Pontiac Tempest Parts

Please Select your Vehicle to See Exact Fit Parts

Pontiac Tempest Body Parts

from

$171.99

New Goodmark Header Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$227.99

New Goodmark 5 Piece Front Reveal Moulding Set, For Hardtop And Convertible Models

Product Features:

For Hardtop And Convertible Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

Product Features:

2 Inch Diameter
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$157.99

New Goodmark Rear Body Cross Bar

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$139.99

New Goodmark Trunk Floor Brace, Over Axle Brace

Product Features:

Over Axle Brace
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.

Product Features:

Flexible model
Easy installation allows for user-friendly operability
Durably designed for longevity
Allows you to keep dust and water away from your car
Highly dense rubber body built

from

$73.99

New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece Driver And Passenger Side

Product Features:

2 Piece Driver And Passenger Side
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.99

New Goodmark Vent Window Handle With Clear Knob

Product Features:

Made Of Die Cast
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$93.99

New Goodmark Driver And Passenger Side Drip Rail Moulding Set, For 2 Door Models

Product Features:

For 2 Door Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

New Goodmark Galvanized Floor Drain Plug, Use As Required

Product Features:

Use As Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$32.99

New Goodmark Trunk Latch

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Goodmark Windshield Glass Stop Clip, Galvanized With Rubber Coat

Product Features:

Galvanized With Rubber Coat
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$142.99

New Goodmark Rear Body Crossmember

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

New Goodmark 4 Piece Outer Door Handle Nut Kit, For 2 Door Handles

Product Features:

For 2 Door Handles
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$101.99

New Goodmark Driver Side T Board Patch Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$14.99

This trunk lock kit contains the needed components necessary to replace the truck lock assembly on the listed vehicle application.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$143.99

New Goodmark Rocker Panel Driver Side Outer

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$45.99

New Goodmark Radiator Support Bushing Set With Hardware

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

New Goodmark Mirror Mounting Kit, Includes Bracket, Gasket And Screws

Product Features:

Includes Bracket Gasket And Screws
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$75.99

New Goodmark Driver And Passenger Side Pair Of Door Latch Mechanical Relays, For Vehicles With Standard Interior

Product Features:

For Vehicles With Standard Interior
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

New Goodmark Door Lock Striker, Allen Head Bolt With Collar

Product Features:

Allen Head Bolt With Collar
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Goodmark Passenger Side Door Sill Plate Without Fisher Body Sticker, For 2 Door Models

Product Features:

For 2 Door Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

New Goodmark Window Crank Handle With Chrome Knob

Product Features:

Made Of Die Cast
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$8.49

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Pontiac Tempest Transmission Parts

from

$11.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$99.99

These universal fit adjustable cables will work in 95 percent of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Product Features:

Universal Fit Adjustable
Less Expensive Than OE Models
Ease Trans. Swap Installation

from

$9.59

AT SEL SHAFT SEAL

from

$5.29

Anchor 2288 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-1979
Weight approx: 2 Lbs

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$206.99

AT BANNER KIT

from

$4.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$118.99

AT CONTR SOLENOID

from

$9.59

AT OIL PUMP ORING

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$3.19

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$46.99

New Goodmark Shift Boot For Manual Transmission Models With Hurst Shifter

Product Features:

Models With Manual Tansmission Hurst Shifter
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$5.49

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE specifications

from

$128.99

This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:

Adjust Shift Points Of Transmission
Useful For Light Vehicles
For Low Rear End Gear Ratio
Or Useful If It Is Conversion

from

$306.99

These B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes. Adds 3 quarts to the Transmission.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$3.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.99

AT OIL PAN GASKET

from

$31.49

B&M cable bracket fits GM Powerglide transmissions.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
B&M quality

from

$55.99

Cable Bracket – Powerglide (Bandit style shifters only) APPLICATION: For Powerglide with Pro Bandit (Composite X and Magnum Grip) and rear entry cable.

