Porsche 911 Steering and Chassis Parts
Top Porsche 911 Steering and Chassis Parts Categories
We carry over 111 Steering and Chassis Parts in inventory for the Porsche 911. If you’re looking for aftermarket Steering and Chassis Parts for your Porsche 911, check out all these categories:
Essential Porsche 911 Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.21-5098)
from
$246.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Original Equipment – Washer Hose Clamp (Part No.P7142159044OEA)
from
$4.89
Washer Hose Clamp
APA/URO Parts – Sway Bar Bushing (Part No.L1050650675APA)
from
$18.69
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Rein – Power Steering Rack Boot Kit (Part No.BKK0199)
from
$13.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Rein boot kits come with all the needed hardware and components for the complete repair.
- All components are manufactured to strict engineering standards/specifications in materials and tolerances
- Rein also offers a full line of individual boots.
- Matches original equipment design specifications
Original Equipment – Sway Bar Bracket (Part No.L104033811OEA)
from
$106.72
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
APA/URO Parts – P/S Reservoir Line H (Part No.M2033267589APA)
from
$12.39
P/S Reservoir Line H
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300023265LEM)
from
$81.35
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Original Equipment – Steering Rack Bushin (Part No.M10632241765OEA)
from
$68.82
Steering Rack Bushin
Powercraft – Rack Pinion Seal Kit (Part No.9107)
from
$207.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Steering Tie Rod End (Part No.DW-ES2096R)
from
$15.29
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure improved steering response and durability.
See More
CTR – Sway Bar Link (Part No.L10301671534CTR)
from
$25.52
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
APA/URO Parts – Torsion Bar Mount (Part No.L2083655790APA)
from
$60.10
Torsion Bar Mount
Sebro – Ball Joint (Part No.L20201155814SEB)
from
$272.08
Every Sebro ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Maval – Steering Rack (Part No.M1000408205MAV)
from
$609.71
Steering Rack
Rare Parts – Tie Rod End (Part No.RP29461)
from
$239.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Dorman – Lateral Arm and Ball Joint Assembly (Part No.524-108)
from
$524.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Original Equipment – Sway Bar Bracket (Part No.L1040668474OEA)
from
$48.65
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
Original Equipment – Steering Column Bushing (Part No.M500383861OEA)
from
$36.43
Steering Column Bushing
MOOG – Stabilizer Bar Link (Part No.K750800)
from
$61.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Porsche 911 Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Porsche 911
You love your 911. So we’ve made it easier than ever to help you find Porsche 911 Steering and Chassis Parts in our online catalog. Our inventory holds 111 aftermarket and OEM Steering and Chassis Parts for your Porsche 911, ranging from $3.99 to $1,357.99.
We offer parts from 22 brands trusted to make quality Steering and Chassis Parts for your Porsche 911. Before you buy, take some time to read through customer reviews. We currently have 15,496 reviews of Porsche 911 Steering and Chassis Parts from previous customers. Some of the top rated parts include Stabilizer Bar Link with 4.2 stars and Power Steering Filter with 5.0 stars.
Find your 911 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Porsche 911 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Porsche 911
Our inventory holds Steering and Chassis Parts for your Porsche 911 from 22 trusted brands. You’ll find OEM and aftermarket parts from brands like Driveworks, Cardone, and National, all of which can keep that Porsche happy.
We have Driveworks parts available for your Porsche 911 in categories like Steering Shafts and Power Steering Parts. Some of the top-rated Driveworks parts in these categories are:
FAQs for Porsche 911 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Porsche 911?
Out of 111 Steering and Chassis Parts for the Porsche 911, the most popular in our inventory are:
What are the top-rated Porsche 911 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Porsche 911 based on customer reviews/ratings are:
from
$48.49
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
