel Drivetrains

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

from

$6.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

NTN – BCA Wheel Bearing (Part No.K8000183248NTN)

BCA Wheel Bearing

from

$21.55
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:
  • For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
  • For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
See More

NOK – Wheel Seal (Part No.K801048825NOK)

Wheel Seal

from

$6.19
Wheel Seal

Dorman – Rear Axle Differential Vent (Part No.924-262)

Rear Axle Differential Vent

from

$11.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Oil Seal (Part No.S-223542)

Oil Seal

from

$6.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Sold by each) (Part No.615-109)

Standard Spindle Nut M19-1.5 Hex Size 30mm (Sold by each)

from

$11.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M16-1.5 Hex Size 22mm (sold by each) (Part No.615-093)

Spindle Nut M16-1.5 Hex Size 22mm (sold by each)

from

$2.49
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99134)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Set (Part No.S-A-18)

Taper Bearing Set

from

$10.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-107)

Rear Drive Shaft: Adjustable

from

$823.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69005)

CV Axle Shaft Assembly

from

$163.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-1174)

Oil Seal

from

$6.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

EMPI – Axle Shaft Nut (Part No.K403059357EMP)

Axle Shaft Nut

from

$5.11
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Beck/Arnley – Seal Drive Axle Flange (Part No.052-3521)

Seal Drive Axle Flange

from

$14.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for durability
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181549EMP)

RE CV Joint Boot Kit

from

$27.39
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Driveworks – Oil Seal (Part No.S-710110)

Oil Seal

from

$4.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8468)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$97.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1981-1988
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.50 INCH / 13 MM
  • MOUNT WIDTH: 6.00 INCH / 152 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

Universal C.V. Joint Boot Kit Front Outer

from

$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2828)

Cu Boot Kit

from

$35.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Helping You Find the Right Drivetrains for Your Toyota Tercel

You love your Tercel. So we’ve made it easier than ever to help you find Toyota Tercel Drivetrains in our online catalog. Our inventory holds 58 aftermarket and OEM Drivetrains for your Toyota Tercel, ranging from $2.29 to $823.99.

We offer parts from 14 brands trusted to make quality Drivetrains for your Toyota Tercel. Before you buy, take some time to read through customer reviews. We currently have 4,942 reviews of Toyota Tercel Drivetrains from previous customers. Some of the top rated parts include Bearings with 4.2 stars and Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter with 3.4 stars.

Find your Tercel Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Toyota Tercel part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Toyota Tercel

Our inventory holds Drivetrains for your Toyota Tercel from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Royal Purple, and National, all of which can keep that Toyota happy.

FAQs for Toyota Tercel Drivetrains

What are the most purchased Drivetrains for the Toyota Tercel?

Out of 58 Drivetrains for the Toyota Tercel, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Differential Oil

What are the top-rated Toyota Tercel Drivetrains?

Top-rated Drivetrains for your Toyota Tercel based on customer reviews/ratings are:
Bearings
from $16.99
(39)
Bearings
“All good”
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
from $29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
“A little hard to get on, but I googled it and found a solution.”
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
“Everything worked as it should 5 stars”