Product Features:

Fully Polished/Bright Anodized
Narrow Design-w/No Knobs
Lightweight Mechanism
Reverse Exit Cable Design
Neutral Safety Switch Built-In
CNC Machined-6061-T6 Aluminum
Mounts Through Bottom Of Shifter
Flush Countersink Hardware Wont Rub Body Panels

from

$528.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat app

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements

from

$869.99

With its cutting-edge Magnum Grip design combined with the race-proven mechanics, the Magnum Grip Pro Bandit offers the unbeatable combination of race performance, functionality, and looks! This race shifter comes set up for 2-speed Powerglide transmissio

Product Features:

Fully Polished/Bright Anodized
Narrow Design-w/No Knobs
Lightweight Mechanism
Reverse Exit Cable Design
Neutral Safety Switch Built-In

Pontiac Tempest Clutch Systems

from

$21.49

M/T FLYWHEEL BOLT

from

$125.99

LuK rigid flywheels, a smart alternative to resurfacing,¿offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Product Features:

Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
LuK flywheels are always new and never remanufactured.
LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
LuK’s engineering and quality materials contribute to a longer service life for the flywheel and clutch system.
Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.

from

$184.99

Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
No resurfacing required
Improves performance

from

$5.99

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.29

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.49

This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1075.99

Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.

Product Features:

Hydroformed From Premium Quality Steel
Uniform Thickness For Superior Strength
Mig-Welded Threaded Inserts
Stress Relief In A Stronger/Safer Bellhousing
Precision Machined Assures Proper Bolt Hole
Includes Block Plate And Hardware
Approved By Major Racing Sanctioning Bodies
Meets SFI 6.1 Specifications

from

$30.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$31.99

FLYWHEEL SHIM

from

$29.99

ATP Flywheel Shim

from

$10.99

New Goodmark Clutch Bellcrank Pivot Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$29.49

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$71.99

Keeps dust, rocks, and debris out of the flex plate and torque converter. *Needs modification for Olds/Pontiac Starters on the driver’s side.

Product Features:

Heavy Gauge Chrome Plated Steel
Direct Replacement Bolt On

from

$14.99

AT CLUTCH PLATE

from

$7.49

AT CLUTCH PLATE

from

$10.49

AT CLUTCH PLATE

from

$749.99

Power Train

from

$145.99

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
Kits include everything needed for a quick, correct fit and reliable clutch performance.

from

$186.99

Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
Kits include everything needed for a quick, correct fit and reliable clutch performance.

from

$1075.99

Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp

from

$7.99

New Goodmark Pair Of Clutch Bellcrank Felt Seals

Product Features:

Pair
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Pontiac Tempest Automotive Accessories

from

$40.99

New Goodmark Rear License Plate Bracket, Also Fits Chevelle/Malibu Models Except Wagon

Product Features:

Also Fits Chevelle/Malibu Models Except Wagon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

New Goodmark Driver Or Passenger Side Sun Visor Support, For All Models Except Convertible

Product Features:

For All Models Except Convertible
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 228″ L x 60″ W x 51″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
This car cover fits vehicles like: Dodge Challenger, Chevrolet Camaro, Toyota Camry, Chevrolet Bel Air, Chevrolet Chevelle

from

$99.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 228″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 228″ L x 60″ W x 51″ H.
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$139.99

The Protector V car cover features 5 durable layers to ensure 100% waterproof protection. This car cover is made from three layers of polypropylene that rests on top of a fully waterproof membrane. The inner most layer is made from a nonabrasive fleece material so you won’t have to worry about scratching your vehicle. The Protector V is UV resistant, waterproof, breathable and durable making it ideal for all-weather protection. Cover comes with a built in strap and buckle system. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 228″ L x 60″ W x 51″ H
This car cover is made from 5 durable layers – our thickest cover yet!
This car cover is 100% waterproof and UV resistant for superior outdoor protection
This auto cover has a soft fleece inner lining that pampers your vehicle’s paint
This car cover fits vehicles like: Dodge Challenger, Chevrolet Camaro, Toyota Camry, Chevrolet Bel Air, Chevrolet Chevelle

from

$3.99

New Goodmark Sunvisor Tip, Rubber, 2 Required

Product Features:

Rubber 2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Goodmark Blue GM Door Jamb Decal, For All 1968-1970 GM Cars, 2 Required

Product Features:

For All 1968-1970 GM Cars 2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Door Armrest Base, Driver Side, Pearl, 11 Inch

Product Features:

Driver Side Pearl 11 Inch
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$93.99

New Goodmark Driver And Passenger Side Pair Of Rear Door Armrest Bases

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

New Goodmark Door Armrest Base, Driver Side, White, 11 Inch

Product Features:

Driver Side White 11 Inch
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Door Armrest Base, Passenger Side, Red, 11 Inch

Product Features:

Passenger Side Red 11 Inch
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Door Armrest Base, Passenger Side, Dark Green, 11 Inch

Product Features:

Passenger Side Dark Green 11 Inch
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Door Armrest Base, Passenger Side, Blue, 11 Inch

Product Features:

Passenger Side Blue 11 Inch
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$129.99

