2017 Porsche 911 Cooling and Climate Controls
Find Your Specific 2017 Porsche 911 Cooling and Climate Controls
Below you will find various in-demand Porsche Cooling and Climate Controls, components and accessories for your 2017 911. Advance Auto Parts has popular 911 parts like Engine Cooling Parts Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 911 model years including
2012,
2013,
2014,
2015,
2016,
2018,
2019,
2020,
2021 and more. Select a category of 2017 Porsche 911 Cooling and Climate Controls below and start saving instantly.
Popular 2017 Porsche 911 Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2017 Porsche 911s
Carquest Premium – Integrated Thermostat Housing: 180 Degrees (Part No.14768)
from
$74.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1524)
from
$24.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2337)
from
$46.99
Product Features:
See More
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2001)
from
$57.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
KAI – A/C Receiver Drier (Part No.ACM010157)
from
$16.99
New Standard Replacement A/C Receiver Drier
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T33592)
from
$30.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83278)
from
$23.29
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Condenser (Part No.713700)
from
$270.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
Carquest Premium – A/C Condenser (Part No.6653)
from
$153.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
Carquest Premium – Coolant Housing/Water Outlet (Part No.CH1035)
from
$483.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested No special tools required.
Product Features:
See More
Product Features:
- Easy, one step fit and installation
- No special tools required
- Meets or exceeds all OEM standards
Carquest Premium – Coolant Housing/Water Outlet (Part No.CH1034)
from
$585.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested No special tools required.
Product Features:
See More
Product Features:
- Easy, one step fit and installation
- No special tools required
- Meets or exceeds all OEM standards
Carquest Premium – A/C New, with Clutch, with 7SEU17C Compressor (Part No.T158360)
from
$713.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C TXV Type O-Ring Expansion Valve (Part No.T38608)
from
$28.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38609)
from
$33.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Carquest Premium – A/C Block Expansion Valve (Part No.T39519)
from
$51.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C TXV Type O-Ring Expansion Valve (Part No.T38725)
from
$38.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38685)
from
$49.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C New, without Clutch, with 10PA15C Compressor (Part No.T58341)
from
$434.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
DENSO – A/C Compressor with Clutch – New (Part No.471-1325)
from
$515.99
As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Carquest Standard – Reman Nippondenso 10PA15C Compressor w/o Clutch (Part No.DW57341)
from
$244.99
High quality OE replacement part with all components needed to complete the job.
Product Features:
See More
Product Features:
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks and longer life
- Contains R-12/R-134a compatible gaskets, O-rings, or seals to properly replace the product
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Carquest Standard – A/C Remanufactured; w/ Clutch; w/ 7SEU17C Compressor (Part No.DW157360)
from
$453.99
Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.
Product Features:
See More
Product Features:
- O-Rings and gaskets necessary for installation are included.
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Carquest Premium – New Compressor (Part No.T158330)
from
$521.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Every unit is 100% function and leak tested
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
- Very low friction coating used on swash plate to improve durability
- PTFE coated pistons improve performance and reduce wear
- Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
- Matched high-quality needle-roller bearing ensures low friction and high load capability
- Limited Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
- New Compressors meet or exceed OE specifications
- New Compressors are validated for the equivalent of 100,000 miles
- New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
- New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Carquest Premium – A/C New, with Clutch, with 7SB16C Compressor (Part No.T78313)
from
$411.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – New Nippondenso 7SEU16C Compressor with Clutch (Part No.T98316)
from
$782.99
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor.
Product Features:
See More
Product Features:
- Every unit is 100% function and leak tested
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
- Very low friction coating used on swash plate to improve durability
- PTFE coated pistons improve performance and reduce wear
- Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
- Matched high-quality needle-roller bearing ensures low friction and high load capability
- Limited Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
- New Compressors meet or exceed OE specifications
- New Compressors are validated for the equivalent of 100,000 miles
- New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
- New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Upgrade your 2017 Porsche 911 with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2017 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Cooling and Climate Controls for the 2017 Porsche 911, designed to meet your needs without breaking the bank.
