Suzuki Grand Vitara Drivetrains

Essential Suzuki Grand Vitara Drivetrains

EMPI – CV Boot Kit (Part No.K60101340231EMP)

CV Boot Kit

from

$41.11
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Driveworks – Oil Seal (Part No.S-3543)

Oil Seal

from

$4.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Wheel Seal (Part No.S-1213N)

Wheel Seal

from

$3.79
Product Features:
  • Brand may vary by location
See More

Rugged Ridge – Locking Hub (Part No.15001.38)

Locking Hub

from

$268.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:
  • Impact Resistant Nodular Iron
  • Corrosion Resistant
  • Better 4WD Performance
  • Better Fuel Economy
  • Easy Install
See More

SKF – Wheel Bearing (Part No.K8000300577SKF)

Wheel Bearing

from

$24.51
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

National – Bearings (Part No.KC-11445-Y)

Bearings

from

$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)

ATF for Mercon®V Applications Conventional, 1 Quart

from

$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter

from

$35.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-822)

Rear Drive Shaft: Adjustable

from

$1041.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Driveworks – Differential Pinion Seal (Part No.S-710523)

Differential Pinion Seal

from

$24.29
Product Features:
  • Brand may vary by location
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

NSK – Wheel Bearing (Part No.K8000181222NSK)

Wheel Bearing

from

$31.83
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer.

Product Features:
  • Original Equipment Quality
  • Premium modified bearing steel
  • Optimized sealing systems
See More

Spicer – U Joint (Part No.K10102524312SPI)

U Joint

from

$49.08
U Joint

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Tapered Roller Bearing (Part No.S-30306)

Tapered Roller Bearing

from

$14.29
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.30306)

Bearings

from

$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Ball Bearing (Part No.S-206-FF)

Ball Bearing

from

$5.79
Product Features:
  • Brand may vary by location
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (Part No.615-160.1)

Spindle Nut M22-1.5 Hex Size 32mm

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-160)

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)

from

$5.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV68037)

CV Axle Shaft Assembly

from

$156.99
N

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV68030)

CV Axle Shaft Assembly

from

$86.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.30307)

Bearings

from

$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Helping You Find the Right Drivetrains for Your Suzuki Grand Vitara

You love your Grand Vitara. So we’ve made it easier than ever to help you find Suzuki Grand Vitara Drivetrains in our online catalog. Our inventory holds 43 aftermarket and OEM Drivetrains for your Suzuki Grand Vitara, ranging from $3.79 to $1,041.99.

We offer parts from 14 brands trusted to make quality Drivetrains for your Suzuki Grand Vitara. Before you buy, take some time to read through customer reviews. We currently have 22,206 reviews of Suzuki Grand Vitara Drivetrains from previous customers. Some of the top rated parts include CV Axle Shaft Assembly with 2.8 stars and Oil Seal with 4.9 stars.

Find your Grand Vitara Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Suzuki Grand Vitara part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Suzuki Grand Vitara

Our inventory holds Drivetrains for your Suzuki Grand Vitara from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Dorman, and National, all of which can keep that Suzuki happy.
We have MOOG Driveline Products parts available for your Suzuki Grand Vitara in categories like Universal Joints. Some of the top-rated MOOG Driveline Products parts in these categories are:
Non-Greaseable Premium Universal Joint
from $46.99
(1)
Non-Greaseable Premium Universal Joint
U-Joints

FAQs for Suzuki Grand Vitara Drivetrains

What are the most purchased Drivetrains for the Suzuki Grand Vitara?

Out of 43 Drivetrains for the Suzuki Grand Vitara, the most popular in our inventory are:
Multi Purpose Seal
from $8.99
(16)
Multi Purpose Seal
Axle Shaft Seals
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
from $29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
CV Quick Boot Kits
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
from $35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
CV Quick Boot Kits

What are the top-rated Suzuki Grand Vitara Drivetrains?

Top-rated Drivetrains for your Suzuki Grand Vitara based on customer reviews/ratings are:
CV Axle Shaft Assembly
from $101.99
(11)
CV Axle Shaft Assembly
“It was a perfect fit. The purchase and pick up went extremely smooth. Thanks guys. Keep up the good work”
Oil Seal
from $4.99
(7)
Oil Seal
“Fits”
CV Axle Shaft Assembly
from $93.99
(4)
CV Axle Shaft Assembly
“easy to put on”