1986 Porsche 911 Cooling and Climate Controls
More 1986 Porsche 911 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1986 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1986 Porsche 911 Cooling and Climate Controls
KAI – A/C Receiver Drier (Part No.ACM010157)
from
$14.99
New Standard Replacement A/C Receiver Drier
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Original Equipment – Heater Cable (Part No.R3048669078OEA)
from
$21.92
Heater Cable
Vemo – A/C Temp. Switch (Part No.R1055152191VMO)
from
$26.59
A/C Temp. Switch
Elring – SEAL RING – COPPER (Part No.4M20011240ELR)
from
$1.22
SEAL RING – COPPER
Permatex – Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Original Equipment – Heater Control Swive (Part No.R3075947699OEA)
from
$2.60
Heater Control Swive
Factory Air – Carbon Shaft Seal Kit (Part No.24021)
from
$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Cohline – Coolant Bleed Screw (Part No.G2032669392COH)
from
$3.36
Coolant Bleed Screw
Original Equipment – Heater Valve Cable (Part No.R201754110OEA)
from
$23.79
Heater Valve Cable
Dansk – Heater Valve (Part No.R302022615DSK)
from
$395.26
Heater Valve
Factory Air – Green Round O-Ring (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
National – Bearings (Part No.5000-KFF)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
KAI – A/C Expansion Valve (Part No.ACX010985)
from
$41.99
New Standard Replacement A/C Expansion Valve
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
APA/URO Parts – APA/URO Blower Motor (Part No.R203184030APA)
from
$300.74
APA/URO manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct Fit Replacement.
- High quality OE electrical components.
- OE quality brushes and bearings.
- Balanced rotor assembly.
DENSO – New Compressor With Clutch (Part No.471-1325)
from
$511.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Mahle – Oil Thermostat (Part No.A633097561MAH)
from
$516.40
Oil Thermostat
Behr – Oil Thermostat (Part No.A633034380BEH)
from
$228.42
Oil Thermostat
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2168)
from
$31.49
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Factory Air – Coolant Temp Sensor Switch (Part No.36445)
from
$41.05
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Color coded for easy identification
- Zinc coated terminal to resist corrosion
Dorman – 2-Wire Pressure (Part No.85141)
from
$14.29
This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – New Compressor New York 209-210 (Part No.T58057)
from
$354.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Validated for fit, form, and function to OE standards
DENSO – New Compressor With Clutch (Part No.471-1129)
from
$389.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Carquest Premium – A/C New; w/o Clutch; w/ 10PA15C Compressor (Part No.T58341)
from
$409.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- O-Rings and gaskets necessary for installation are included.
Carquest Standard – Reman Nippondenso 10P15C Compressor w/o Clutch (Part No.DW57310)
from
$249.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Popular 1986 Porsche 911 Cooling and Climate Controls Categories
1986 Porsche 911 Cooling and Climate Controls
You count on your 1986 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 35 Cooling and Climate Controls ranging in price from $0.99 to $613.78, you’re sure to find everything you need for your 1986 Porsche 911.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 15 different brands like Permatex, Factory Air, and Dorman. 1986 Porsche 911 Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 624 extensive product reviews on 1986 Porsche 911 Cooling and Climate Controls.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1986 Porsche 911 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1986 Porsche 911
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Porsche 911 running right for years to come. In our inventory you’ll find brands like Permatex, Factory Air, Dorman, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1986 Porsche 911 back on the road. Some of the top-rated Permatex products in these categories are:
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1986 Porsche 911, and some of our most reviewed parts include:
FAQs for 1986 Porsche 911 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1986 Porsche 911?
Out of 35 Cooling and Climate Controls for the 1986 Porsche 911, the most popular in our inventory are:
from
$17.49
This product is not rated
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