New Goodmark Driver And Passenger Side Pair Of Roof Rail Weatherstrips, For 2 Door Hardtop Models

Product Features:

For 2 Door Hardtop Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$83.99

KATS was created and developed as a truly effective product for cold weather and hard starting problems. Owners and operators of diesel and gas operated equipment have long known that delayed starts and slow starts mean big money losses in labor, maintenance and operating revenue. KATS Circulation Tank Heaters are designed to do one thing – Start engines FAST! KATS Circulation Tank Heaters are truly superior heavy duty patented products. This heater is thermostatically controlled 135-175 degrees. Our components are 100% made in the USA. Customers will find KATS Circulation Tank Heaters are unbeatable in pricing, quality and performance anywhere. KAT’S manufacturing quality control procedures assure you the very best anytime you install and operate a KAT’s system.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$36.49

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$81.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$56.99

Lower Radiator Hose Heater

Pontiac Tempest Interior Products

from

$28.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Dimmer Switch enhances driver comfort and visibility by allowing easy customization of dashboard and interior light levels. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$10.49

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$13.49

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$13.99

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$6.99

New Goodmark Headliner Bow Center Clip, 6 Required

Product Features:

6 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.49

This accelerator pedal pad is designed to match the fit and appearance of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this accelerator pedal pad is designed to match the fit and appearance of the original part on specified vehicles
Ideal solution – this pad is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

New Goodmark Pair Of Brake/Clutch Pedal Bumpers, For Assorted GM Models

Product Features:

For Assorted GM Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$33.99

These universal horn accessories are ideal for applications requiring a horn where a horn was not originally provided or to replace a horn where the application no longer is available.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$6.99

New Goodmark Driver And Passenger Side Pair Of Black Door Lock Knobs, Paint To Match Other Colors

Product Features:

Paint To Match Other Colors
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$41.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Turn Signal Switch allows drivers to easily activate turn signals to indicate lane changes or turns, improving communication with other road users and enhancing overall driving safety. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$11.99

New Goodmark Cadmium Plated Rear Seat Belt Bolt With Sealant

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.99

New Goodmark Speedometer Cable Retaining Clip

Product Features:

Made Of Plastic and Metal
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$27.99

New Goodmark Seat Back Release Button For Models With Bucket Seats, Located Center Of Seat Back, 2 Required

Product Features:

Located Center Of Seat Back 2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$7.99

New Goodmark Horn Contact, Eyelet, And Spring

Product Features:

Eyelet And Spring
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

New Goodmark Pair Of Bucket Seat Headrest Guides

Product Features:

Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

New Goodmark Black Headliner Front Windlace With Center Mirror Cutout

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$54.99

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

Use To Install All Classic, Challenger Or Signature Series Wheels
Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig
Use with all Grant Classic/Challenger/Signature Steering Wheels

from

$12.99

New Goodmark Bucket Seat Bumper Set, Set Of 2 With Screws

Product Features:

Set Of 2 With Screws
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$59.99

New Goodmark Bucket Seat Mount Bracket, Set Of 4 Brackets

Product Features:

Set Of 4 Brackets
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$24.99

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.29

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Looking for the best Pontiac Tempest aftermarket replacement parts? Replacing worn and broken parts on your Pontiac Tempest? Check out our online catalog to find the best selection of aftermarket Pontiac Tempest parts as well as real user reviews on Pontiac Tempest replacement parts. Make an informed decision about every component you add to your Tempest.

At Advance Auto, we’ve got you covered when it comes to getting your Pontiac Tempest in tip top condition. We’ve got over 2,573 Pontiac Tempest parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Pontiac Tempest parts catalog to compare OEM and aftermarket parts for your Pontiac Tempest.

Whether you need Pontiac Tempest body parts, interior components, or custom Pontiac Tempest parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Pontiac Interior Products same day? No problem, you can pick up Tempest parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Pontiac Tempest parts has never been easier.

