Porsche 911 Cooling and Climate Controls
Top Porsche 911 Cooling and Climate Controls Categories
We carry over 148 Cooling and Climate Controls in inventory for the Porsche 911. If you’re looking for aftermarket Cooling and Climate Controls for your Porsche 911, check out all these categories:
Essential Porsche 911 Cooling and Climate Controls
Carquest Premium – AC Pressure Sensor (Part No.ACA2001)
from
$57.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Behr – Oil Thermostat (Part No.A633034380BEH)
from
$228.42
Oil Thermostat
ACM – ACM A/C Receiver Drier (Part No.R1040115497ACM)
from
$34.14
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meets or exceeds the vehicle manufacturer specifications.
- Utilizes factory style fittings and connectors.
- Includes the required o-rings and associated hardware
Carquest Premium – A/C Condenser (Part No.713700)
from
$266.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
- Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- vibration testing
- blast testing
- and salt spray testing to simulate real world conditions.
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1811)
from
$412.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Ranco – Air Conditioning Temperature Switch (Part No.R1055132743RAN)
from
$81.77
Air Conditioning Temperature Switch
Elring – Water Pump Gasket (Part No.G3040160843ELR)
from
$15.88
Water Pump Gasket
National – Bearings (Part No.5000-KFF)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – Heater Cable (Part No.R3048669078OEA)
from
$21.92
Heater Cable
Behr – Blower Motor Regulat (Part No.R204186117BEH)
from
$83.49
Blower Motor Regulat
Sebro – Sebro Cooling Fan Hub (Part No.G5051650061SEB)
from
$207.64
The Sebro Cooling Fan Hub is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Febi – Expansion Tank Cap (Part No.G1040343540FEB)
from
$35.02
The Febi Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Original Equipment – Water Pipe Gasket (Part No.G2048393250OEA)
from
$6.53
Water Pipe Gasket
Geba – Geba Water Pump (Part No.G3000653741GEB)
from
$294.83
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality cast aluminum.
- Advanced bearing design for high axial and radial stresses.
- Unitized sealing technology that ensures optimal leak tightness and longevity.
- Optimum cooling performance and longevity.
Dansk – Blower Motor (Part No.R203194904DSK)
from
$393.07
Blower Motor
Rein – Cap-Expansion Tank (Part No.CPE0027P)
from
$34.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Bosch – Bosch ABS Speed Sensor (Part No.N6030232277BOS)
from
$106.43
The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.
Product Features:
See More
Product Features:
- OE quality direct fit application
- Manufactured to meet or exceed OE requirements and testing
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
Elring – Water Pump Gasket (Part No.G3040393208ELR)
from
$19.21
Water Pump Gasket
Factory Air – New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil (Part No.47531)
from
$171.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All mounting hardware included
- Every coil tested for proper ohms
- Vehicle specific applications
- Coated to prevent corrosion
A.P.A. URO – Auxiliary Fan Assemb (Part No.G5000129333APA)
from
$217.87
The APA/URO Auxiliary Cooling Fan Assembly is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – A/C New; w/ Clutch; w/ 7SB16C Compressor (Part No.T78313)
from
$407.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C New; w/ Clutch; w/ 7SEU17C Compressor (Part No.T158360)
from
$709.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – New Compressor with Clutch, Nippondenso 10PA15C (Part No.T158310)
from
$330.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Porsche 911 Cooling and Climate Controls Categories
Helping You Find the Right Cooling and Climate Controls for Your Porsche 911
You love your 911. So we’ve made it easier than ever to help you find Porsche 911 Cooling and Climate Controls in our online catalog. Our inventory holds 148 aftermarket and OEM Cooling and Climate Controls for your Porsche 911, ranging from $0.62 to $1,330.10.
We offer parts from 33 brands trusted to make quality Cooling and Climate Controls for your Porsche 911. Before you buy, take some time to read through customer reviews. We currently have 102,416 reviews of Porsche 911 Cooling and Climate Controls from previous customers. Some of the top rated parts include Water Pump: New, Installation Gasket Included with 4.0 stars and Coolant Temp Sensor Switch with 2.6 stars.
Find your 911 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Porsche 911 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Cooling and Climate Controls Brands for Your Porsche 911
Our inventory holds Cooling and Climate Controls for your Porsche 911 from 33 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Carquest Premium, and Factory Air, all of which can keep that Porsche happy.
We have Permatex parts available for your Porsche 911 in categories like Engine Cooling Parts. Some of the top-rated Permatex parts in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Permatex Cooling and Climate Controls
Leading Permatex Cooling and Climate Controls
We carry Permatex brand parts for your Porsche 911 across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for Porsche 911 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the Porsche 911?
Out of 148 Cooling and Climate Controls for the Porsche 911, the most popular in our inventory are:
What are the top-rated Porsche 911 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your Porsche 911 based on customer reviews/ratings are:
from
$181.99
(6)
Water Pump: New, Installation Gasket Included
“Factory pump was 4 times the cost. This is a re-man and had the original porsche part code.
Even came with the gasket.”
from
$41.05
(5)
Coolant Temp Sensor Switch
“Bad reviews are not relevant because this is not what goes to the instrument gauge! This is a “SWICTH” for the cooling fan, it only connects to the c”
from
$172.99
(3)
Blower Motor: With Wheel
“Looks and sounds great! Bearing was going out in the original, so I replaced it with this one because it has a lifetime warranty. It is working perfec”
