Toyota Corolla Drivetrains

Please Select your Vehicle to See Exact Fit Parts

Essential Toyota Corolla Drivetrains

Schaeffler – Cup (Part No.LM48510)

Cup

from

$7.69
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Carquest Premium – New CV Axle Shaft Assembly (Part No.NCV69027)

New CV Axle Shaft Assembly

from

$98.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-710110)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Schaeffler – Cone (Part No.KL44649)

Cone

from

$13.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Dorman – CV Axle Shaft Support Bearing Bracket (Part No.926-192)

CV Axle Shaft Support Bearing Bracket

from

$81.99
This CV axle support bearing matches the fit and function of the original equipment bearing to maintain proper support for the front axle. This support bearing replaces an original equipment part that may be worn or become damaged during service.

Product Features:
  • Ideal replacement – this CV axle support bearing matches the fit and function of the original equipment support bearing
  • Durable materials – this axle support bearing is made of quality material for a long-lasting repair
  • Convenient service item – this support bearing may be required when replacing the CV joint or axle
  • Thoroughly tested – this part has undergone try-on testing to ensure conformance to product standards
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$9.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi-Purpose Bearing (Part No.A-5)

Multi-Purpose Bearing

from

$17.99
Product Features:
  • CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN: Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Felpro – Differential Carrier Gasket Round Shaped 10 Bolt Hole Gasket (Part No.RDS 27413)

Differential Carrier Gasket Round Shaped 10 Bolt Hole Gasket

from

$6.29
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • SUPERIOR SEAL — Manufactured with rubber compounds to help ensure a consistent and long-life seal
  • PRECISE DESIGN — Engineered to work with the embossed cover and pan flanges
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

National – Multi-Purpose Seal (Part No.223840)

Multi-Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Split CV Boot – with Quick Drying Adhesive (Part No.614-700)

Split CV Boot - with Quick Drying Adhesive

from

$44.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99196)

Shaft Repair Sleeve

from

$33.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2976)

Cu Boot Kit

from

$37.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Dorman – Spindle Nut M20-1.5 Hex Size 30mm (Sold by each) (Part No.615-102)

Spindle Nut M20-1.5 Hex Size 30mm (Sold by each)

from

$2.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi-Purpose Seal (Part No.221510)

Multi-Purpose Seal

from

$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi-Purpose Bearing (Part No.32307)

Multi-Purpose Bearing

from

$57.99
Product Features:
  • CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
  • OE-STYLE DESIGN: Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)

Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart

from

$13.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Driveworks – Wheel Hub Repair Kit (Part No.NT518507)

Wheel Hub Repair Kit

from

$84.99
Driveworks Wheel Hub Repair Kit are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub Repair Kits are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Driveworks Wheel Hub Repair Kits. Driveworks Wheel Hub Repair Kits come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.

Product Features:
  • Constructed from quality materials for extended durability
  • Integral raceway provides proper clearance between the ball and bearing riding surfaces
  • Precision-matched components deliver smooth and quiet operation
  • Manufactured to strict engineering quality standards
  • Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
  • Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
  • Brand may vary by location
See More

Dorman – Drive Shaft: Greaseable (Part No.986-119)

Drive Shaft: Greaseable

from

$807.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – Bearing Race (Part No.M86610)

Bearing Race

from

$9.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Spicer – Universal Joint, Non-Greaseable Toyota Nissan Series (Part No.5-1500X)

Universal Joint, Non-Greaseable Toyota Nissan Series

from

$46.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:
  • Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
  • Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
  • Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
  • Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
See More

Dorman – Axle Support Bushing (Part No.523-032)

Axle Support Bushing

from

$103.99
This axle support bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Part No.615-109.1)

Standard Spindle Nut M19-1.5 Hex Size 30mm

from

$10.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Axle Differential Vent (Part No.924-262)

Axle Differential Vent

from

$11.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
See More

Helping You Find the Right Drivetrains for Your Toyota Corolla

You love your Corolla. So we’ve made it easier than ever to help you find Toyota Corolla Drivetrains in our online catalog. Our inventory holds 83 aftermarket and OEM Drivetrains for your Toyota Corolla, ranging from $2.99 to $907.99.

We offer parts from 11 brands trusted to make quality Drivetrains for your Toyota Corolla. Before you buy, take some time to read through customer reviews. We currently have 117,289 reviews of Toyota Corolla Drivetrains from previous customers. Some of the top rated parts include Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter with 3.4 stars and CV Axle Shaft Assembly with 4.0 stars.

Find your Corolla Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Toyota Corolla part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Toyota Corolla

Our inventory holds Drivetrains for your Toyota Corolla from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Driveworks, and National, all of which can keep that Toyota happy.

FAQs for Toyota Corolla Drivetrains

What are the most purchased Drivetrains for the Toyota Corolla?

Out of 83 Drivetrains for the Toyota Corolla, the most popular in our inventory are:
Taper Bearing Set
from $9.99
(70)
Taper Bearing Set
Axle Shaft Bearings
Multi-Purpose Bearing
from $17.99
(39)
Multi-Purpose Bearing
Drive Shaft Bearings
New CV Axle Shaft Assembly
from $102.99
(19)
New CV Axle Shaft Assembly
Drive Shaft and Axles

What are the top-rated Toyota Corolla Drivetrains?

Top-rated Drivetrains for your Toyota Corolla based on customer reviews/ratings are:
CV Axle Shaft Assembly
from $141.99
(24)
CV Axle Shaft Assembly
“New ,easy to install”
New CV Axle Shaft Assembly
from $159.99
(22)
New CV Axle Shaft Assembly
“Part worked perfectly and for a reasonable price”