Advance Auto customers frequently search for the following types of Pontiac Tempest auto parts. Check out customer reviews and ratings, and compare prices on the following Pontiac Tempest parts:

People also search Advance Auto for these popular years of the Pontiac Tempest:

Pontiac Tempest Parts

KAI – Body Header Panel (Part No.GMK433103067)

KAI – Windshield Molding (Part No.GMK403152566S)

KAI – Hood Insulation Clip (Part No.GMKHWB2401)

KAI – Trunk Crossmember (Part No.GMK403179066)

KAI – Trunk Floor Brace (Part No.GMK4032745681)

AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)

KAI – Liftgate Seal (Part No.GMK403171466S)

KAI – Window Crank Handle (Part No.GMK403241969)

KAI – Body Molding Set (Part No.GMK403192566S)

KAI – Floor Plug (Part No.GMK403051264A)

KAI – Deck Lid Latch (Part No.GMK404270559)

KAI – Windshield Glass Clip (Part No.GMKHW2076)

KAI – Frame Crossmember (Part No.GMK403079064)

KAI – Handle Hardware Kit (Part No.GMK4021440701S)

KAI – Floor Pan (Part No.GMK4032515681L)

Carquest Premium – Trunk Lock (Part No.TLC1052)

KAI – Rocker Panel (Part No.GMK403047064L)

KAI – Body Mount Set (Part No.GMK433232668S)

KAI – Mirror Hardware Kit (Part No.GMK4011410661S)

KAI – Door Handle Remote (Part No.GMK4020443671P)

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

KAI – Door Lock Striker (Part No.GMK403060664)

KAI – Door Sill Plate (Part No.GMK403257568RC)

KAI – Window Crank Handle (Part No.GMK403042165)

Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)

Felpro – Manual Transmission Gasket Set (Part No.TS 5190)

B & M – Kickdown Cable For TH-350 Transmission (Part No.30287)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2288)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Driveworks – Taper Bearing Set (Part No.S-A-2)

ATP – AT BANNER KIT (Part No.SM-11)

National – Bearing Race (Part No.LM67010)

ATP – AT CONTR SOLENOID (Part No.SE-1)

ATP – AT OIL PUMP ORING (Part No.SO-21)

Schaeffler – Cone (Part No.KLM603049)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

KAI – Shifter Boot (Part No.GMK4331508671)

Dorman – Clutch Pilot Bushing (sold by each) (Part No.690-023)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)

B & M – Governor Recalibration Kit For TH-700R4, TH-400 and TH-350 Transmission (Part No.20248)

B & M – Transmission Cast Deep Pan, Brushed Finish TH-350 (Part No.30280)

Motive Gear – Differential Pinion Seal (Part No.2043)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

National – Multi-Purpose Seal (Part No.7038SA)

ATP – AT OIL PAN GASKET (Part No.CG-10)

B & M – Cable Bracket (Part No.70460)

B & M – Cable Bracket (Part No.70469)

B & M – Automatic Shifter, Megashifter-Right Hand Drive (Part No.80685)

B & M – Automatic Shifter, Magnum Grip Bandit (Part No.81045)

ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)

LuK – Rigid Flywheel (Part No.LFW131)

ATP – Manual Transmission Flywheel (Part No.Z-294)

Dorman – Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (sold by each) (Part No.690-014)

Dorman – Clutch Pilot Bushing (Part No.690-014.1)

Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)

Lakewood – Bellhousing: Olds-Pontiac 65-77 (Part No.15100)

National – Multi-Purpose Bearing (Part No.7109)

ATP – FLYWHEEL SHIM (Part No.GS-3)

ATP – ATP Flywheel Shim (Part No.GS-8)

KAI – Clutch Bellcrank Kit (Part No.GMK4041951587S)

National – Clutch Release Bearing (Part No.614018)

National – Clutch Release Bearing (Part No.614037)

Mr. Gasket – Flywheel Dust Cover (Part No.5135)

ATP – AT CLUTCH PLATE (Part No.SC-29)

ATP – AT CLUTCH PLATE (Part No.SC-30)

ATP – AT CLUTCH PLATE (Part No.SC-26)

Hays – Power Train (Part No.85-113)

LuK – Repset With Release Bearing (Part No.04-021)

LuK – Clutch Kit: 10" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-003)

Hays – Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.92-1004)

KAI – Clutch Bellcrank Felt (Part No.GMK4041951589P)

KAI – License Plate Bracket (Part No.GMK433088565)

KAI – Sun Visor Bracket (Part No.GMK4030941641)

Budge – Ultra Car Cover, Gray, Size 4: Fits up to 19′ L, 3 Layers, Water Resistant, Scratchproof, Dustproof (Part No.D-4)

Budge – Rain Barrier Car Cover, Grey Size 4: Fits Cars up to 228 in. L, Outdoor Protection (Part No.RSD-4)

Budge – Protector V Car Cover, Gray, Size 4: Fits Cars Up To 19′ (228") L, 5 Layer All Weather Protection (Part No.5LF4)

KAI – Sun Visor Cap (Part No.GMK4030941645)

KAI – Door Decal (Part No.GMK4012453681)