Toyota RAV4 Motor Oil

Uniquely designed for your drive, Pennzoil Extended Care Full Synthetic motor oil combats engine aging to extend the life of your engine

Product Features:

• Pennzoil Extended Care Full Synthetic helps keep your engine clean by preventing engine deposits and formation of sludge
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 0W-20 or 5W-20 viscosity grade engine oils

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• GM dexos1 Gen 3
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Pennzoil Full Synthetic 5W-30 motor oil is formulated to provide 40% better performance than conventional motor oil (compared to Pennzoil Conventional motor oil), and helps prevent sludge and deposit build up. Pennzoil Full Synthetic Motor oil is formulated to help you go longer between oil changes- it is formulated for longer drain intervals than conventional and synthetic blend motor oils. Pennzoil utilizes the advances of synthetic technology to provide improved cleanliness over synthetic blend motor oils. It meets or exceeds the engine protection required by ILSAC GF-6. So if your car already requires full synthetic, or if you’re looking to upgrade from conventional or synthetic blend Pennzoil Full Synthetic is the right choice for you.

Product Features:

• Fewer oil changes compared to conventional engine oil
• Enhanced wear protection in high and low temperatures
• Excellent resistance to oil breakdown in severe environments
• Formulated for longer drain intervals than conventional and synthetic blend engine oils
• Suitable for use in new and old engines
• Meets or exceeds: api sp- resource conserving and all previous categories, ilsac gf-6
• Specs and approvals: chrysler ms 6395 and ford wss-m2c947-a

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

• Faster oil flow at start-up!
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
• Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Porsche A40
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C961-A1

If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 0W-20. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 extended performance full-synthetic engine oil 0w-20 helps protect critical engine parts for up to 20,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity.
• Utilizes Mobil 1’s triple action+ formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi ) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees f ) and low temperature protection (to -40 degrees f )
• Manufacturer part number: 120926

Pennzoil Full Synthetic 0W-20 motor oil is formulated to provide 40% better performance than conventional motor oil (compared to Pennzoil Conventional motor oil), and helps prevent sludge and deposit build up. Pennzoil® Full Synthetic Motor oil is formulated to help you go longer between oil changes- it is formulated for longer drain intervals than conventional and synthetic blend motor oils. Pennzoil utilizes the advances of synthetic technology to provide improved cleanliness over synthetic blend motor oils. It meets or exceeds the engine protection required by ILSAC GF-6. So if your car already requires full synthetic, or if you’re looking to upgrade from conventional or synthetic blend Pennzoil Full Synthetic is the right choice for you.

Product Features:

• Fewer oil changes compared to conventional motor oil
• Enhanced wear protection in high and low temperatures
• Excellent resistance to oil breakdown in severe environments
• Formulated for longer drain intervals than conventional and synthetic blend motor oils
• Suitable for use in new and old engines
• Meets or exceeds: API SP- Resource Conserving and all previous Categories, ILSAC GF-6
• Specs and Approvals: Chrysler MS 6395 and Ford WSS-M2C947-A
• Superior Performance: Pennzoil Full Synthetic 0W-20 motor oil delivers 40% better performance compared to conventional motor oil, ensuring optimal engine efficiency.
• Enhanced Engine Cleanliness: Utilizing advanced synthetic technology, Pennzoil Full Synthetic motor oil provides improved cleanliness over synthetic blend motor oils, helping to prevent sludge and deposit build-up.
• Optimal for Full Synthetic Requirements: Ideal for vehicles that require full synthetic oil or for those looking to upgrade from conventional or synthetic blend oils, Pennzoil Full Synthetic 0W-20 is the right choice for superior engine care.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy (1) and extend engine life for vehicles of all ages. Mobil 1 Advanced Fuel Economy utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Specialty components in synthetic oil reduce friction, helping to prevent deposits and sludge buildup to keep critical engine parts clean and protected for up to 10,000 miles between oil changes. (2) This technologically advanced formulation offers outstanding engine efficiency, wear protection, internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit)-bringing quick cold-weather starting and ultra-fast protection to your engine. Mobil 1 Advanced Fuel Economy meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (3) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR.