From
Engine Cooling Part
replacements to
Air Conditioning Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2017 Porsche 911 at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $21.79 to $1,764.00, with
an average price of $302.49.
Our 13 Cooling and Climate Controls in stock come from 3 trusted brands, so you’re sure to find the right part for your 2017 Porsche 911 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2017 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place.
Start shopping confidently below for your 2017 Porsche 911!
Best-Selling Engine Cooling Parts for 2017 Porsche 911s
Enhance the driving experience in your Porsche with 6 quality Engine Cooling Part components, starting at $24.99.
Motorad – Thermostat Housing Assembly – 180 Degrees (Part No.TA2021)
from
$1764.00
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Coolant Housing/Water Outlet (Part No.CH1035)
from
$483.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested No special tools required.
Product Features:
See More
Product Features:
- Easy, one step fit and installation
- No special tools required
- Meets or exceeds all OEM standards
Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2337)
from
$46.99
Product Features:
See More
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2168)
from
$31.49
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1524)
from
$24.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Most Popular 2017 Porsche 911 Air Conditioning Parts
Customize your Porsche with 7 Air Conditioning Parts products
like AC Compressor Without Clutch,
Expansion Valve and Orifice Tubes, and
AC Condensers, all
priced under $782.99.
Carquest Premium – New Nippondenso 7SEU16C Compressor with Clutch (Part No.T98316)
from
$782.99
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor.
Product Features:
See More
Product Features:
- Every unit is 100% function and leak tested
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
- Very low friction coating used on swash plate to improve durability
- PTFE coated pistons improve performance and reduce wear
- Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
- Matched high-quality needle-roller bearing ensures low friction and high load capability
- Limited Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
- New Compressors meet or exceed OE specifications
- New Compressors are validated for the equivalent of 100,000 miles
- New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
- New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Carquest Premium – A/C New, with Clutch, with 7SEU17C Compressor (Part No.T158360)
from
$713.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Standard – A/C Remanufactured; w/ Clutch; w/ 7SEU17C Compressor (Part No.DW157360)
from
$453.99
Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.
Product Features:
See More
Product Features:
- O-Rings and gaskets necessary for installation are included.
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Carquest Premium – A/C Condenser (Part No.713700)
from
$270.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2001)
from
$57.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83278)
from
$23.29
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Expansion Valve (Part No.T39573)
from
$21.79
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
FAQs for 2017 Porsche 911 Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2017 Porsche 911s?
Out of 13 Cooling and Climate Controls that fit 2017 Porsche 911s, the following parts are the top sellers:
- A/C Refrigerant Pressure Sensor (12541589) – $57.99
- Engine Coolant Temperature Sensor (50082735) – $46.99
- A/C Remanufactured; w/ Clutch; w/ 7SEU17C Compressor (10467117) – $453.99
What’s the price range for 2017 Porsche 911 Cooling and Climate Controls?
Cooling and Climate Control prices for the 2017 Porsche 911 start at $21.79 and go up to $1,764.00 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2017 Porsche 911?
The average price for Cooling and Climate Controls for the 2017 Porsche 911 is $302.49. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Porsche 911 model years?
What are the cheapest Cooling and Climate Controls for my 2017 Porsche 911?
The cheapest 2017 Porsche 911 Cooling and Climate Controls we carry in stock are:
- A/C Block Expansion Valve (12494701) – $21.79
- A/C Filter Drier with Pad Mount (11646306) – $23.29
- Coolant Temperature Sensor (12422980) – $24.99
- Coolant Temperature Sensor (12423025) – $29.99
- Coolant Temperature Sensor (12423019) – $31.49
What types of Cooling and Climate Controls do you sell for my 2017 Porsche 911?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2017 Porsche 911:
Can I get help with 2017 Porsche 911 Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Cooling and Climate Controls and more.
What is your return policy for Porsche 911 Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Porsche 911 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