Product Features:

• Mobil 1 advanced fuel economy full-synthetic engine oil 0w-20 is low-viscosity to help improve fuel economy. (1)
• Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes, (2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer part number: 105891
• (1) Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, & your current engine oil viscosity
• (2) Protects for up to 10,000 miles or 1 year, whichever comes first. to learn more about the Mobil 1 limited warranty, visit mobil.us.
• (3) Source: the npd group/ retail tracking service/ dollar sales/ pcmo full-synthetic/ 52 weeks ending july 1, 2023

Pennzoil Start-Stop Protection Full Synthetic motor oil protects against damaging effects of frequent short trips and stop-and-go driving. Pennzoil Start-Stop Protection Full Synthetic helps reduce deposit and sludge build-up to improve engine performance while driving in heavy traffic. Pennzoil Start-Stop Protection also provides unsurpassed anti-wear protection for millions of stop-and-starts. Pennzoil’s patented process synthesizes natural gas into a 99.5 % pure base oil that results in better oxidative stability, cold temperature performance, and volatility control. Pennzoil makes taking care of your vehicle easier with its range of premium motor oils – each one specially formulated to meet the requirements of your engine and unique driving style.

Product Features:

• Uniquely designed for your drive, Pennzoil Start/Stop Protection Full Synthetic motor oil protects against the damaging effects of stop-and-go driving
• Pennzoil Start/Stop Protection motor oil helps reduce deposit and sludge build-up to improve engine performance while driving in heavy traffic.
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 0W-20 viscosity grade engine oils; suitable for use in SAE 5W-20 applications

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

FRAM Engine Oil Full Synthetic SAE 0W-16 is premium fully synthetic motor oil formulated with high quality synthetic base oils and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6B specifications and provide the ultimate protection for your engine. FRAM Engine Oil Full Synthetic SAE 0W-16 is designed to deliver increased fuel efficiency and deposit protection even under severe service conditions. FRAM Engine Oil Full Synthetic SAE 0W-16 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. This engine oil is specially designed to meet the performance requirements of Asian manufacturers while also meeting North American and European OEM requirements where SAE 0W-16 oil is recommended.

Product Features:

• Outstanding thermal and oxidation stability
• Fuel efficiency gains over heavier grade oils
• Excellent wear protection for vehicles recommending use of sae 0w-16
• Faster oil flow at start-up especially in cold weather conditions
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
• High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
• Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
• SAE oil weight of 10W-30, making it a dependable choice for various engine types.

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SP/SN PLUS/SN/SM
• ILSAC GF-6

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
• Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy (1) and extend engine life for vehicles of all ages. Mobil 1 Advanced Fuel Economy utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Specialty components in synthetic oil reduce friction, helping to prevent deposits and sludge buildup to keep critical engine parts clean and protected for up to 10,000 miles between oil changes. (2) This technologically advanced formulation offers outstanding engine efficiency, wear protection, internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit)-bringing quick cold-weather starting and ultra-fast protection to your engine. Mobil 1 Advanced Fuel Economy meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (3) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR.

Product Features:

• Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.(1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 124185
• (1)Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, & your current engine oil viscosity
• (2) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.
• (3) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light tru

You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes. (1)
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer Part Number: 123836
• Leak Prevention: Specifically designed to help prevent leaks in engines with over 75,000 miles, offering extra care and maintenance for older vehicles.
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C960-A1
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol Full Synthetic 5W-30 Engine Oil is expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures. This full synthetic oil, classified as standard with an SAE oil weight of 5W-30, ensures exceptional lubrication for all engine components, from the valve train to the bearings, providing the strength needed for maximum engine performance.

Product Features:

• Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
• Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
• Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
• Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
• Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage with MaxLife Technology is specifically designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive rep